What to do with the leftover latex paint for decoration

How to deal with these leftovers is quite a headache for many families, keeping it to occupy space, throwing it away and reluctant to do so, for fear that they will need to buy another one when they need it in the future. Many families choose to dispose of the remaining materials to the decoration company at a low price after decoration, send them to relatives and friends, or throw them away. But based on his many years of renovation experience, the vast majority of these materials can be properly retained for bumps in moving furniture and tinkering later in life.

Will there be color differences in post-repair with the remaining decoration materials? This is the main concern of many families. Repairing with these materials will certainly cause some color differences, but using leftover materials for repairs can minimize the difference in decoration compared to buying a similar product again.

Therefore, it is necessary to properly preserve part of the remaining decorative materials. If you have space at home to store these materials, you can choose to store materials such as tiles, floors, latex paints, paints, etc.

When there is partial damage to the walls, tiles and floors at home, it can be repaired in time, saving time, effort and money. If you buy a new product without materials after the above situation occurs, even if you buy the original product of the same model, you will not be able to buy the same batch of product and the same color number due to the passage of time. For example, the tiles used in home decoration, different styles and different colors of tiles, floors, and kicking lines can be properly preserved two or three.

In addition, the white latex paint does not have to be retained because it is not affected by color difference. The remaining colored emulsion paint used can be appropriately retained. This is because repairing the damaged paint surface with the emulsion paint left over from the construction can reduce the color difference.

At the same time, the decoration family should also remember the proportion of colored latex paint, so as to facilitate the color adjustment when buying the paint again. The preservation of latex paint is relatively simple, and it is enough to cover the latex paint bucket with a lid and put it in a cool place. At this time, decorating families need to pay attention to the shelf life of latex paint.

Usually, the storage time of latex paint mixed with water is 10-20 days, and latex paint without water should also be used within the shelf life, after all, latex paint can only be stored for half a year after opening. Finally, there is the method to pay attention to when preserving these materials: in order to avoid the discoloration of tiles, kicking lines and other materials caused by moisture, it is best to wrap the tiles and skirting lines in plastic bags and place them in a relatively dry environment.

Of course, there is a way, according to the way I said, I promise to clean it up for you.

Prepare the tool:Steel wool, antidote, rag

Step 1,Spray the adhesive to the area where there is latex paint

There are now things that specialize in cleaning glue, which is why I'm telling you that you can definitely clean it up.

Step 2,Use a steel wool ball to clean the glue

After waiting for 10 minutes, you can use a steel wool ball to brush off all the glue.

Step 3,Clean up with a rag

After cleaning, the residue of glue and the residue of the degumming agent are left, which must be cleaned with a damp rag and then brushed with clean water.

It only takes three simple steps to complete, and now that science and technology are developed, there are a lot of degels, paint stripping water, cement cleaners and other convenient cleaning items, our boss surname himself can clean up all kinds of traces at home, very convenient, as long as a light spray, a few minutes can be done.

When the latex paint dries, it sticks firmly to the fibers, creating a permanent stain. Therefore, latex paint should be disposed of as soon as possible after it has been splashed on the surface of the item. First, gently scrape off excess latex paint or clumpy stains with a blunt blade, then gently wipe from the center of the stain outward with a sponge dipped in a dry cleaner such as AFTA cleaning solution.

Treat the stain with a dry stain remover and cover it with an absorbent pad dipped in a dry stain remover that will take long enough to remove all stains. Once the absorbent pad is stained, it should be replaced. To keep both the absorbent pad and the stain soaked with a dry stain remover.

Soak stains and residue loosely, rinse with dry cleaning solution and allow to dry. If the stain is still there, wipe it off with a sponge dampened with water and treat the stain with a water-based stain remover and a few drops of ammonia. (Silk and wool cannot be treated with ammonia.)

Cover the stain with an absorbent pad soaked in a water-based stain remover. Cover long enough to remove all stains. Once the absorbent pad has sorbed the stain away, it should be replaced.

Stains and absorbent pads should always be soaked in water-based stain remover and ammonia. Next, rinse with clean water and repeat if necessary. Finally dry thoroughly.

If handling carpets, be sure to blot off excess liquid with a clean absorbent pad.

Need to prepare: scouring pad, glue remover. Here's how it works:

1. First of all, spray an appropriate amount of adhesive on the ground stain of latex paint, and the adhesive can dissolve the latex paint on the ground.

2. Wait for the next ten minutes, and the decoration latex paint on the ground will slowly soften and dissolve.

3. Then take out a 100 clean rag that has softened and dissolved the latex paint and wipe it clean.

Latex paint precautions:

1. Be sure to read the construction instructions in the product packaging text carefully before use to obtain reliable and satisfactory coating results.

2. Try to open all doors and windows before starting operation and use to ensure that there are sufficient ventilation conditions in the construction area.

3. If it is allergic**, you should always wear protective equipment during use; In case of eye contamination, rinse immediately with plenty of water and seek medical attention.

4. Do not allow children or pets to enter the construction area, and place the product out of reach; In case of contamination, rinse immediately with plenty of water and seek medical attention.

5. Effectively separate, cover and shield the area of wood products and walls, better maintain the cleanliness of the construction site, avoid chaotic construction operations, and operate in accordance with the construction sequence of first applying wood paint and then applying latex paint after drying.

6. When the paint is overturned and leaked, it should be collected and disposed of reasonably after covering it with sand or soil, and the paint should not be poured into the sewer or drain pipe to prevent blockage.

Water-based exterior wall paint can be soaked with water, and it will be wiped after a while, or it can be removed with a flat shovel with water and sand, and the principle is not to damage the ground. If it is an oil-based paint, it will not be easy to do when it dries. Yunquan water-based wall paint, not only zero formaldehyde, but also can remove formaldehyde and strong coverage, can be scrubbed, even if accidentally get on the ground, it is also very easy to clean, they now have a Tmall store.

First, how to clean up the low latex paint all over the ground1. Now many people will try to choose good materials when decorating, latex paint is indeed beautiful and environmentally friendly, but it is also very common to splash on the body or splash on the ground when brushing, if it accidentally drops to the ground, while the latex paint has not dried, you can find a wet towel to wipe, the effect is very good.

3. Buy professional cleaners. If there is a lot of latex paint on the ground at home and cannot be removed, you can try to buy asphalt cleaner on the Internet, the cleaning effect of this cleaner is better, and it can also remove the latex paint on the ground, because the ingredients in this cleaner can directly dissolve the latex paint, which can be bought in the supermarket or online, and it is relatively cheap.

2. ConclusionIf you accidentally drip latex paint everywhere when you are decorating the house, and the wooden floor in the home is not easy to clean, it is best to ask professional personnel to help clean up, which is also the most convenient and effective.

You can use dish soap to wipe the floor, you can also use a small spatula to remove it, you can choose white vinegar, you can use hand sanitizer or soap. Emulsification can also be performed.

It can be soaked in hot water and then cleaned, or it can be cleaned with some professional detergent, so that the latex paint can be cleaned.

You can take a small shovel to clean up, or you can take white vinegar to wipe it. It can be removed very well.

Summary. Hello, the original latex paint wall can be painted with an extra layer of latex paint, but you need to look at the putty layer to decide, but if it is an old house, especially more than 8 years old, it is best to reprocess all before painting.

I have a latex paint wall and want to repaint the latex paint, how do I need to deal with it?

Hello, the original latex paint wall can be painted with an extra layer of latex paint, but you need to look at the putty layer to decide, but if the change is an old house, especially more than 8 years old, it is best to know that all the losses are reprocessed and then painted.

The whole is good, but there are small cracks.

Hello, if this is the case, it is recommended to clean it all up and then reapply the latex paint.

Dispose of those cracks, can you directly apply latex paint?

It is recommended to shovel it all and re-brush it.

Re-scrape putty.

Re-scrape putty.

Yes. Do you want to tear down the whole house?

Yes, there are just a few cracks, do you need to shovel them all?

In this way, it will be done again and perfectly.

Then just shovel out the area near the crack.

1. Paint and decorate the newly brushed paper mortar wall, and wait until the outer layer of lime is completely dry, otherwise it will cause spots on the wall and affect the beautification effect.

2. When refreshing the color on the dark old lime wall, including the wall with more spots, you should first brush it with white ash water, and then set the refreshing color after drying and whitening.

3. If the lime wall has not been painted for more than half a year, add acidic color drywall powder, if green, sky blue and other colors, it is easy to produce neutralization and overcoloring, so you need to pay attention.

4. In the process of brushing lime slurry, the lime slurry should be constantly stirred, otherwise, the lime slurry will precipitate, and there will be stripes of different shades on the wall after brushing.

5. When painting, you should master the principle of top-down, one-stroke, vertical brush, and horizontal brushing from left to right, but you should pay attention to it, and do not miss the pen.