From hydropower pre embedding to construction details, do you know how to make the suspended TV cabi

Now the house is decorated, 10 have 9 background walls are made of suspended TV cabinets, why are hanging TV cabinets so popular now, as early as ten years ago eliminated design, and now it has been turned out, but the practice has been greatly improved, the long TV cabinet with a large white wall, plus a large laser TV or projection screen, have you been planted by such an effect?

We all know that such a design is good-looking, why do all kinds of overturns, falling deformation has become commonplace, seemingly simple design, but stumped a lot of workers, there is a gap between the wall and the cabinet after the well.

Many workers do not know the real sense of the practice, whether it is custom-made or carpentry, the popular practice is not to use the iron triangle support point, is to punch through the wall screws, not to mention the use of steel structure processing, in short, the owners of the community do not understand, in the end only need to see the appearance of that thing.

It's hard to say whether this behavior is strong or not, only by luck, what should the suspended TV cabinet do to be more solid? From the small details of hydropower pre-embedding to engineering construction, let's make this matter clear and <>

1. Before doing it, you should determine whether the home is suitable for making a suspended TV cabinet, if you want to assemble a 75-inch TV, the size of the TV cabinet can not be less than 3 meters, the 75-inch TV is 1.66, if you make a 2-meter growth TV cabinet, the proportion is so ugly, you can do it long and try not to make it short.

2. Specifications are illustrated with 3 meters of TV cabinets, the most ideal specification for thin thickness is 20 cm, suspended in the air 18 cm, the maximum does not have to be higher than 20 cm, the depth is 30 cm, the TV cabinet plus the overall suspension in the air is put into the relative height to ensure that it is about 40 cm, there is a little deviation is fine.

Before the hydropower project, the embedded parts of the five zero pipelines, the socket switch was embedded in the middle of the square, and the design scheme of the upper box door was made, and a light strip decoration design could be added below, and the effect was obvious.

3. Whether the suspension method is a load-bearing beam or a block, it will never fall off in the way I said, many people have made a large overturn, a large part of the expansion bolts used between the wall and the wooden cabinet are determined, and the workers with a conscience will also replace the filling wall with a red brick wall, fixed with wall screws, and generally will not fall, but it will be deformed for a long time, and the gap will be larger.

The same is true for the steel frame structure, which looks very hard and durable, but it will be deformed, and the cost-effective construction method is like this, firstly, fix a gypsum board on the wall first, and hit it obliquely with nails, and then fix a layer in this way to improve the stressed area.

Secondly, the TV cabinet is fixed in the bearing plate with self-tapping screws with self-tapping screws, and the weighing problem can be achieved without too complicated hardware steel frame structure, and the wooden board is not connected to the wall, which largely prevents the increase of edge clearance and deformation problems.

Such as lightweight walls, plasterboard walls, block walls, and so on. If you have one of these types of walls, then I don't recommend you do them.

It's not that you can't do it, because as long as your workers' craftsmanship is not good, there is a high probability that there will be unstable construction on these kinds of walls.

When we make this suspended TV cabinet, we must pay attention to its form, and we must also explain it to the decoration master. It needs to be more solid.

During the construction process, the suspended TV needs to reserve the position of water and electricity to be buried, and the distance between it and the ground must be measured. You need to find a professional job to do it.