How to disassemble the rear seats of BMW? How to disassemble and assemble the rear seat of BMW 7 ser

Unscrew the screws and unplug the wire.

The rear seats of the BMW can be reclined and the screws can be removed if you want to remove them.

Hello, first, disassembly method:

On both sides of the head of the rear seat, near the window, there will be handles, pull the handle, the backrest of the rear seat can be turned forward, and most of the cushion parts of the rear seat are squeezed directly to the rear of the car, and then lifted up to come out.

Second, the rear seat lifting method:

1.Under the heads on both sides of the rear seats, there is a switch to push forward after pressing it, 2Foldable backrest, open the rear trunk under the seat (if you can't see it, it may be pressed under the seat) There is a black strap to pull back and lift the seat up, 3Attach the hook to the front seat header and adjust the strap.

The rear seats are pushed up and pulled up, and if you lean on the quilt, you can pull the black cover plate at the front, and you can also attach it if you tear it off, and there are 3 screws to remove it, and 5 under the seat cushion. Tear it down and take it down.

If you pull the seat up, it will fall off. The backrest is screwed. [Car questions, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

1. Pull the strap in the middle of the seat, pull the inside of the strap and turn it up to remove the back seat.

2. Pull the pull strap and take off the back seat, and you can see that there is a pull hook on the left and right under the rear seat.

3. Remove the left seat hook first.

4. Remove the right seat hook.

5. Press the door position of the back back to pull the hand button, and the back can be turned down.

6. Note that there is a Senxiao seat belt on the back, which also needs to be removed. So the seat is removed.

Disassembly method: On both sides of the head of the rear seat, the cavity balance near the window gives way, there will be a handle, pull the handle, the backrest of the rear seat can be turned forward, the cushion part of the rear seat, most of it is directly to the rear of the car to squeeze the cushion, and then the back of the Wu Bureau is lifted up to come out.

Rear seat lift method:

On both sides of the rear seats, there is a switch pressed and pushed forward, 4

Foldable backrest, open the rear trunk under the seat (if you can't see it, it may be pressed under the seat) There is a black strap to pull back and lift the seat up

BMW 3 Series. The rear seat removal needs to lift the seat cushion lock position forcefully, and the seat cushion can be unlocked by dismantling, and then the seat cushion can be moved forward to start installing the seat cover, the specific operation steps are as follows:

1. Hold the position of the seat cushion corner with both hands.

2. Stare hard and lift up to unlock it.

3. The other side uses the same square travel method.

4. Put the seat cover on the cushion.

5. Tighten the fastening rope on the back.

6. Press the cushion firmly to complete the operation.

BMW 730 rear seat removal method:

1. Pull the middle position of the rear seat, pull the strap inside, and turn up the old back seat.

2. Flip up the back seat and pull the left and right hooks under the rear seats.

3. Take off the retractor of the left seat.

4. Remove the retractor of the right seat.

5. Pull down the head of the head of the back against the car and lift the hand, and turn down the back.

6. Remove the seat belt at the lower back so that the rear seats are removed.