Decoration wall solid, interface agent, 108 glue is the same

The wall solid and the interface agent are the same, but these two are different from the 108 glue, the wall solid interface agent is a replacement product of the glue, and the function has been optimized in all aspects. However, they can be used to lay a base before scraping putty, and the main function is to increase the adhesion between putty powder and the wall, and some also have waterproof and moisture-proof functions. Some friends use them to treat wall desanding, but it can only be said that they still have some effect, but they are temporary methods to treat the symptoms but not the root cause.

If the wall desanding is treated, it is recommended to use a special material, that is, the wall desanding repair solution.

Hope it helps.

1. In terms of function: it is also to lay the foundation, consolidate the wall, and facilitate subsequent construction.

2. In terms of attributes: the three can be glue and paint.

3. The name is different.

Construction technology: 1. The construction environment must be dry, the relative humidity should be less than 70%, and the ventilation should be good. The temperature of the base surface and the environment should not be lower than +5.

2. Preparation of the base surface: the base surface should be clean, not loose, no dust, grease, moss, carpet glue, etc. should be removed, and the loose and cracked parts should be chiseled and repaired in advance.

3. Stirring: Add 10 liters of water to each bag of powder (20 kg) (water: powder =

1) It must be stirred with electric equipment and stirred into a uniform slurry.

4. Brushing and drying: Use a roller or brush to brush the slurry to the base surface, without missing the brush, and then let the painted surface dry (about 12 hours).

Extended Information: Classification and Performance:

Common interface agents are divided into two types: dry powder type and emulsion type.

1. Dry powder interface agent.

Dry powder interface agent is a powder composed of inorganic cementitious materials such as cement, fillers, polymer rubber powders and related admixtures. It has high adhesion, excellent water resistance and aging resistance. When using, mix with water in a certain proportion and stir for use.

2. Emulsion-type interface agent.

The emulsion-type interface agent is made of chemical polymer materials as the main component, supplemented by other fillers. The emulsion type is divided into one-component and two-component according to its composition and applicable base layer, and the two-component product needs to be mixed with cement in proportion when used. Emulsion-type interface agents (divided into one-component and multi-component).

The wall solid and the interface agent are both brushed on the wall of the base construction, the difference between the two is not very big, but there will be a difference in color. In the final analysis, the wall is actually a kind of glue, and the effect is naturally different in different scenes, so you can see the detailed introduction brought.

Which effect is better, wall solidification or interface agent.

The way of use is different, the material is different, the color is different, the use technique is different, and the combination strength is different. I think it's better to be stronger.

Of course, in fact, to some extent, it cannot be said that the wall is better or the interface agent is better, because each has different use scenarios, uses and characteristics. The wall surface after the wall solid coating can clearly find out whether the wall is missing or less coated, so as to prevent the decoration quality from being affected by the leakage coating. When you choose to buy interface agents and wall fixing, ask the decorator for their opinion.

The wall is fixed directly or mixed with water.

It is necessary to carry out the water before brushing, and if it is brushed directly, it will lead to the phenomenon that the wall is fixed and the brush does not move during the later painting construction. Cracked wall solid is a kind of water-based adhesive processed by polymer and various additives, the appearance is generally milky white glue, with good permeability, can fully infiltrate the wall base, so that the base layer can improve the bonding strength, prevent hollowing, suitable for brick-concrete wall plastering or batch scraping putty before the base compacting treatment.

Is the wall solid 108 glue?

The wall solid is not necessarily 108 glue, in fact, it belongs to the same product. The wall solid has become an interface agent, and a better alternative to 108 glue, because both its penetration performance and adhesion ability are better than 108 glue.

108 glue will not be used when decorating, mainly because the environmental protection of this glue is very poor, it is a slightly white transparent glue, although the bonding effect is better, but volatilizes toxic gas, so it has been gradually eliminated by the market.

It is recommended to choose an interface agent or choose a wall solid, in fact, the wall solid is also a kind of interface agent, and environmental protection factors should also be taken into account when decorating.

The interface agent (some are called 'wall shovel') is suitable for the interface treatment of concrete, aerated concrete, brick-concrete surface batch scraping putty or plastering before the base layer, and is suitable for the base wall before pasting tiles for artificial 'wool', which is not only for cement brushing, but also for pasting wall cloth.

108 glue is suitable for pasting wall and floor tiles in indoor room temperature environment, and is also suitable for wallpaper pasting. However, the base layer should be dense and free of floating ash, such as the wall is loose or smooth, and the interface treatment needs to be carried out with an interface agent.

In fact, a bucket of interface agent on the market is only a little bit worse than that of 108 glue (the interface agent is slightly expensive), but 108 glue cannot replace the interface agent.

108 glue is generally mixed in cement mortar to increase the viscosity of cement mortar and the firmness of tile paste. The interface agent is mainly used to clean the base layer of the wall and improve the adhesion of the wall. 108 Add cement sand, or putty.

The interface agent is literally understood, which is the interface, that is, the shabu on the outside appearance.

In general, it is necessary to use it, mainly to play the role of wall solidification, which can increase the adhesion and adhesion of putty and prevent the putty from falling off.

108 glue is a new type of polymer synthetic building adhesive, the appearance is a slightly white transparent colloid, good construction workability, high bonding strength, economical and practical, suitable for the pasting of walls and floor tiles in indoor and normal temperature environments.

108 glue has stable viscosity, strong adhesion, mildew resistance, strong alkali resistance, good compatibility with other water-soluble glues, clear and transparent, frost dissolution resistance, good film-forming, and has a wide range of uses. The glue is made of corn starch as the basic raw material, adding sodium hydroxide, monochloroacetic acid, urea, sodium phosphate, acrylonitrile, sodium hypochlorite or hydrogen peroxide, sodium bisulfite and tap water.

108 glue is a kind of interface agent, which is used to solidify the dust on the surface of the wall, which is conducive to the firm bonding between two different treatment layers.

In general, it will be used to prevent the wall from falling off and other problems, which can protect the wall well.

In fact, it is the effect of wall solidification, which can increase the adhesion and adhesion of putty, prevent putty from falling off, or make an anti-cracking base cloth (liquid rag) before scraping putty, which has the effect of moisture-proof and mildew-proof, increasing the adhesion and adhesion of putty.

Yes, 108 glue can attach the floating ash of the wall to the wall.

Bonding effect, so that the adhesion of the wall is better, and the effect is better when painting.

108 is used for engineering Families are used for reef king sturdy.