How to install a wall hung boiler for the decoration of a new house? Do you know?

Updated on home 2024-07-14
7 answers
  1. Anonymous users2024-02-12

    Spring is an excellent time of year for decoration, many friends will take advantage of this good time to buy their favorite gas wall-hung boiler, that way, not only to overcome the problem of home heating, but also to give 24 hours of boiling water for the family, without having a mine at home, you can enjoy high-end community life. However, the installation of the gas wall-hung boiler can not be arbitrary, it is a collection of natural gas, water, electric energy complex machinery and equipment, so it needs to be installed by professional staff, and only the standardized installation can fully play its safety, environmental protection and energy saving, convenient and fast advantages. Below, Madis shares with you some requirements for the installation of gas wall-hung boilers.

    First of all, the customer's home heating system must have a separate system software, secondly, there needs to be natural gas supply at home, and there is a suitable wall-hung boiler installation site (load-bearing wall), which is conducive to connecting various pipelines (heating and intelligent return pipeline, drinking water and boiling water output pipeline, etc.), with a three-hole power plug and a stable switching power supply.

    The installation of the wall-hung boiler should first understand the requirements of the smoke exhaust system, waterproof and rainproof, cold-proof, etc., and then consider whether the pipeline is feasible and beautiful. Special Note:

    The wall-hung boiler generally cannot be installed outdoors, unless the installation site and other ancillary equipment are cold-proof.

    The wall-hung boiler is a machine that gives pyrogen, and the equipment such as gas sheet and floor heating is the terminal equipment for heat exhaust, and the combination of the two can achieve the purpose of heating. For newly renovated houses, the heating system (i.e., radiator pipes, floor heating pipes, etc.) related to grooves, holes, pipeline connections and other procedures need to be carried out at the same time as home decoration. The wall-hung boiler is installed after the home decoration is completed, at least after the wall tiles are pasted.

    The installation part of the wall-hung boiler is closer to the heating system, pneumatic valve, water resources, switching power supply, and smoke and dust discharge inlet, and the better it is. According to the external conditions, select the required supporting facilities and accessories (such as indoor temperature controller, tap water pressure reducing valve, gas filter, tap water filter, etc.), and selectively install the spare parts mentioned above according to the external factors of the operation of the wall-hung boiler, such as for the tap water pressure and the normal area of the water body, you can do not need to install the pressure regulator and filter device);

    When the exhaust flue of the wall-hung furnace is installed, the ground must be high and the outside is low, that is, it must be placed obliquely at 3-5 degrees to prevent rain and snow weather or water condensate from flowing backwards into the wall-hung furnace, and the inlet and exhaust ports at the end of the exhaust flue must be thoroughly placed outdoors; The quality of raw materials for the installation of wall-hung boilers must meet the standards, and it is forbidden to use fake and shoddy pipe fittings, gate valves and pipes.

  2. Anonymous users2024-02-11

    First of all, the heating system in the user's home must be an independent system, secondly, there must be gas in the home**, and finally there must be a load-bearing solid wall in the home.

  3. Anonymous users2024-02-10

    That must be to dig 4 holes in the wall first, then install 4 hooks, and then go and install this stove.

  4. Anonymous users2024-02-09

    Is it too late to install the wall-hung boiler after the renovation? Let's take a look today.

    It's just in time.

    First of all, there are two kinds of heating ends for gas wall-hung boilers, the first is with floor heating, and the second is with radiators. Since underfloor heating requires laying water pipes in the ground before installing the floor, if your home has already been installed, then you can choose the second option to install a gas wall-hung boiler. If you choose a radiator as the warm end of Cairuliang, you only need to connect it to the wall to install pipes and radiators, which is not only convenient but also cost-saving.

    Expand your knowledge

    1. How to install a wall-hung boiler in a renovated house?

    1. Wall-hung boiler with floor heatingThis method is simple and fast, and it is suitable for the installation of wall-hung boilers. First of all, thin floor heating will not destroy the decoration, just connect the wall-hung stove and the water separator of the floor heating; Secondly, it is also more energy-saving and cost-effective to use.

    Wall-hung stove with radiator:The installation of radiators is indispensable for the installation of pipes, commonly known as "open pipes". For users who have been decorated, be sure to ask a professional installer to design before installation, and plan the route and layout of the exit pipe according to the house type, layout, and overall style.

    There are many families who only think of installing a gas wall-hung boiler after the decoration is completed, in fact, the installation of the gas wall-hung boiler itself is very convenient, but if you need to rematch the heat dissipation equipment is a troublesome thing, here take the radiator as an example, sort out the problems that will be encountered in the installation of radiators in the renovated house.

    2. Whether the decoration effect will be affected after installation

    Radiators are generally installed in places that are easy to convection, there are many types of radiators on the market at present, and there are many choices of materials and colors.

    3. Whether radiators can be installed in renovated residences

    It is completely possible to install radiators without affecting the heating effect. As for underfloor heating, it is not recommended to install a traditional one, because it requires the existing floor to be destroyed and re-piped, which is not practical for renovated houses, but if it is a thin quick-install slag sliding heating, it can also be considered.

    Fourth, whether the installation of the wall-hung boiler is troublesome

    Generally, rhinestone drilling will be used for the installation of pipes, which has certain requirements for construction technology, so when selecting the company that installs the wall-hung boiler, we must select an experienced construction unit for installation, so that not only the quality assurance of the material, but also the installation effect is beautiful and generous, which can provide users with the most reasonable installation effect and the most comfortable heating enjoyment.

  5. Anonymous users2024-02-08

    Before the transformation, we must be familiar with the specifications of the transformation and must find a regular gas company for the transformation, in addition, we must also understand the installation process and precautions of gas objects such as gas wall-hung boilers in the family.

    1. The installation process of household gas wall-hung boiler.

    1. Take out the installation instructions and schematic diagrams, and fix them in a good position with the expansion screws (kitchen, Tonghui balcony).

    2. For the installation of intake and exhaust pipes, the special exhaust pipe of this machine must be used. It is strictly forbidden to put other exhaust pipes into the installation, it is strictly forbidden to self-transform the flue. The surface of the intake pipe of the perforated part must be not less than 60mm away from the wall, and the engine intake and exhaust must be smooth.

    Attention should be paid to installing the exhaust pipe away from the ceiling.

    3. The interface at the bottom of the wall-hung boiler should be connected by a hose or a hard pipe, and the connection should be set up with four pipes below, two of which are heating pipes and two are hot water pipes.

    4. The connection method of the connected gas pipe and gas wall-hung boiler pipe is also different for different materials, multi-metal pipe, gas or gas special stainless steel hose, special aluminum-plastic composite pipe, gas pipe joint can be inserted, not just half of the insertion, and check whether the joint is leaking with soap and water after connection. 5. Debugging. After the installation of the wall-mounted gas boiler, the system was tested to ensure the normal operation of the system.

    2. Precautions for installation of household gas wall-hung boilers.

    1. Selection of installation location: Because of the combustion gas of most household gas wall-hung boilers, for the sake of safety, the installation needs to choose a ventilated place. In addition, the installation position of the wall is installed to shelter the gas boiler from wind and rain to avoid affecting its function and life from rain.

    2. Reservation of maintenance port: maintenance space should be reserved for the installation of hanging furnace. Specifically, in flue installation, the hanging furnace must be connected to a flue and discharged to the outdoor flue gas. The same flue can be used in different forms (closing or opening the boiler combustion chamber).

    3. Timing installation method: The wall-hung boiler is connected to the heating tool by the radiator and heating, it is recommended to decorate, slot, drill, and wire related links to the best concealment after the decoration to the installation of the gas wall-hung boiler. Although the installation and operation of household wall-mounted gas boilers is cumbersome, as an important part of the independent heating system of the home, the installation quality of local cracked gas wall-mounted boilers cannot be ignored.

    The Horsmann wall-hung boiler reminds the user that the quality of the installation must be checked when choosing and installing the company. There are only standard installation problems, from the details of the light source, household gas wall-hung boilers can bring us more ideal home heating in life.

  6. Anonymous users2024-02-07

    1. Unpacking inspection.

    After unpacking, check whether the accessories are complete, whether the manual, three bags of certificates, etc. are complete, and check the accessories with reference to the manual.

    2. Pipe laying and valve installation.

    Insert the special threaded pipe for the wall-hung boiler in the reserved position, and the reserved cavity should be slightly larger, so as not to re-hole and rework at that time. If the hole edge is frizzy, you can cover it with a lid after the wall-hung boiler is installed, and then fix it with glass glue. Before installation, close the hot water valve completely for heating at home to prevent "water overflow", and then install the hot water valve on the left side in your direction, and the cold water valve on the right.

    3. Install gas valves.

    When connecting the gas pipeline of the wall-hung boiler with the gas meter, a triangular valve needs to be installed to change the gas pipeline that was originally only used for the stove into a pipeline that can be used for both the stove and the wall-hung boiler. It is best to choose a ball valve, so that the opening and closing is more convenient.

    4. Install smoke exhaust pipes.

    The smoke exhaust outlets are all designed by the developer and the location is reserved, so the smoke exhaust pipe is best arranged before the wall-hung furnace is put on the wall, otherwise the position is not easy to adjust. It is best to use the lid between the exhaust pipe and the wall, and the original reserved plastic material is best not to use, because the temperature of the exhaust pipe will be very high when the wall-hung furnace is in use, and the plastic lid will be baked. It is necessary to pay attention to the inner height and outer low to prevent rainwater from backing up.

    5. Make holes before installing the wall-hung boiler.

    Measure and determine the position of the wall-hung boiler installation, then draw the position that needs to be punched on the wall with a pen, and punch the hole, and hang the wall-hung boiler first after drilling the hole with the expansion screw, and then delineate the position of the hole below, and then drill the hole again.

    6. Adjust the wall-hung boiler after installation.

    After the wall-hung furnace is put on the wall, it needs to make final adjustments. The yellow hose on the outside of the threaded pipe needs to be cut off to ensure that it looks good. After everything is installed, the test work will be done.

  7. Anonymous users2024-02-06

    At present, many homes have installed gas wall-hung boilers. When installing a wall-hung boiler, it is very important to choose a good gas wall-hung boiler installation location. If the installation position of the wall-hung boiler is improper, it will not only affect the use effect, but also easily lead to safety accidents.

    So, what is the best place to install a wall-hung boiler? Is there anything to pay attention to when installing a fireplace? Let's take a look at it this time.

    Kitchen, balcony: the best installation location for gas wall-hung stoves.

    Gas wall-hung furnace fireplace, with gas, water supply and power, convenient to exhaust to the outside, choose an unmanned room, shall not be installed in bedrooms, living rooms, bathrooms, basements, stairs and near safety exits. Usually, a kitchen-type flush room or an open-air balcony connecting the kitchen is the best choice for installing a gas fireplace.

    The kitchen installation is not frozen in winter, and the indoor operation is convenient for observation; There is no danger of gas leakage in the balcony installation, the indoor noise is small, the smoke ventilation is stable, and it does not occupy the precious area of the kitchen.

    1. Wires shall not be installed above the installation position of the gas wall-hung boiler. There must be no burners such as gas stoves underneath. The hot gas from the burner can cause the boiler to run poorly, and there is a risk of fire.

    2. Leave 50mm space on the left and right sides of the fireplace to prepare for the future repair and maintenance of the wall-hung furnace, and leave at least 200mm blank space under the wall-hung furnace for the inspection and replacement of the living heat exchanger.

    3.When installing a wall-hung boiler in the cabinet, attention should be paid to ventilation and clearance.

    4. The installation safety of the wall-hung boiler is generally the same as the height of the observation hole and the line of sight of the human eye.

    5. The installation of the machine should be kept upright, not tilted, and the installation position should be as close to the outer wall as possible to reduce the length of the flue.

    6. The part of the installation site of the gas wall-hung boiler should be made of non-combustible materials. Otherwise, isolate with a heat sink and set up the wall wall of the wall-hung boiler equipment that is sturdy and able to withstand the force required to hang the appliance.

Related questions
7 answers2024-07-14

1) In order to facilitate the inspection and maintenance of the product, keep more than 200 300mm space on the left and right of the product, and more than 600mm space on the front of the product. >>>More

6 answers2024-07-14

1. Choose energy-saving wall-hung boilers with appropriate power. >>>More

7 answers2024-07-14

1. Do not touch the wall-hung boiler in operation, and pay attention to anti-freezing. >>>More

12 answers2024-07-14

The choice of wall-hung boiler should be based on the size of the house, whether it is necessary to supply water and gas at the same time to choose the appropriate wall-hung boiler. A 140 square meter house can be used with 18kw-24kw, and Wenertai condensing wall-hung boiler 18kw can meet the heating needs of 140. If it is a 150 square meter apartment, its heating area is about 90 105 square meters, we calculate according to the heating area of 100 square meters, it is expected to need 15kw of heating power, considering the thermal efficiency of the wall-hung boiler is generally about 90, plus the usual domestic hot water demand, basically to choose a 24kw heating stove.

16 answers2024-07-14

It is possible to use underfloor heating for indoor heating, it is not needed in summer, it is possible in autumn, it is recommended to close the windows at night, open the furnace wall for heating, and open the windows during the day for ventilation and smell. It should be noted that the indoor temperature is around 30 degrees, which is not too high, because the temperature of the newly renovated house changes too much, and the material is prone to thermal expansion and cold contraction, resulting in cracking and deformation. >>>More