Can an iron radiator in the countryside be connected to a wall hung stove?

Answer: The original iron radiator in the countryside can be heated by natural gas wall-hung boiler for the following reasons:

The basic system structure of the whole home is to provide hot water by the boiler, and then the hot water is transported to each radiator through the pipeline, and the heat of the hot water is transferred to the radiator, and the radiator is in contact with the cold air in the room, so that the cold air becomes hot air and then rises, and the cold air continues to be heated by the radiator after sinking; At the same time, the cooled water inside the radiator continues to be heated by the boiler through the return pipe, and then continuously transported to the radiator for heat dissipation.

So, at present, the coal-burning boiler in your home is a heat source, its purpose is to heat hot water, but it uses coal to burn and then let the water heat up, and when it burns and releases heat, it will produce flue gas and discharge to the outside. If it is replaced with a natural gas wall-hung boiler, it is also a heat source, it is just a device that uses natural gas to obtain heat, and nothing else changes, so it is no problem at all.

The characteristics of natural gas wall-hung boiler: it is a kind of boiler that uses natural gas as the combustion medium, and its thermal efficiency can usually be as high as 93%, and there is also a condensing boiler, which can reach 109%, which is the most energy-saving heating equipment at present.

Gas wall-hung boiler, its appearance is relatively small, can be wall-mounted or floor-mounted, it is built-in by the circulating pump, under the general house, it is possible not to install an external water pump. The wall-hung boiler has four pipeline interfaces, which only need to be connected according to the requirements, and it is also very convenient to use, just press the switch, set the water supply temperature, and the wall-hung boiler will run automatically.

When using it, to ensure the operating pressure of the system, pay attention to the pressure of the pressure gauge and the operation of resetting. Because its operation is closely related to air quality, water quality and natural gas quality, because their impurities will enter the inside of the wall-hung boiler, resulting in the performance of some internal devices, so the use of gas boilers should be cleaned and maintained regularly.

To summarize the heating of the coal-burning boiler at the subject's home, you can replace it with a natural gas wall-hung boiler to heat the heating at home, and you only need to connect the four water pipes according to the instructions to use it. If your electricity price is relatively cheap, such as below the yuan kWh, I think you can also use an electric wall-hung boiler, which is also a very good product.

The iron radiator in the countryside can be connected to the wall-hung furnace, and the coal-fired boiler used in the household is generally an atmospheric boiler, and the internal water circulation is not closed, so the radiator displayed by you is not pressurized. The gas wall-hung boiler is just a water heating device, and an open device is added to the overall water circulation pipeline, such as an open water tank, to ensure that the water channel circulates under atmospheric pressure, which has no impact on the original heating system, but only replaces the heating method.

The iron radiator can be connected with the wall-hung boiler, as long as you deal with it properly, the iron radiator can be connected, and the operation method can be viewed some**, or ask some relevant personnel how to operate? You can also re-rinse the radiator before use, so that it will be better to use.

The wall-hung boiler can be connected to the radiator, and the radiator can be connected to the wall-hung boiler. Because the wall-hung boiler is a heat source device, the heating hot water supplied can be used for heat dissipation equipment such as radiators, floor heating, fan coil units, etc. It should be noted that different heat dissipation devices use different temperatures.

The old-fashioned cast iron radiator should be rinsed and a filter device should be installed on the return pipeline, otherwise impurities can easily enter the wall-hung furnace and cause blockage or damage. Modern radiators are generally not susceptible to corrosion and rust, but it is still recommended to install a filtration device.

The dark pipe is the boiler main receiver water separator, and then from the water separator to each group of radiators. The open pipe is the boiler main pipe out, and then the radiator is connected with a tee according to the specific situation.

It is recommended to choose the specifications of the water separator according to the number of radiators, and the standard of the water splitter: try to make the number of radiators of each channel equal, ensure the balanced water flow, and ensure the normal circulation of water!

If you are changing the central heating radiator to a wall-hung boiler, then the single-circuit one needs to be connected to an external circulating pump!

No. Gas wall-hung boiler radiator and central heating are heating systems with different working principles, therefore, the original gas wall-hung boiler radiator can not be directly connected to central heating.

When the ignition switch of the wall-hung boiler enters the working state, the fan starts first to form a negative pressure difference in the combustion chamber, the wind pressure switch sends the command to the water pump, and after the pump starts, the water flow switch sends the command to the high-pressure discharger, and the command is sent to the gas proportional valve, and the gas proportional valve starts to start.

Due to the existence of negative pressure in the combustion chamber, there is no aggregation and combustion of natural gas, so there will be no deflagration, and the calm ignition is ultra-silent, and the occurrence of dangerous accidents is avoided. Some customers are worried about gas safety because they do not understand the operation control principle of the gas proportional valve of the wall-hung boiler;

The gas proportional valve and the wind pressure switch and the flue gas induction switch are interlocked, and the combustion chamber has a certain negative pressure gas proportional valve to work, when the flue gas induction switch can not detect the exhaust gas discharge in 5 seconds, the gas proportional valve will be cut off to stop the gas supply, so as to ensure the safe use of gas.

The central heating system consists of three parts: heat source, heating pipe network, and heat user. Central heating heat sources include combined heat and power power plants, central boiler rooms, industrial and other waste heat, geothermal, nuclear energy, solar energy, heat pumps, etc., and can also be a multi-source combined heating system composed of several heat sources. The distribution of heat sources should be as centralized and reasonable as possible, and the heat source equipment should be selected with high parameters, large capacity and high efficiency as much as possible.

Regarding the question of how many groups of heating can be brought by the wall-hung boiler, it should be judged according to the model of the gas wall-hung boiler, such as 80 square meters and 120 square meters. A heating stove can only carry two sets of such radiators, and if you want to add radiators, you need to replace the high-power stove, then you have to pay for it.

A wall-hung boiler can carry several sets of radiatorsThis is not fixed, but also depends on the power and brand of the wall-hung boiler. Under normal circumstances, a 100-square-meter apartment can be equipped with a 24kw wall-hung boiler indoors, which can drive 60 radiators, which can make the room very warm. If it is a small apartment, you can choose an 18kw wall-hung boiler.

The three groups of heating should use a 20kw wall-hung boiler, because how many radiators can be carried by the wall-hung boiler is mainly related to the material of the radiator, the amount of heat dissipation, the installation method of the radiator and other factors. The 20kw wall-hung boiler can generally carry 2-3 groups of radiators, but if there are many radiator groups, the water pressure pressure cannot reach the normal circulation, but it will affect the heating effect.

Radiators made of copper-aluminum composite materials can be used.

1. The best thing about copper-aluminum composite material is that the heat conduction is particularly fast, and it is cheap, it can be said that it is a kind of radiator material with good quality and low price, in a sense, the use of this material is also very gas-saving, because it conducts heat quickly, so it does not need to be heated for a long time.

2. The copper-aluminum composite material also has the advantages of no rust and no corrosion, and the process of circulating water will not produce scale, which will not block the wall-hung furnace.

Then the service life of the wall-hung boiler can be extended a lot. In addition, if pure water can be poured into the circulation during use, there will be no limescale.

Hello, first of all, you should look at the material of the original gas wall-hung boiler radiator in your home, if it is an aluminum alloy radiator, his pressure may be used for central heating, and it cannot withstand the pressure of central heating. Second, if it is made of steel or other materials, there is no problem, and there is no need to suppress such procedures. Third, if the heating is not hot and leaking, it needs to be dredged, and your gas wall-hung boiler radiator can not adapt to the relevant dredging, which will lead to problems such as poor interface welding, and cause water leakage in the opening when the pressure increases.

FYI.

Summary. How to buy radiators 1, when we buy radiators, we can choose well-known brand products, such as St. Lawrence, Golden Flagship, Nanshan, Senrat, Sunflower, Florence and so on. When purchasing, we also need to understand what warranty after-sales service the merchant provides, how long the warranty period of the product is, and so on.

You can also learn about the word-of-mouth and after-sales situation of the merchant through online inquiries and other methods.

Aluminum-copper composite radiators can be used. This smart model heating has a thin wall, fast heat conduction, good heat dissipation, and its energy-saving effect is higher, which is conducive to saving expenses. The radiator is made of copper and aluminum, and the product has good stability, oxidation resistance, corrosion resistance, low requirements for water quality, and is not easy to produce scale.

How to buy radiators 1, when we buy radiators, we can choose famous brand products, such as St. Lawrence, Golden Flagship, Nanshan, Senrat, Sunflower, Florence and so on. When purchasing, we also need to understand what warranty after-sales service the merchant provides, how long the warranty period of the product is, and so on. You can also learn about the word-of-mouth and after-sales situation of the merchant through online inquiries and other methods.

Dapei. 2. The material of the radiator should be selected according to the local water quality and heating method. For central heating, steel radiators can be used, which have the advantages of good compressive performance and strong heat preservation.

3. When choosing a radiator, we should pay attention to the number and size of the radiator. The number and size of the radiator is usually calculated according to the indoor heating range, the insulation of the house, etc., and then we need to consider the heat loss when calculating the quantity.

Summary. Hello dear! We'll be happy to answer for you.

Can I install a wall-hung boiler for heating, can I connect a coal-fired radiator? Answer: Hello, yes, kiss.

Gas wall-hung boiler is the use of gas wall-hung boiler to realize the manufacture of heat medium. For example, we boil hot water in our house.

The hot water here is the heat medium needed for the heating of the wall-hung boiler. The heating form of the rear end of the wall-hung boiler can be arbitrarily selected. Therefore, the heating of the gas wall-hung boiler only shows that we use natural gas combustion to produce hot water, and does not determine the heating method behind the gas wall-hung boiler.

Wall-hung boiler heating: There are many different heating methods that can be connected. For example, our common wall-hung boiler can be used for heating, and there are different heating methods such as floor heating, radiators, radiators and floor heating.

Therefore, gas wall-hung boiler heating can be applied to almost any form of heating. : The ordinary radiator for household use is the cast iron radiator that we are familiar with.

It only has heat dissipation facilities in the heating system. This kind of heat dissipation facility is completely consistent with any kind of radiator we have at this stage, and there is no difference in its connection method and heat dissipation method, so it is also suitable for wall-hung boiler heating.

Can I install a wall-hung boiler for heating, can I connect a coal-fired radiator?

Hello dear! We'll be happy to answer for you. Can I install a wall-hung boiler for heating, can I connect a coal-fired radiator?

Answer: Hello, yes, kiss. ①：

The gas wall-hung boiler is the use of the gas wall blind wither-resistant hanging boiler to realize the manufacture of heat medium. For example, we boil hot water in our house. The hot water here is the heat medium needed for the heating of the wall-hung boiler.

The heating form of the rear end of the wall-hung boiler can be arbitrarily selected. Therefore, the heating of the gas wall-hung boiler only shows that we use natural gas combustion to produce hot water, and does not determine the heating method of Changdong heating behind the gas wall-hung boiler. ②：

Wall-hung boiler heating: There are many different heating methods that can be connected. For example, our common wall-hung boiler can be used for heating, and there are different heating methods such as floor heating, radiators, radiators and floor heating. Therefore, gas wall-hung boiler heating can be applied to almost any form of heating.

: The ordinary radiator for household use is the cast iron radiator that we are familiar with. It only has heat dissipation facilities in the heating system.

This kind of heat dissipation facility is completely consistent with any kind of radiator we have at this stage, and there is no difference in its connection method and heat dissipation method, so it is also suitable for wall-hung boiler heating.

It was installed before, and it burned a lot of carbon, but now it can be dismantled.

Yes, oh, kiss.