Should floor heating be installed? What are the issues that need to be considered when installing un

Good thermal stability: Due to the good thermal stability of the ground layer and the concrete layer, the indoor temperature changes slowly under the condition of intermittent heating, and it feels very natural. If the area is large enough, you can also consider the water machine dual supply system, as long as one external unit, turn on the air conditioning in summer and turn on the floor heating in winter.

In the past two years, the development momentum of the water machine is still very strong, and the comfort is much higher than that of the fluorine machine. If it is necessary to lay floor heating for the decoration of new houses in the north, it is cold in the north, and we have central heating in the cities in the north, and there is no need for the south, which is much more practical than air conditioning, saving money and warm.

<> the advantages of floor heating, the noise is low, there is no air dryness like air conditioners and hot air fans, and some heaters still have bright lights, which is also uncomfortable. The coverage area is large, the living room and bedroom can be paved, the whole room is warm, and the air conditioner can only be divided into rooms, or the air duct is large, which affects sleep. The advantage of installing radiators is that it is easy to install, walk the open pipe, no need to smash the ground, and it is easy to maintain when there is a water leak.

But the disadvantages are also obvious, it takes up space and is easy to blacken the wall. The advantage of laying underfloor heating pipes is that it does not take up space and is clean and hygienic.

Compared with air conditioning, it is still recommended to use floor heating to comfort the level, which is that air conditioning cannot be compared to the home with floor heating at the moment, wear sandals, sweatpants, and half-sleeves! Go out to get a courier, change into snow boots, put on a long down jacket, and the wind of the general air conditioner is blown from top to bottom, so the human body is easy to feel hot and cold feet. And this heat dissipation is not uniform, so the entire space cannot be heated evenly.

Underfloor heating is different, because underfloor heating is buried in the ground, so is heat.

First of all, laying floor heating can be very evenly heated, and there will be no uneven room temperature, second, floor heating is more comfortable than ordinary ** air conditioning, and will not be dry, third, from the energy saving point of view, floor heating is more energy-saving, and the feeling of maintaining the temperature is different, air heating, it will be drier, and hot air circulation, in fact, the feeling is not good, and floor heating, is from the bottom to the top to dissipate heat, more natural and comfortable, so the heating feeling of the two is also different, however, the air heating method.

At present, the unified heating method in the north of our country is floor heating. Therefore, if you are in a city in the north, you must install underfloor heating. Underfloor heating requires professional personnel to install. To choose a good one, the quality of the prevention of cracking.

It is believed that to install floor heating, the first thing to see if there is heating in this community, there is no heating, you need to use electricity for heating, and you need to use gas for water heating, which is a waste of electricity and gas. Therefore, if the community is heating, of course, it is necessary to choose to install floor heating, if not, it is best to use air conditioning or other heating equipment to save money.

Later maintenance is troublesome and expensive. The reasons why it is not recommended are as follows:

1. The overall construction process of the project is complex and the construction time of the project is relatively long.

2. The comfort in the heating process is relatively poor.

3. Later maintenance troubles.

4. Because the floor heating pipe has a certain thickness, plus the thickness of the cement and sand after leveling, this will occupy some indoor space in the room.

Nowadays, there are also a lot of heating methods and equipment, and many people who can't accept the shortcomings of floor heating have chosen other heating methods, such as installing radiators or air conditioners.

Now everyone's family living conditions are getting better and better, and after the floor heating is installed, the living conditions for children and the elderly will be even better. First of all, the installation of floor heating must consider whether the overall environment in the community supports us to install floor heating, and secondly, it is necessary to consider the cost.

Nowadays, most people are aware of floor heating, especially in areas with colder winters, and they are very familiar with floor heating. Because many families have already used floor heating, should they install floor heating? What are the advantages and disadvantages of installing floor heating?

When the weather is cold, underfloor heating will have a very good effect, and the temperature of the room will rise quickly and remain within the right temperature. When the temperature rises, you can also control the temperature yourself, which is very convenient to use! However, the cost of floor heating maintenance is high, and once damage occurs, a lot of maintenance costs will be generated!

So should you install underfloor heating? In fact, most people know about floor heating, but there may not be so many people who use it. But the use of floor heating is very good.

Since the main body of underfloor heating is installed under the ground, it is usually not visible and basically does not occupy indoor area. The heat energy is stable and the heat dissipation is even, the temperature can be automatically controlled, there is no noise in use, and there is no impact on daily life!

Do you want to install underfloor heating? The disadvantages of installing underfloor heating are also obvious, the main body of general underfloor heating is installed under the floor, or under the concrete. So once installed, it can't be moved again!

If there is damage, it can also be very troublesome to repair and the maintenance cost is very high! After using it for a period of time, you should find a professional to clean it up, otherwise it will affect the use and the heating effect!

Do you want to install underfloor heating? Underfloor heating has many advantages, such as excellent use and excellent overall heating effect. It is also relatively healthy to use, does not cause air pollution, does not affect indoor air circulation, and is environmentally friendly as a whole.

Secondly, the installation ** is not so high, you can choose domestic materials, which will save more money, and the use effect is also very good, and there is not much difference!

Whether to install floor heating or not, I believe you already have the answer! The use of floor heating works very well and allows people to live in a very comfortable environment, especially in the cold winter, and the effect is very obvious!

You can get it for free

Is it better to have underfloor heating or radiators? In fact, it is still necessary to make a decision based on the heating system of the reference community, the decoration design of the room and the planning of the construction of the house. Although the floor heating can be changed to radiators in the later stage, the heating effect cannot be guaranteed.

Why not find out about the different requirements of different heating methods before installing underfloor heating? If you want to install underfloor heating, what do you need to meet? Let's follow the golden flagship flag brother to find out.

1.Requirements for heat sources for underfloor heating.

Generally speaking, as long as it is a heat source that can provide enough hot water, such as wall-mounted gas furnaces, central heating, electric boilers, etc., it can be used as a heat source for floor heating, but the difference is only in the connection equipment.

At present, most of the residential areas belong to central heating. If the user wants to use central heating as the heat source of floor heating, it is recommended to install a set of temperature control center device at the entrance to protect the life of floor heating, play a role in cooling and energy saving (because to ensure the 50-year life of floor heating is under the condition that the water temperature does not exceed 60 degrees, and the central heating water temperature generally exceeds 60 degrees); If a wall-hung gas stove is used, there is no problem and it is generally more cost-effective than central heating.

2.The effect of underfloor heating on the floor.

The underfloor heating system takes up about 5-6 cm of space, which has a greater impact on houses with lower floor heights. However, if you consider the ground decoration, the impact may not be large. For example, sometimes in order to bury water pipes and heating pipes under the floor, it is also necessary to add 4-6 cm of height to the floor structure layer, but the only disadvantage is to use this floor space to install floor heating.

3.Choice of underfloor heating.

If you want to install wooden flooring, you need to make a keel, but installing a floor heating system does not allow any "small movements" on the floor, because the nails cannot see the plastic pipes underground. If you accidentally nail the plastic pipes into the underfloor heating system, there is a risk that the underfloor heating pipes will rupture and cause water leakage. Therefore, users who plan to lay wooden floors are not recommended to install underfloor heating.

Floor tiles are preferred, followed by laminate flooring.

Geothermal flooring must have the "four" good requirements of good thermal conductivity, good thermal stability, good enveloping performance and good deformation resistance. Floor heat is transferred to the surface through the floor, and there is bound to be heat loss, which can be minimized by an ideal floor. Therefore, in order to reduce the loss of heat energy and reduce the cost of heating operation and maintenance, the floor heating floor must be "thin and not thick".

The thickness of the plate should be controlled within 12 mm.