Can the radiators of old houses be changed to underfloor heating

Floor heating has its own applicable conditions, that is, low temperature and high pressure. This is very different from the heating characteristics of radiators, which belong to high temperature and low pressure. If these 4 points are not done well when decorating, the radiator can only swallow the bitter fruit of floor heating.

Let's follow the golden flagship flag brother to find out.

First, the floor height is guaranteed.

Floor heating and radiator installation is very different, take the decoration of the occupancy, floor heating will occupy 6cm height, if the home is to change to pave floor heating, then to combine the height of the floor, and pay attention to the height of the door and the ground. If you don't pay attention, the door after the modification is difficult to close tightly, and the room is cramped, which will only affect the comfort of the home.

Second, pressure measurement.

The installation of radiator retrofit floor heating is more complex and difficult than ordinary heating, so it is necessary to choose professional HVAC technicians and high-quality floor heating materials. The modified system should not omit pressure measurement, otherwise it is easy to have hidden dangers of water leakage.

Third, confirm the conditions.

Before changing the floor heating, you need to apply to the property company, and you must not secretly change the floor heating, otherwise it is not only easy to cause disorder in the community heating system, but also may face fines, etc., and the loss will be borne by yourself. Therefore, before heating, it is necessary to confirm the change conditions, whether it can be changed, and what procedures should be handled.

Fourth, pipe changes.

Underfloor heating is a low-temperature system, while radiators are high-temperature systems. After confirming the change, there is a certain emphasis on the selection of pipes for floor heating and the laying of the change, and there is no need to install a water mixing device.

In this case, the underfloor heating can be changed, and the floor heating coil can be laid and the ground can be reprocessed. It's just that it costs a lot of money.

The radiators of the old house can be replaced with floor heating, and the ground can be reinstalled.

The radiators of the old house can be changed to underfloor heating. You can just ask someone to get heating for you.

Floor heating is better than radiators, and the temperature is mild and uniform, so there will be no cold here and hot there. However, the ** of underfloor heating is more expensive than radiators, and the installation procedure is more troublesome. The radiator is easy to install, cheap, easy to turn on and off, and the local heating and cooling speed is faster.

However, it is easy to be affected by the environment, the temperature is unstable, and it is easy to be guided by the temperature difference [to decorate, find Hujia].

If you need it, you can pay attention to the decoration of Hujia. Shanghai Hujia Decoration Service Group Co., Ltd. (hereinafter referred to as Hujia Decoration Group) is a large-scale one-stop all-inclusive enterprise integrating sales, decoration, home furnishing and service. Hujia Decoration pays attention to the quality of decoration, establishes a German standard process system, and strives to bring the owners a high-quality living experience.

On the one hand, the decoration process and technical requirements run through every detail of Brother Ming, on the other hand, strengthen the construction progress and quality control, launch visual monitoring, arrange special personnel to spot checks on site, and if the quality is unqualified, it will be overturned and restarted, and truly create quality home decoration. It has always stood in the perspective of the owner to solve the design, construction, progress, quality and other issues, after about 8 years of hard work, in the Shanghai decoration market to gain a firm foothold, received more than 60,000 owners satisfied with the evaluation, currently has 23 stores, is a trustworthy decoration company.

When renovating old houses, the choice of underfloor heating or radiators has always been a controversial topic. These two heating methods have their own advantages and disadvantages, and you need to choose according to the actual situation.

Advantages of underfloor heating: frank serving.

1.High comfort: The floor heating uses a radiant heat source, the temperature is evenly distributed, and there will be no air flow and noise, which can provide a more comfortable indoor environment.

2.High aesthetics: Floor heating does not require the installation of radiators and pipes, which can be more free in interior design.

3.Space-saving: Floor heating does not require the installation of large radiators and pipes, saving indoor space.

4.Energy saving and environmental protection: Floor heating adopts low-temperature radiant heating method, which can reduce energy consumption and carbon dioxide emissions.

Advantages of radiators:

1.Simple installation: Lower installation and maintenance costs compared to underfloor heating.

2.Easy control: The room temperature can be quickly controlled by adjusting the valve, and the adjustment range is wider.

3.Easy maintenance: If there is a failure or when the parts need to be replaced, the maintenance cost is low.

On the whole, in the renovation of old houses, if you pay attention to comfort and aesthetics, and have a sufficient budget, you can choose underfloor heating; If you are more concerned about cost and ease of maintenance, you can choose radiators.

It should be noted that when choosing a heating method, factors such as the structure, area, and lighting of the house should also be considered. At the same time, it is also necessary to find a professional construction team for construction and commissioning during the installation process.

Finally, remind everyone that when using floor heating or radiators, attention should be paid to energy conservation and environmental protection, and regular cleaning and maintenance should be carried out to ensure its normal operation and life.

When choosing underfloor heating or radiators when renovating old houses, you should choose according to your actual situation and needs.

Underfloor heating is to heat the room through the heat dissipation pipes laid under the floor, which can make the indoor temperature more even, comfortable, and will not occupy wall space, more beautiful. Radiators, on the other hand, rely on hot water or steam to directly heat the air to raise the indoor temperature.

In terms of heating effect, floor heating and radiators can be used for heating, but floor heating is relatively more energy-saving. At the same time, if you want the unity of the old and new architectural styles, and want to retain the original interior space layout and existing decoration style while ensuring comfort, then underfloor heating is often a better choice.

However, the installation of underfloor heating in the renovation of old houses requires large-scale demolition of the original ground and laying of heat dissipation pipes, so it is relatively complex, while the installation of radiators is relatively simple. At the same time, the floor heating decoration cycle will also be relatively long, and the time cost needs to be fully considered.

In short, the choice of floor heating or radiator needs to be based on the actual situation and consider your own needs, budget and decoration style and other factors to make a decision.

This floor heating and radiator have bad aspects, there are good aspects, such as floor heating, he has been particularly implemented in recent years, and the temperature of his heating is particularly low, then the temperature in the house is also particularly comfortable, for example, the radiator we use, he should be above 60 degrees to make the temperature in the house reach a comfortable temperature, and the radiator and floor heating, its heating temperature is more than 40 degrees, if the temperature is too high, then it is not good for its pipes to be buried. Because it is generally plastic and plastic, then it is too hot and the format is easy to break, and the other one will definitely reduce his lifespan, but now it is said that floor heating can be used for 50 years, and its good aspects look good, save space, and adjust the temperature bending shirt is particularly low, and it is easy to adjust, which is a good aspect. But the bad side is to say, if there is a pipe leaking Qingbu, then at this time you personally can not see, and know that it is the leak, you must destroy your floor tiles, and then you can repair the pipe inside, the radiator looks not good-looking, taking up space, but when a certain point leaks, you can see it, it is also good to repair, you can say that you can repair it yourself, but the bad aspect is that he takes up too much space, not beautiful, Sometimes the heating is likely to be dark, I think it's in the process of heating, it must be damp, and then there will be dust in the house, so you can choose according to these two aspects.

Floor heating renovation radiators can be changed, under normal circumstances, floor heating to radiators are easy to change, and professional floor heating personnel are required to change them, and they cannot be modified by themselves.

Floor heating belongs to low-temperature heating, the water temperature of floor heating is generally around 40-60 degrees, and the water temperature of the radiator should be at least 50 degrees or more, usually above 60 degrees. The heat dissipation area of floor heating is large and the heating is uniform, so the temperature is lower to ensure that the indoor temperature is relatively high. Radiators, on the other hand, belong to district heating, and one or two sets of radiators are set up in each room.

Heat is conducted through the air, so high temperature and high heat dissipation are required to ensure the indoor temperature. Many toilets with floor heating use radiators to avoid floor heating pipe leakage repair, or toilet leakage repair and damage to the pipe. Connect the radiator pipes in the main pipe of the underfloor heating separator.

Generally, it is done during the decoration and the pipeline transformation is arranged.

First, it is necessary to know whether the heating in the user's home is in use, whether it is self-heating or central heating. The reason for this distinction is to figure out the water supply temperature, the water supply temperature of radiators is generally around 80, while floor heating can only use water below 60. If you use a wall-hung boiler, turn down the temperature of the heating water.

Second, to see whether the ground in the user's home is allowed to be destroyed, after laying floor heating, the indoor ground will be raised by about 10 cm, which will hinder the opening and closing of the anti-theft door and indoor door. There are two ways to deal with it:

1. It will be necessary to destroy the ground for excavation.

2. Replace all the doors and re-customize.

Third, after the construction of floor heating, the ground should be redone, such as paving the floor tiles and wooden floors. If you can determine the above two points, the rest of the work is simple. To sum up, the cost of changing radiators to floor heating will be relatively high, especially for old houses, which involves a lot, and the construction cost of renovation is even higher than the cost of floor heating construction of new houses under the same conditions.

The premise of changing the old house to floor heating is to find a professional and standardized HVAC company, the design specification, the configuration is reasonable, the underground pipeline part is injected with pressure test after the installation is completed, the installation of floor heating in the old house should pay attention to the design of floor heating, because the general old house is designed according to the structure of the single-layer glass house and the thickness of the wall are designed according to the previous building standards, the sealing effect is not too good, so the reasonable design must be fully taken into account when building floor heating, The spacing of the steel pipes.

1. For central heating, first of all, it is necessary to find the main pipeline where the heating is located, cut off and remove the original heating, and then connect the main pipe of the floor heating, introduce the new main pipeline into the kitchen or bathroom, and then connect the necessary equipment, and it is best to lay the floor heating coil in accordance with the conventional floor heating installation process.

If it is independent heating, it is necessary to directly cut off the main pipe connecting the wall-hung boiler and the radiator, and finally connect the inlet and return water of the floor heating to the heating inlet and return water of the wall-hung boiler, so that there is no problem.

2. If you have tandem heating, it is not recommended to install floor heating, because it may affect the heating of your downstairs neighbors. If it's a parallel heater, you don't need to worry too much. Another point is that underfloor heating has great requirements for floor height, and it is best to consider your acceptance of floor height when renovating.

If it is self-heating, it is more convenient to change the floor heating, if it is central heating, it is a little troublesome, because the floor heating is to burn gas, and the gas company charges for the gas provided by the central heating community and the self-heating community are different standards.

The old house heating was changed to floor heating 1It depends on whether central heating is centralized, if central heating needs to add muddy water devices, reduce the temperature of floor heating water supply; 2,。Whether the ground is allowed to be destroyed, laying underfloor heating will be raised.

If destruction is allowed, the ground can be dug down. Kosmann's slim floor heating module has a finished surface of 25 to 45 mm, which does not occupy a floor height. 3.

The floor heating coil should not be too long to avoid excessive resistance.

In terms of floor heating, the installation of floor heating, the temperature in the pipe is generally maintained at about 40 degrees, and the warmth of floor heating is more durable and has a long service life. Moreover, the floor heating is installed underground, although it will affect the height of the floor, but the usable area is increased, the floor heating will be more comfortable and hygienic, there is no sanitary dead end, and it is easier to clean. However, when installing floor heating, the main ground material is needed, and it is recommended to choose a stone or composite floor with good heat dissipation and material properties that are not sensitive to temperature changes, and the solid wood floor is not suitable for the ground radiant heating system.

And the main thing is that the system pipelines of floor heating are all concealed under the ground, and there is no possibility of disassembly and replacement, so if the ground is used for secondary decoration, the system is only dismantled as a whole.

The radiator is fast, the good radiator starts to emit heat in about 10 minutes, and reaches the preset temperature in half an hour, and there is no requirement for the ground material and it is ready to use, no need to wait, saving time: whether it is a PB pipe or an aluminum-plastic composite pipe can be used as a thermal insulation conduit, which does not affect the ground at home. Choosing a radiator that is more suitable for furniture has a 1+1>2 aesthetic effect.

The biggest advantage of the private radiator is that it can be installed open, not affected by the floor, and can also bake clothes, which is very suitable for young people with a fast-paced life. Especially for families in the north, it is a very devastating thing to wash clothes in the winter and not dry them all the time. But radiators can solve this big problem.