Is it good to make wooden floors on top of floor heating? Will it warp after a long time?

Of course it's not good, it will definitely jump, the planks will expand and shrink in heat, and if there is floor heating, it may cause cracks.

It's not very good, it's definitely deformed after using it for a long time, and it's definitely going to warp, which is normal.

Generally, do not make wooden floors on top of floor heating, because after a long time, the wooden floors will be smoked and blackened, and it is difficult to clean. Even long-term use will deform and crack.

Floor heating can be laid wooden floor, in foreign countries, floor heating has been prevalent for many years, technical support is also very mature, generally there will be no problem of bulging anything.

The problem you are talking about is generally a problem with the selection of wood floors. To choose a composite wood floor with a special floor heating configuration, you can't use solid wood flooring, because natural wood boards are affected by thermal expansion and contraction, and are easy to deform.

In foreign countries, PVC wood flooring is used in some places (home decoration, not shopping malls). It also works very well.

The seams bulge. a. Drum on the surface of the floor: During the installation process, it is inevitable that sometimes the glue does not completely fill the joints. If the mop drips while mopping, it will cause water to accumulate on the surface of the floor and enter through the joints with less sizing, and the floor substrate will absorb water, resulting in local expansion and blistering.

In this case, the joints on the surface of the floor are partially bulging;

b. Water bulging under the floor: the surface phenomenon is that the shape of the seam bulging is more uniform, the place near the water source is heavier and stricter, and the far place is getting flatter. The places where such problems arise are:

Close to restrooms, kitchens, heating pipes, air conditioning condensate outlets, windows, etc. If the flooding time is long and the surface phenomenon is no longer obvious, you can open the floor to check whether there is a watermark to determine the cause;

c. Bulging of short joints on the floor: It is manifested as the bulging of each short joint of the long floor, which is usually caused by too heavy moisture on the ground. The higher the bulge, the greater the moisture on the ground.

Repair program: replacement of the floor.

Whether it is an east-west or north-south floor, it is necessary to let the workers leave 1 cm of space between the floor and the baseboard, so as to prevent the floor from deforming and drumming, and try to 1m a lock, in short, the floor is all seamless and may be easy to drum, so it is best to consult with the master when paving

Summary. 1. Wood floors generally use warm colors, and wood floors with a certain degree of softness in vision and touch have a higher affinity and are easier to create a sense of warmth, which is still good.

2. When you choose the floor heating floor, you should try to choose the best, because the inferior floor is easy to produce toxic substances when it is baked by hot gas, so you must pay attention to it.

3. If there is floor heating at home, you must pay attention to the material laid above, in fact, although there are pros and cons to laying tiles and wooden floors, it is still recommended that you lay wooden floors here, especially now that there are special floor heating floors, it is still more practical, and you can buy it with confidence.

Floor heating causes the floor to warp, and it is good to lay that kind of floor later.

Hello, I'm glad to be able to answer your confessions. As far as I know, it's the wooden floor. Pay attention to the choice of floor heating floor, choose the floor of the positive material of the environmental protection car, this will be much better.

1. Wood floors generally use warm colors, and wood floors with a certain degree of softness in vision and touch have a higher affinity than the spine cherry trees, which is easier to create a sense of warmth, which is still good. 2. When you choose the floor heating floor, you should try to choose the best, because the inferior floor is easy to produce toxic substances when it is baked by hot gas, so you must pay attention to it. 3. If there is floor heating at home, you must pay attention to the cherry acres laid above, in fact, although there are pros and cons to laying porcelain Songsheng bricks and wooden floors, it is still recommended that you lay wooden floors here, especially now that there are special floor heating floors, it is still more practical, and you can buy it with confidence.

How about Del flooring?

My family has bought a wooden spar vertical floor, and I personally think that I should choose some *** reinforced composite flooring. Because the strong spring hunger laminate flooring is made of some wood synthetic, it is very good in terms of thermal stability, or good

It is my honor to help you, and I hope that I will help you with a late lease answer.

Personally, I think the rubber brand of beam limb splitting is very good, and the new structure floor of Del is non-formaldehyde-free and aldehyde-deficient, which is one of the domestic parquet floors, which is really good, but the price is a little higher

This is because the gap left by the floor is not wide enough, and when the floor is heated, the heat cannot be dissipated, and it will naturally warp. Therefore, if you lay the floor, you must pay attention to this detail.

The main reason is that the temperature of this floor heating is too high, which causes the glue under the floor tiles to be warped, and the floor is warped.

The reason why the wooden floor is warped is that it is too dry. We know that in many cases, the air humidity is too low, causing the air in the house to dry out, and it is recommended to wait for the heating to end and then have a professional worker repair it.

This is because the temperature of the floor heating is relatively high, and the quality of the floor is not very good, so this situation will be triggered.

This is because of the quality of the floors, coupled with the relatively high temperature of the floor heating, so these floors warp when heated.

It's because the floor is glued. The temperature is too high for the glue to melt, so the floor will naturally warp.

In this case, do not deal with it without authorization, contact the relevant maintenance personnel, and let them deal with the matter.

Solid wood floor heating floor is just a sales gimmick for northern families, whether it is composite flooring or solid wood flooring, it is not very good for heat conduction, the advantages can only be said that the wear resistance and daily maintenance of solid wood flooring is better than that of composite flooring, how much better can only depend on the actual effect, the floor is still not suitable for China's living conditions.

It's not bad, the thermal conductivity of solid wood is not as good as that of tiles, but the heat preservation is good, and the heating effect of solid wood floor heating is very good.

Look at the quality of solid wood, if the quality is not good, after a period of time, some places will be warped and replaced again, which will be troublesome.

The solid wood floor heating floor is very good, and it is also the solid wood floor heating floor that I bought, which is the oak solid wood floor heating floor of David Floor, which has been used for more than 2 years, and I am really satisfied with their products.

Floor heating should not be made of solid wood floors, or floors that require a keel. Moisture baking is not very dry in the production of solid wood flooring, and the floor heating is baked for a long time, which may lead to the drying of moisture It is recommended to purchase wood floors suitable for floor heating.

The use of underfloor heating in the home will have an impact on the wooden floor. The ground radiant heating system is mainly based on the ground as the heat dissipation surface, the whole room for low-temperature floor radiant heating, the floor heating room floor material selection from the thermal conductivity considerations, natural stone is the best, followed by ceramic tiles, then composite flooring, and finally wood flooring. So in the same case, wood flooring has the most thermal insulation and relatively poor heating effect.

Sometimes, due to the lack of dryness, the moisture in the solid wood floor is too large, which may cause the floor to warp and bulge when applied to the floor heating room. Due to the large amount of glue contained in the composite floor, it is easy to activate harmful substances such as formaldehyde and benzene when heated, which is not good for people's health.

Now there is a special floor heating floor, the heating effect is very good, and the beautiful high-end atmosphere is high-grade, and it is very comfortable to step on. Later, I will send you the top ten brands of floor sales in 2018 for your reference.

It depends. First of all, the heating situation, self-heating, the kind of gas stove that burns the floor, if there are children at home, it is recommended to use the floor, and the central heating can be used for floor tiles because of the high temperature in winter; Secondly, the worst is not the difference between floor tiles, but the difference between different brands of similar products. For example, in addition to solid wood flooring, composite flooring, floor tiles are generally recommended to use Guangdong brands, and Shandong brands are not recommended.

Let's use home improvement pvc flooring. The effect of solid wood. Tiles are as strong as they are.

And it is resistant to high temperatures. At present, PVC flooring is the most suitable for underfloor heating. Other solid wood composites.

Intensive compounding. It will crack after three years. Harmful substances can also be volatilized when the temperature of underfloor heating is high.

PVC flooring will not.

First of all, it is a multi-layer solid wood It is cut into multiple layers of wood The texture of the wood is staggered and stacked horizontally and vertically The internal stresses cancel each other out, so it will not deform and crack And the floor itself has a lot of heat conduction grooves throughout the body The heat can flow evenly The material is soft I haven't seen it!! The ground is tighter, so that it will not be deformed and cracked, and there is a breathable cushion With this, there is no need to lay that thick layer of foam It is said to be a patented product Now no one seems to buy pure solid wood Because pure solid wood is easy to crack Bulge and pull out joints, especially now that there are many floor heating, the wood itself is not easy to conduct heat after the floor is heated, so it will affect the heat dissipation and cannot achieve the effect of floor heating.

Geothermal heat has been used for a long time, and it has *** on the human body, so it is recommended to use floor tiles, which can be carpeted on the floor tiles.

You can install flooring in the bedroom and floor tiles in the living room! Nowadays, it is popular to use wooden floors to make raised tatami mats, and the effect is also good! Kids can play on it, and tiles can be laid elsewhere!

Paving tiles should pay attention to the smooth surface of the floor tiles to be covered with paper to protect it, and wait until the decoration is all over to pick up, otherwise the smooth surface is easy to have small scratches, which is obvious under the light! It's very distressing to watch, my home is!

Wooden flooring can improve the humidity of the house, to meet the standard suitable for the human body, the floor tiles are easy to clean, depending on the quality of the individual behind the individual, if you work long hours every day, the labor degree is large, I recommend the use of ceramic tiles, if the pursuit of comfort and quality of life. It's better to have wooden floors.

My home is also going to be renovated, I checked a lot on the Internet, and finally decided to use flooring, but you must use laminate flooring, solid wood can not be used in the geothermal system, you think about it.

I have to tell you about this from practical experience

First of all, during the installation of the floor, there must be a gap in the middle, so that it will not be deformed for a long time Of course, there will always be a slight deformation.

Secondly, floor tiles are indeed more durable than floors.

But the last thing we need to consider is: Is your home geothermal?

If it is geothermal, it is recommended to install floor tiles, which are not only durable but also can effectively protect the floor tiles. It is also easy to clean.

But if not, it is recommended to install flooring, because relatively speaking, the floor is not as cool as the floor tiles Especially if there are children at home, it is best to have flooring, the floor is not cold, and the children will be comfortable