The wardrobe will become old after a long time, how to renovate it?

Method 1: Sticker refurbishment method

1. Remove the items stored in the wardrobe, clean them, and if there are protrusions on the surface of the wardrobe, you can use sandpaper to polish them; If there are cracks, you can find a filling such as cotton wool to fill it. (Protrusions or cracks are mainly caused by the use of solid wood wardrobes for too long, and are caused by the combined action of temperature, humidity and other factors).

2. Remove the decorations and handles of the wardrobe, store the parts properly, and purchase them if they are found to be damaged or missing. If you can't buy the same accessories, it is recommended to replace them all, after all, it is very troublesome to renovate once, and you can do it best.

3. Buy the required stickers, measure the size of the wardrobe, pay attention to keep the texture or pattern of the sticker consistent, and remember that the actual size required is larger than the measured size, which is to avoid not completely covering the wardrobe.

4. After the sticker is cut, tear off the tape on the back and paste it along the outside of the wardrobe, it is recommended to paste it from top to bottom, fix one end first, after fixing, scrape it flat with a scraper, and then gradually tear off the sticker, pay attention not to stick it crookedly.

5. After pasting, press the paper surface by hand, if there is a drum place, you can use a needle to release the air inside, so that the wallpaper is flat and better fit with the counter.

6. Finally, install the removed handle accessories.

Note: The wardrobe must be cleaned, otherwise the stickers will easily fall off.

Method 2: Paint and renovate

1. Material preparation. Determine whether the wardrobe is made of logs, if so, you need to prepare some sandpaper of different thicknesses; If it is not the original material, you need to purchase some "putty" to level the recessed part. Remember that when buying paint, you need to explain the purpose of the paint to the store, some paints are not suitable for painting furniture.

2. Grinding. Wrap sandpaper in a rag to sand the surface of the wardrobe to remove excess impurities from the surface of the wardrobe and to enhance the adhesion of the wardrobe and paint. It is best to use horizontal and then vertical, from top to bottom, inside to outside, what to use coarse sandpaper first, and then use fine sandpaper.

3. Brush the paint. Take out the paint and dip it in the paint bucket with a brush, however, not too much at a time, pay attention to the treatment of corners and hidden corners from top to bottom, first inside and then outside.

4. Allow to dry. Place it in a cool and ventilated condition, let it dry slowly, and finally put on the handles and other decorative items.

Remove the items stored in the wardrobe, wash them, and sandpaper them if there are protrusions on the surface of the wardrobe; If there are cracks, find fillers such as cotton wool to fill.

You can buy some more environmentally friendly paint and repaint your wardrobe. Once the wardrobe is painted, the whole thing will look like new.

If the old wardrobe needs to be recolored, you can only choose the muddy water paint in the closed paint can cover the original color for color renovation, and if the texture of your wardrobe plate itself is what you like, you want to keep it, and it is in line with the style of your home, it is recommended to use open paint for the renovation of the old wardrobe.

Dispose of clothes that have been sitting in the sun for a long time, and then clean the place where the clothes are kept.

The cabinets at home are too old to be renovated and should be refurbished with paint.

1.In the case of wooden or metal cabinets, refreshing the paint is a common method. The cabinet surface is cleaned first, and then painted directly after drying.

In this way, it is too thick and brand new. However, when painting, we should pay attention to the nature of the paint, which must be the same as the original to avoid wrinkling of the cabinet. In the case of metal cabinets, the rust on the surface needs to be polished with matte paper.

In the case of wooden or metal cabinets, refreshing the paint is a common method. Clean the cabinet surface first, then paint it directly. In this way, it will be as good as new after refurbishment.

2.Furniture with curved and carved parts requires special care when renovating. Especially some of the more precious mahogany cabinets, which can damage them if you don't pay attention to the renovation process.

The DIY method is a common method because it does not alter the original structure of the furniture, so in general, as long as you have enough imagination and polishing ability, you can do it perfectly, not a professional.

3.Solid wood cabinets are common in life and can be said to be one of the most widely used cabinet materials on the market. The solid wood cabinet is made of solid wood as a whole, and most of it is spliced during processing, which avoids the use of adhesives in a large area and is more environmentally friendly and healthy.

In addition, compared with other materials, solid wood cabinets can have good load-bearing capacity and longer service life, but solid wood cabinets have a higher **. Furniture with curved and carved parts requires special care when renovating. In particular, some of the more precious mahogany furniture can be damaged if you don't pay attention to the renovation process.

4.After painting the wooden and metal cabinets, they look brand new. However, there are also some areas to pay attention to in paint.

The purchased paint should have the same properties as the ** paint to prevent the cabinet from wrinkling. The metal cabinet should first wipe off the rust on the surface with sandpaper to make the brush work well. The metal cabinet should first wipe off the rust on the surface with sandpaper to make the brush work well.

I think of course you can, first clean and polish the surface, and then spray it with new paint.

The cabinets at home have been in use for a long time and need to be renovated. So how do you renovate old cabinets? PChouse will take you to find out.

Primary color renovation: The surface of the old wardrobe has been brushed with blending paint, but the color is not good-looking, and the primary color needs to be renovated. According to the age of the wardrobe to decide whether it needs to be doxxed, if not, as long as the oily stain is wiped with soapy water or gasoline, otherwise, it needs to be thoroughly sanded before repainting the original color.

Color renovation: The color luster on the outside of the old wardrobe has become old and not bright after the tempering of time, so we can deepen the color directly on the basis of the original paint color, and then apply varnish to protect it.

Wallpaper renovation: Compared with painting renovation, this method is much simpler. Directly go online to find your favorite PVC stickers, stick them on the surface of your old wardrobe, and use a hair dryer to blow them off when you don't want them.

If you choose to paste wallpaper, you have to consider glue, offset printing, discoloration and other issues.

1. Brush the paint.

The easiest way to refresh the paint for an old cabinet renovation. If it is a wooden or metal cabinet, it will look like new after being painted. However, there are also points to pay attention to when brushing paint, and the paint purchased should be of the same nature as the original paint to prevent the cabinet from wrinkling.

The metal cabinet should first use sandpaper to rub off the rust on the surface, so that the effect of brushing out will be good.

2. Stickers. Stickers are as convenient and simple as painting, and there are many furniture refurbishment stickers on the market now, which can be glued to the cabinet and can be cleaned with water. And if you want to change the color of the sticker, you can tear the sticker off directly with the hot air on the hair dryer.

However, the formaldehyde content of this sticker is relatively high, and the pollution is more serious.

Refurbishment of wall-embedded wardrobes should be carried out depending on the wear and tear. The following is an introduction to several common wear and tear situations and solutions for embedded wall wardrobes. First:

The original fireproof board is warped. In this case, the original fireproof board can be removed and the new fireproof board can be re-pasted. Second:

The original Polaroid plate is warped. In this case, the process of shoveling first and then re-pasting is also adopted. Third:

The original plywood surface became old. Revarnish can be repainted, which is cheap but not effective; Or brush white hand sweep paint, the effect is very good, but **slightly expensive. Fourth:

The original veneer is getting old. In this case, it can generally only be re-sanded and painted with the same type of paint as before, but the effect is not very obvious.

Wooden furniture can easily lose its luster if it is not maintained regularly. Dusting furniture is the most basic care work. Use a soft cloth dipped in some spray (Bilizo) along the grain of the wood to dust the furniture, but do not wipe it with a dry cloth to avoid scratching the flowers.

Daily protection is also very important, as much as possible with a mat under the hot plate to prevent the soup stock from spilling, staining or damaging the tabletop. Try to avoid exposing furniture surfaces to corrosive liquids, alcohol, nail polish, and lacquer removers. When solid wood furniture is used in a drier environment, artificial humidification measures are more necessary.

For example, wipe the furniture regularly with a soft cloth dipped in water. And every six months to a year, the furniture should be waxed regularly.

It is best to wax furniture with paste-like wax, and the old wax should be wiped off with mild, non-alkaline soapy water before waxing. When furniture is scratched or needs to be repaired, the easiest remedy is to use a cotton ball or paintbrush to apply shoe polish of similar color to the surface of the furniture; If you remove the water stains on the surface of the furniture, you should spread clean absorbent paper on the water traces, press it on it with a heating iron, and you can also use salad oil and toothpaste to apply, and then wipe it dry and wax; To remove white marks, the best way is to apply a cloth dipped in soot mixed with lemon juice or salad oil, dry and wax.