-
1. Be sure to choose a high-quality queen bee.
The queen bee is responsible for the reproduction of the entire bee family, so if you want the bees to reproduce quickly, you must choose a high-quality queen bee.
We can breed the queen bee by selecting a strong and excellent bee colony in our apiary as the queen bee breeding mother group, and at the same time selecting an excellent bee colony as the parent group; The second is to ensure the quality of the queen bee in the colony by purchasing high-quality queen bees from agricultural institutions or professional breeding institutions; The third is to pay attention to the queen bee is robust and has a strong ability to lay eggs. If we do these things well, our queen bee problem can be solved.
2. The powder must be sufficient.
Many people in beekeeping, if they find honey after always take it out, but this is not good for bee reproduction, many worker bees choose to abandon the larvae because there is no honey powder, and some queen bees will reduce the number of reproduction or reproduction due to the lack of honey powder.
Therefore, when people take honey, they must observe the sufficient amount of honey powder, and must leave some honey powder in the nest, so as to effectively improve the speed of bee reproduction, and secondly, to observe whether some pollen is sufficient.
3. Be sure to do a good job of management in summer.
Bees are not easy to survive in winter and summer, many people pay attention to bees wintering but pay little attention to bees in the summer to prepare for the heat, the average person will choose to keep bees in the shade, and if you find that the natural enemies of bees must be removed, if necessary, manual removal.
In general, bee reproduction needs three roles of climate and breeding methods, and at the same time can promote the reproduction of bees, the climate should not be too high, not too low environment, it is best to choose a place with flowers in the wild, because only then only the pollen is sufficient, the reproduction of bees will be guaranteed to a certain extent.
Allowing bees to eat fresh and abundant pollen can increase the reproduction rate of bees, which is why many people go to the wild to pick flowers and take them to a beekeeping place for bees to use.
-
The best thing to do is to put the honey and the bees together, and then they will form a mating phenomenon, in which case they can reproduce quickly.
-
1.Cold bees, hot spring breeding is actually what we often say about packaging for bee colonies to keep warm, helping bee colonies to replicate normally at low temperatures, and reducing the burden of worker bees to maintain the temperature of the hive. 2.
The basic operation method is similar to the hot spring breeding method, which is to adjust the bee colony to keep the bees dense, and then carry out appropriate feeding to let the bee colony develop smoothly. The difference is that Leng Chun Fan will not pack the bee colony to keep warm, and will not artificially raise the temperature of the hive, but only rely on dense bees to protect the spleen.
-
During the spring season, two beehives should be placed side by side. In the evening when there is no wind, each group of bees is fed 275 milliliters of sugar water or honey mixed with water in the same proportion as sugar and water, and they are supplemented from the bottom of the tank every night. Feeding should be diligent, 1 time per night, can not be interrupted, and the amount of feeding should not be too large.
-
It should be kept warm in moderation, because the temperature is high and the bees are active, so the reproduction will naturally be faster.
-
The weather in early spring is changeable, the temperature is low, and the temperature difference between day and night is large, so strengthening heat preservation is an important measure for rapid spring multiplication. The colony should be kept in a dry, sunny and sheltered place. Pay attention to adjusting the nest door in the morning and evening, strengthen artificial insulation, and change the insulation in the box in time on sunny days to help increase the nest temperature.
For weak bee colonies, double king swarms can be organized nearby to facilitate heat preservation. Extract the empty spleen in time, narrow the bee path, so that there are more bees than the spleen, so that the bees are dense. The partition is covered with straw, the nest frame is covered with cloth and newspaper, the secondary cover is covered with straw curtains, and the front and rear screens are mated with newspapers, all of which are conducive to the insulation of the bee colony.
The bee colony is well insulated, the queen bee lays eggs early, the egg circle is large, and the reproduction is fast.
The middle bee likes the new spleen, and often bites the old spleen in early spring, so that the wax chips and dirt are all over the bottom of the box, so the new spleen that has been bred 1 2 times should be replaced. If the new spleen is missing, when there is some source of honey from the outside, cut off the underside of the old spleen2 3, combined with reward feeding, and let the worker bees rebuild it for the queen bee to lay eggs.
In short, if the colony is kept strong in early spring, the feed is sufficient, and the heat is kept warm, the bee colony can reproduce quickly. If the conditions are not met, we should try to create such conditions to achieve rapid reproduction.
-
Bees will reproduce in spring at the right time, but the specific time is still uncertain, and their spring reproduction will be affected by a variety of factors, such as local climate and geographical environment, which are all factors that will affect the spring reproduction of bees
The time of spring reproduction of bees varies according to different temperatures, and when the outside temperature is still low or the temperature difference between day and night is large, it is not possible to add spleen, because the thermal insulation performance of the bee colony will be reduced, and then the worker bees may freeze or freeze to death of the spleen;
The time of bee spring reproduction varies due to different nectar sources, the reason is that the nectar source is the basis for the survival and reproduction of bees, although the early stage of spring reproduction is basically based on artificial feeding to provide food for the bee colony, but the middle and late spring reproduction of the outside world has a certain amount of nectar source, and blindly adding spleen without nectar source is also extremely unfavorable to spring reproduction.
-
North China generally chooses after the beginning of spring, the northeast is mid-March, the middle and lower reaches of the Yangtze River are before and after the big cold, the south of the Yangtze River is generally above zero, the big cold can be released before, choose a sunny weather of more than ten degrees, let the bees come out to excrete, and then treat the mites with water agent and then release the king is better, I hope you adopt.
-
Bees will be in the spring breeding quarrel at the right time, but the specific time is still uncertain, and their spring reproduction will be affected by a variety of factors, such as the local climate temperature and geographical environment, which are all factors that will affect the spring reproduction of bees
The time of spring reproduction of bees varies according to different temperatures, and when the outside temperature is still low or the temperature difference between day and night is large, it is not possible to add spleen, because the thermal insulation performance of the bee colony will be reduced, and then the worker bees may freeze or freeze to death of the spleen;
The time of bee spring reproduction varies due to different nectar sources, the reason is that the nectar source is the basis for the survival and reproduction of bees, although the early stage of spring reproduction is basically based on artificial feeding to provide food for the bee colony, but the middle and late spring reproduction of the outside world has a certain amount of nectar source, and blindly adding spleen without nectar source is also extremely unfavorable to spring reproduction.
-
1. Choose a place that is dry and sheltered from the rain, there are no obstacles nearby, and the front of you is an open, sunny place. Windward in summer and leeward in winter.
2. From the geographical location, along the edge of the forest, take the hollow and hollow big trees as the search target, carefully search, and choose places with more stones, big old trees, bumpy embankments, fence feet, and abandoned houses.
3. From the observation and tracking of treading water, stepping on the honey worker bees, the 500-meter range of the water bees, the bees 3 kilometers, looking at the number of laps 1 circle 1 km range, 2 laps is a 2 km range, 3 laps are 3 km range, plus the flight direction of the worker bees. Most of the bees are old bees, and their flight paths are not very far. When looking for bees in the mountains, pay attention to the edge of the water source, if you find a bee, it means that there is a hive nearby.
When descending and taking off, the water bees fly in circles. If the circle is counterclockwise when flying and clockwise when returning, it indicates that the hive is on the left side of the mountain; If the direction of the circle is opposite to the above, it indicates that the hive is on the right side of the mountain.
4. Worker bees often discharge a lot of feces near the hive when they recognize the nest and fly or fly in the body. When the collection bee takes off from the nest, it is common to excrete the feces before flying to collect them. Therefore, there must be a lot of bee droppings on the leaves and weeds around the hive.
Bee droppings are yellow, one is large, the other is small, usually the big one is always in the direction of the hive, and should be looked in the direction of the person who made the noise. If the peak manure is found to be gradually dense, then there must be a beehive in the vicinity within about 3 400 metres.
5. Listen to the sound, and look at the flight direction of the worker bees in the sky, and judge the distance of the worker bees, generally about 500 meters, these sounds and flight directions can have obstacles on both sides, and it is easy to hear and see in the middle of your station.
6. Choose the timing, the bees are diligent and work more in the bee season, the autumn is dry and does not rain, and the potatoes are easy to see the stool, the spring is about 2 o'clock in the afternoon, and the new bee is about 3 o'clock in the autumn to test the flight. For the first time after the rain, the weather was clear.
7. Find a honey powder source base, the homing bee flies slowly, has a dull voice, has a drooping tail or has a flower chop dough on both legs, and its behavior is in a straight line. The latter is what we track.
8. The method of finding the hive according to the test flight of the young bee is recommended. In sunny weather, every day at 2-3 o'clock in the afternoon, the young bees will come out of the nest and fly for about half an hour before the nest. This flight is chaotic and loud and noisy. Hearing this sound and looking away, you can find the hive.
9. Use the method of tracking worker bees along the way to find the hive. There are several ways to do this.
Be sure to bathe the baby frequently, change clothes frequently, ensure good hygiene habits, you can wipe with watermelon skin, the baby has symptoms of rash, you can use watermelon skin to relieve itching, you can give the baby to drink some mung bean soup, red bean soup to regulate the temper; When bathing the baby, you must pay attention to the appropriate water temperature, not too hot or too cold, the action must be slight, do not scratch the baby's **, you can put some toys that the baby likes in the bathtub, so as to attract the baby to take a better bath.
With the development of online shopping, e-commerce entrepreneurship is an inevitable trend, and it is a good choice to seize the platform investment and entrepreneurship in advance. If you need financial support for starting a business on an e-commerce platform, you can solve it through small loans. >>>More
Muscle, which is mainly made up of muscle tissue. Muscle cells are elongated and fibrous in shape, so muscle cells are often called myofibers.
There are many ways to prevent wood cracking, and high-temperature styling can be used. It can effectively eliminate the possibility of internal cracking of wood, and can also use mechanical method to prevent cracking, that is, to use anti-cracking rings, and can also apply waterproof coating on the end and surface of wood, which can slow down the evaporation rate of wood surface, which can also reduce the cracking of wood. It can also be removed with a waterproofing agent, which is also a very good way to prevent cracking.
1. Make the coffee in advance and let it cool. If you have a coffee maker at home, please prepare about 350g of espresso, and if you don't have a coffee machine, you can use a strong instant coffee. 2. Separate the egg whites and yolks in two large bowls. >>>More