What to do if the tape is too sticky The place where the tape sticks is always sticky

The tape is always sticky, and that's a real problem. Don't worry, we've got you covered! We need to understand that the tape is too sticky mainly because of the ambient temperature.

When the temperature is low, the adhesive tape will increase, so it is easy to form a sticky situation. We can solve this problem by adjusting the temperature.

Method 1: Heat the tape.

Expose objects with sticky tape to higher temperatures, such as using a hair dryer to heat the tape. By heating it, the sticky substance in the tape becomes fluid, reducing the stickiness. Be careful not to overheat the object or melt the tape.

Method 2: Cool the tape.

If the temperature is too high and the tape is too sticky, the opposite can be done. Cool down objects with sticky tape in the refrigerator or refrigerator. Low temperatures reduce the activity of the sticky substance, which reduces the stickiness of the tape.

Method 3: Use an anti-sticking agent.

There are also anti-sticking products on the market that are specifically designed to solve the problem of over-sticking tape. These anti-sticking agents can be sprayed directly onto sticky tape or applied to surfaces that need to be protected. They have the effect of reducing stickiness and residue, effectively solving the problem of excessive adhesive tape.

Method 4: Change the tape.

If none of the above solutions solve your problem, then consider trying a different type of tape. There are a variety of adhesive tapes on the market to choose from, so you can choose the right one for your needs. For example, for some special materials or objects that need to be replaced frequently, you can choose tape that is less sticky and easy to tear off.

These are just a few ways to solve the problem of sticky tape that is too sticky. In different cases, you can choose the appropriate method to solve this problem according to your actual needs. Remember, temperature is a key factor, and regulating it is important to control tape stickiness.

If you haven't tried anti-sticking agents or other types of tape yet, consider these methods as well. Hope it helps!

1. Wipe and dip some alcohol with a paper towel, preferably industrial alcohol, and the best thing is that it can remove these residual gums very quickly and easily. The effect is also very good and convenient.

2. There is another method, the usage is the same as alcohol acetone, its properties are incompatible with glue, use hand cream, and it will be stained with dirty dust or something. Just slow down. Use sparingly and thoroughly!

Peel off the print on the surface and rub it slowly with your thumb, then squeeze some of the hand cream on top. During the process of scotch glue, the binding water in the middle of the tape is lost, and the bond is tight. You can find that the viscose is starting to gain weight and is very clean.

3. Multi-functional adhesive remover: the liquid will be dripped again, because the tape needs to be dripped layer by layer, when the liquid is dropped, the paper towel can be waterproof because the surface of the transparent tape is a layer of film, and the liquid can be dripped again, and the final treatment of the transparent tape is the method of removing the traces of sticking. Then the entire tape is torn off, if the conditions allow.

This saves you more time.

To make the tape lose its stickiness, you can use a degumming agent, which can easily degum it;

Using a hair dryer, heat the tape product to 2 to 5 minutes to degum.

The use of alcohol can make it sticky, and this method is not recommended to come out with adhesive tape that sticks to the white wall, which can easily bring the wall peel down.

If the tape loses its stickiness, you can usually use a hair dryer to dry the sticky stick. It can then be soaked with water.

Generally, pour some hot water or grease it.

Ways to remove the tape to leave the glue:1. Use a towel and vinegar to remove the glue stains, prepare a vinegar-stained towel, cover the entire place with glue traces, wait until the sticky stains of the double-sided tape are completely wet, and then wipe them slowly to remove the glue stains;

2. You can use heating to soften the adhesive stains, blow the adhesive with a hair dryer to soften the adhesive, when the adhesive force of the adhesive stains becomes weak, it can be easily removed, if there is still a little trace, wipe it with nail polish remover to remove nail polish;

3. It can be removed with alcohol, wind oil essence, dilute sodium water, and can also use a special adhesive remover to remove offset printing, which has a good effect and is very fast to process, and can be used in many places.

Precautions for using adhesive tape:1. Please remove the stains, dust, oil, moisture, etc. from the adhered object before pasting.

2. Please avoid repeated pasting, after pasting, please let it stand for several hours.

3. Please do not directly paste it on the drowsiness, concave and convex surfaces, and rough surfaces of the human body.

4. When storing the tape, please avoid direct sunlight and heat sources, and store it in a cool place.

5. The shelf life of the tape is 6 months after leaving the factory, and the best effect is used within one month.

6. The values recorded in the test report are measured values and are not guaranteed values.

Vinegar: Apply some vinegar to the glue and it will be completely soaked in about a quarter of an hour, then wipe it off with a cloth. Banana Water:

Apply banana water to the glue and use a soft cloth to clean it up. Nail polish remover: First put a few drops on top of nail polish remover, then soak for about 10 minutes, and finally wipe it with a paper towel.

Since nail polish remover is more corrosive, it is necessary to protect items with traces. <

1. Vinegar: Apply some vinegar to the glue, it will be completely soaked in about a quarter of an hour, and then wipe it off with a cloth.

2. Banana water: Apply banana water to the glue and use a soft cloth to clean it.

3. Nail polish remover: first drop a few drops of nail polish remover on it, then soak it for about 10 minutes, and finally wipe it with a paper towel. Since nail polish remover is more corrosive, it is necessary to protect items with traces.