After gluing the paper, the paper is wrinkled, how to make it smooth

Use your fingernails to squeeze the wrinkles to the sides, remember to use your fingernails, and the wrinkles will be much smoother. My notes need to be pasted on a book, which is what it does, it works, and it's generally not wrinkled. Hope.

If you want to open two sheets of paper that are glued together, use a hair dryer.

Evenly blow the place with glue, and when the glue is melted, it can be opened. If you want to completely remove the glue from the paper, I don't think it's possible!

The glue sticks to the paper and will crumple after drying, why not wrinkle or flatten it?

How to flatten the crumpled paper: Slightly wet the paper with distilled water and press the paper. When the paper becomes wrinkled, the internal structure of the cellulose is damaged, resulting in tears. Water softens and flattens the cellulose, making the folds less noticeable.

Only distilled water is effective, and the general tap water will make the paper hard because it contains minerals. When spraying, the watering can should be at least 30 cm away from the paper. You can also moisten the towel with distilled water and gently press the paper.

Hello dear, I am happy to answer your questions, what glue does sulfuric acid paper use does not answer the wrinkle? Answer: Sulfuric acid paper, also known as rigid paper, is relatively thin and hard.

In order to avoid wrinkling after using glue, you can choose some glue that is more transparent and has a certain elasticity, such as PVC glue or glue containing elastic glue components, which is more helpful for wrinkling. In addition, when using glue to coat, it should be applied evenly and in small amounts, so as not to reapply as much as possible to avoid excessive glue causing local deformation of the cardboard. Pay attention to the gentle operation in the gluing process, which can avoid the wrinkling of sulfuric acid paper.

Sulphuric acid paper is suitable for spray glue or glue stick adhesives, which can evenly cover the sulphuric acid paper without exerting too much force on the paper when applying, thus reducing the possibility of the paper wrinkling. In addition, when using glue, you should avoid using Bu Liang's overly wet Nianshen glue, because this can easily cause the sulfuric acid paper to wrinkle. It is recommended to apply the glue to other paper first, and then use a brush or cotton swab to gently apply it to the sulfuric acid paper to let it absorb the glue evenly, and apply it in a gentle way, which can help prevent the sulfuric acid paper from wrinkling.

Summary. If the viscosity of the glue is relatively strong, it should be impossible to be intact.

There are two ways to do this:

1.You can use wine or alcohol to moisten the glue for a while to soften the glue and gently lift it when the paper is half-dry.

2.You can use a hair dryer to blow it, and the glue will slowly soften as long as it is heated.

How to remove the glued paper so that the paper will not rot?

If the viscosity of the glue is relatively strong, it should be impossible to be intact. There are two ways to do this:1

You can use wine or alcohol to moisten the glue for a while to soften the glue and gently lift it when the paper is half-dry. 2.You can rent a hair dryer to blow the rotten, as long as the glue is heated, it will slowly soften.

Hello, I'm sorry, this is the answer I can find so far, the answer is for reference only, I hope you are satisfied. I hope you can like it, thank you very much, and I wish you a smooth work and a happy life! Hope it helps!

Wishing you a happy life! If you think it will be helpful to you, please give it a thumbs up.

Thank you very much for your support, hope mine is helpful to you. If you are satisfied with my service, I hope you can help click on the evaluation below to give a 5-star rating, thank you very much! If you have any other questions to ask me, you can also click to ask Zaimin, and I will serve you wholeheartedly.

I wish you a happy life, a smooth work and good luck