How to remove the dirt left behind after the adhesive tape is torn off

Adhesive tape will leave dirt in the post-Warring States area, have you ever felt uncomfortable with the black stains? Today I recommend several methods to help you solve it, the method is simple and easy to operate 1. Take a paper towel dipped in some alcohol (it is best to use industrial alcohol, if you don't use a medical one) to wipe it, and then rub it a few times to get rid of it. 2. Use acetone.

Same method as above. The advantage of this method is that the amount is small and thorough, and it can remove these residual gums very quickly and easily, which is better than sprinkling sperm. Of course, if you are a household and may not be used by this raw material, then choose alcohol.

Both of these are solvents and are the most effective of all methods. 3. You can use the hand cream we usually use. The way to use is to tear off the printed product on the surface of the item, then squeeze some hand cream on it, slowly rub it with your thumb, and rub it for a while to rub off all the adhesive residues.

The biggest drawback of this approach is that it's a bit slow. The principle of using hand cream to remove dirt is that hand cream is an oily substance, and its properties are incompatible with glue. This is the use of this property for glue removal.

4. Use the nail polish remover that girls always have. The usage is the same as alcohol acetone. The effect is also very good.

Nail polish remover does not require quality, good or general, as long as it can wash off the nail polish. It is cheap to build, and it is always available at home, so it can be used. The third and fourth materials are easy to find and easy to find, as they remove any adhesive residue.

5. Use banana water. Banana water is more common, sold in many places, and cheap. It is an industrial agent used to remove paint, and it is also easy to buy (where paint is sold).

The method is the same as the first and second methods. These methods are simple and easy to operate.

The way to remove the dirt left by tearing off the adhesive tape can be blown with a hair dryer, or with alcohol.

You can use a hair dryer, try it with hot air, just with alcohol.

It's very easy to do, so I'll teach you a few tricks!

1. Wipe it with a paper towel dipped in some alcohol (it is best to use industrial alcohol, or make do with medical treatment), and then rub it a few times to be clean.

2. Use acetone. Same method as above. The amount is small and thorough, and the best thing is that it removes these residual gums very quickly and easily, which is better than sprinkling sperm.

Both of these are solvents and are the most effective of all methods.

3. Use nail polish remover. The usage is the same as alcohol acetone. The effect is also very good. Nail polish remover does not require quality, good or average, as long as it can wash off the nail polish.

4. Use hand cream. Tear off the printed product on the surface first, then squeeze some hand cream on it, and slowly rub it with your thumb, and rub it for a while to rub off all the sticky residues. Just slow down.

Hand cream is an oily substance, and its properties are incompatible with glue. This is the use of this property for glue removal.

These Articles 3 and 4 are introduced in a column of **TV 1. The material is easy to find and convenient, and it can remove residual glue.

5. Use banana water. It is an industrial agent used to remove paint, and it is also easy to buy (where paint is sold). The method is the same as alcohol acetone.

Traces left by adhesive tape can be removed with alcohol.

Pour a little alcohol on a rag or paper towel, wipe the place where the adhesive tape marks will be able to wipe the marks quickly, if there is no alcohol, you can use a stronger liquor or something. You need to soak the rag in hot water for a while, then take out the rag and cover it over the place where the tape marks, and wipe it after a while, and it will be easy to wipe it clean.

Or use acetone solution to remove traces of adhesive tape. When using acetone at night, you should pay attention, as long as you take a very small amount and drop some on the traces, you can quickly wipe off the traces, and the wipe is cleaner than other methods. Using an eraser can also remove adhesive marks, but this method is very tiring and requires a long time or more force to wipe it clean.

Type of glue

Relatively speaking, the traces left by the scotch tape are relatively easy to remove, if the area of the traces is not large, you can directly wipe it with an eraser, and you can wipe it a few times to remove the traces. If the marks are large, you can cover them with a wet towel, and after the moisture erodes into the viscose traces, you can slowly scrape them clean, but make sure that this position is not afraid of water.

It can also be soaked with alcohol, dish soap and polishing water, as the adhesive softens in these items and is easy to clean. It is important to note that when using alcohol, make sure that the edges do not fade. Don't be in a hurry to tear off the double-sided tape when dealing with it, you can use the hot air of the hair dryer to blow it, and you can easily tear it off after a while, if there are still traces of viscose, apply it to it with white flower oil in the house, and then gently wipe it with a rag, and finally wash it with water.

1. Clean up with nail remover. Drop an appropriate amount of nail polish remover on top of the glue marks, soak for about 5 minutes, and then scrub vigorously with wet wipes or clean towels. Nail polish remover is corrosive, so you can gently wipe it in an unimportant place first, and if there is no problem, you can continue to use it.

2. Clean up with a hair dryer and skin care products. Apply an appropriate amount of skin care products on the surface of the glue marks, heat the hair dryer with hot air for about 3 minutes, and wipe it clean with an eraser or towel. <

1. Clean up with nail remover. Drop an appropriate amount of nail polish remover on top of the glue marks, soak for about 5 minutes, and then scrub vigorously with a wet towel or a clean towel. It should be noted that nail polish remover is corrosive, and during use, care should be taken to protect items from corrosion.

You can gently wipe it in an unimportant place first, and if there is no problem, you can continue to use it.

2. Clean up with a hair dryer and skin care products. Apply an appropriate amount of skin care products on the surface of the glue marks, heat the hair dryer with hot air for about 3 minutes, and wipe it clean with an eraser or towel. Since the skin care products are supplemented with the binding water in the tape, the viscosity is reduced and the effect of removing marks is obvious.

3. Clean up with new tape and repeatedly paste the glue marks. Due to the good adhesion of the new tape, the remaining glue marks can be glued, and the remaining part that cannot be adhered to can be wiped clean with a towel.

4. Clean up with alcohol. Mix a soft cloth with a sufficient amount of 95% alcohol and gently wipe the marks to soften and detach from the object. Alcohol generally does not cause damage to plastic or painted surfaces.