What is the difference between floor height and clear height, and what is the difference between flo

The difference between floor height and clear height is as follows:

1. The definitions are different.

Storey height refers to the vertical distance between two adjacent floors or the floor and the ground, that is, the height of a one-story house.

The clear height is the difference in the thickness of the floor slab or the height of the structural layer. It is a height space that buyers can really use after moving in.

2. The calculation formula is different.

The formula for calculating the floor height is: floor height, indoor clear height, and floor thickness. If the top floor is a sloped roof, the floor height is calculated as the vertical distance between the floor surface and the lower part of the roof. Ceiling height Floor slab thickness.

3. The standards are different.

According to the relevant provisions of the "Residential Design Code", the floor height of ordinary residential buildings is generally meters. The net height is generally not less than meters, the local net height should not be less than meters, and the area should not be greater than 1 3 of the indoor use area.

Precautions for measuring floor height and clear height

1. The height we measured indoors is the net height, according to the provisions of the "Concrete Structure of High-rise Buildings", the thickness of the cast-in-place slab on the general floor shall not be less than meters, and the top floor slab shall not be less than meters. Therefore, when measuring the height of a house, it is necessary to pay attention to subtracting the thickness of the floor slab.

2. The commercial housing sales contract generally signed by buyers stipulates the floor height, and many friends measure the net height when handing over the house for acceptance, ignoring the thickness of the floor slab. Therefore, special attention should be paid to avoid unnecessary troubles in the later stage, and it is recommended to clearly indicate in the purchase contract: the developer's liability for breach of contract, compensation method and amount.

And mark the detailed height of the floor height and the net height, the thickness of the wall, the size of the doors and windows, etc.

Ceiling height and clear height are concepts commonly used in design and manufacturing, and they have some differences in different domains and contexts.

In architecture and civil engineering, floor height refers to the height of a floor or room, usually the vertical distance from floor to ceiling. Floor height refers to the height of the entire space, including floors, ceilings, and possible suspended ceilings, air conditioning, and electrical equipment. Storey heights are often used in architectural design and interior arrangements to determine the use and function of a space.

Whereas, the clear height refers to the usable height remaining after deducting the height of various structures and equipment in the high level of the floor. In construction, clear height refers to the height of the actual usable space from floor to ceiling, excluding the height of fixed structures and equipment such as beams, columns, ducts, lighting fixtures, etc. The clear height usually takes into account the needs of human activity to ensure the comfort and practicality of the space.

In mechanical engineering and drawing, the meaning of floor height and clear height is also different. Floor height generally refers to the difference in height between different features in an object or part on the construction. Layer height can be used to represent the distance between different features, components, or assemblies of a part.

Clear height is the clear height from the bottom to the top surface of a feature, minus the height of any additional structures, parts, or features.

In summary, in architecture and civil engineering, the floor height refers to the height of the entire space, while the clear height refers to the height of the actual usable space. In machine building and cartography, floor height is often used to describe the height difference between different features, while clear height refers to the actual height of the feature.

When buying a house, many friends will pay great attention to the floor height of the house, but when we measure the house, we can generally only measure the net height of the house, and there is a difference between the floor height and the net height, so what is the difference between the floor height and the net height? Let's take a look.

What is the difference between floor height and clear height

1. The so-called floor height actually refers to the actual height of one of the floors in the building, that is, the actual distance from the ground of the current floor to the ground of the previous floor. The clear height refers to the vertical height between the ground of this floor and the bottom surface of the upper floor, which is the actual height that we can measure indoors with a measuring tape.

2. The height of the net height is generally included in the floor height, that is to say, the net height of the house on the same floor plus the actual thickness of the floor slab on the floor is equal to the floor height of the house on the floor. In general, in residential buildings, the value of floor height is generally about meters, and the net height can not be less than meters, and part of the clear height can not be less than meters.

3. If the roof of the house is designed to be sloped, then at least half of the interior area of the house must be kept at a clear height of more than meters. In the bathroom and kitchen area, the ceiling height should generally be kept above the meter, and the distance between the lower surface of the water pipe and the ground should be kept at least the meter, while also ensuring that it does not interfere with the normal use of the windows by the owner.

4. In order to avoid being deceived, it is recommended that after the owner delivers the house, it is best to make an accurate measurement of the indoor height of the house, and the measured height is the net height of the house, which is the height of the space that the owner can use after moving in. After the measurement, check with the clear height of the house marked in the contract to see if there is a large deviation.

5. In order to avoid disputes due to factors such as house structure and house height in the later stage, it is recommended that you must take the floor plan of the house as an attachment to the contract before signing the purchase contract, and also ask the developer to mark the clear and detailed dimensions on the drawings, such as: house height, wall thickness, door and window location, etc.

The above is a detailed introduction to what is the difference between floor height and clear height, I hope it can help you distinguish between floor height and clear height. There is a difference between the height of the floor and the clear height, relatively speaking, the height of the clear height plus the thickness of the floor slab is equal to the height of the floor height.

Floor height generally refers to the floor height, that is, the height of the first floor of the building, and the floor height of ordinary residential buildings is generally meters. The clear height refers to the shortest distance between the upper and lower floors of the house, that is, the distance between the ground and the roof is measured. According to the "Residential Design Code", it is generally not less than meters, and the local Li Fan net height should not be less than meters.

Floor height is the height including the clear height, plus the thickness of the floor slab of the upper floor, that is, the floor height of the indoor clear height of the floor slab.

The relationship between indoor clear height and floor height can be expressed by formula: floor height = indoor clear height + floor thickness, that is, the difference between floor height and floor thickness is called indoor clear height. In the "Commercial Housing Sales Contract", the floor height is generally agreed, and many people measure the indoor net height when handing over the house for acceptance, and ignore the thickness of the floor slab.

Under normal circumstances, the higher the floor height of the house, the greater the temperature difference between the upper and lower spaces in the room, and the stronger the air convection in the room, the better the ventilation effect, but on the other hand, it will lead to relatively poor thermal insulation and energy saving of the house.

According to the "Residential Design Code" jointly issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the Ministry of Housing and Urban-Rural Development, the floor height of ordinary commercial residential buildings should be meters. The specific requirements are as follows:

1) The indoor clear height of the bedroom and living room (hall) should not be less than meters; The clear height of part of the space must not be less than meters, and its area should not be more than one-third of the total usable area of the house.

2) Some houses on the top floor with a sloping roof shall not be less than meters in the net height of one-half of the area if it is used as a bedroom or living room for normal living.

3) In order to meet the daily use needs of buyers, the indoor clear height of the general kitchen and bathroom should not be less than meters.

4) The indoor drainage pipes of the kitchen and bathroom shall not affect the normal opening of doors and windows, and the net height from the lower surface of the water pipe to the floor of the room shall not be less than meters.

1. Floor height generally refers to the floor height. That is, the height of the first floor of the building, according to the "Residential Design Code", the height of the ordinary residential floor is generally meters.

2. The net height refers to the shortest distance between the upper and lower floors of the house, that is, the distance between the ground and the roof is measured. According to the "Residential Design Code", it is generally not less than meters, the local clear height should not be less than meters, and its area should not be greater than 1 3 of the indoor use area.

3. Difference: The floor height is the height including the net height, plus the thickness of the floor slab on the upper floor, that is, the floor height = indoor net height + floor thickness.

Ceiling height and clear height standards.

It is generally believed that the higher the floor height of the house, the greater the temperature difference between the indoor high and low temperatures, the better the air convection, and the more comfortable the human body feels, but the heat preservation and energy saving of the house will be relatively poor. According to the "Residential Design Code" issued by the Ministry of Housing and Urban-Rural Development, the height of residential floors should be.

1. The indoor net height of the bedroom and living room (hall) should not be less than meters, and the local net height should not be less than meters, and its area should not be greater than 1 3 of the indoor usable area.

2. When using the space in the sloping roof as a bedroom and living room (hall), the indoor net height of its 1 2 area should not be less than meters.

3. The indoor net height of the kitchen and bathroom should not be less than meters.

4. The net distance between the lower surface of the drainage pipe and the floor and the ground in the kitchen and bathroom shall not be less than meters, and the opening of doors and windows shall not be affected.

The impact of the height of the storeys of the house.

1. The height of space has a great impact on people's spiritual feelings, which can be analyzed from two aspects: one is the height of the absolute book on a human scale; The Erzhou Mausoleum is the relative height of the spatial scale, that is, the proportional relationship between height and area.

The comfort level of the residential space is based on the human scale and the feeling of psychological acceptance, and the smaller the relative height, the stronger the gravitational pull between the top surface and the ground. If the space is too high, it will make people feel empty, intimate, and lost indoors; If the space is too low, it will make people feel depressed.

2. Insufficient lighting and ventilation: the floor height is too low will affect the lighting and ventilation, and if the lighting and ventilation are not good, the indoor temperature and humidity cannot be well adjusted, so as to achieve the desired comfort level.

3. Affect the decoration effect: the house with a low floor height cannot use the ceiling during the decoration, otherwise the room will appear lower. At the same time, it also makes trouble not to install wall cabinets, etc., which restricts the decoration of the house, and cannot reflect and meet the home ideals and wishes of consumers, leaving regrets for consumers, and to a certain extent, also reducing the quality of life.

What is the floor height and net height.

The floor height of a dwelling is the distance between the lower floor or slab surface and the upper cover, that is, the height of the one-story house. In the "Coordinated Standard for Residential Building Modulus" issued in 1987, it is clearly stipulated that the parameters for the floor height of brick-concrete residential buildings are: meters, meters, meters.

The clear height of a dwelling is the distance between the lower floor or the upper surface of the floor slab and the lower surface of the upper slab. The relationship between the clear height and the height of the bridge can be expressed by the formula:

Ceiling height Floor slab thickness.

That is, the difference between the height of the floor and the thickness of the floor slab is called the "clear height".

The difference between floor height and clear height.

Floor height and clear height are different concepts, and the floor height includes the clear height and the thickness of the floor slab, and the clear height is the height of the space after the thickness of the floor slab is removed. The thickness of the floor slab is generally between about 0,20.

The floor height is the distance from the middle of the lower floor slab to the middle of the upper floor slab, and the net height is the distance from the indoor ground to the ceiling, and the thickness of the residential floor slab of the general frame structure is 10 12 cm, that is, the floor height of the side leakage meter, if the floor thickness is deducted by 10 cm, and then the plastering layer of the floor and ceiling is deducted, the net height is generally normal.

According to the relevant provisions of the "Residential Design Code" jointly issued by the State Bureau of Quality and Technical Supervision and the Ministry of Construction, the floor height of ordinary residential buildings should not be higher; The indoor net height of the bedroom and living room (hall) should not be lower, and the local net height should not be lower, and its area should not be greater than 1 3 of the indoor usable area; When the space in the sloping roof is used as a bedroom and living room (hall), the indoor net height of its 1 2 area shall not be less than; The indoor clear height of the kitchen and bathroom should not be lower. The net distance between the lower surface of the drainage pipe and the floor and ground in the kitchen and bathroom shall not be lower, and the opening of doors and windows shall not be affected. (Ceiling height:

The vertical distance between the upper and lower floors or the floor and the ground. Ceiling height: The vertical distance between the floor or ground level and the bottom surface of the upper floor slab or ceiling. )

1. Definition of floor height.

The so-called floor height is the vertical distance from the floor above the floor to the ground of the floor. If you want to calculate the floor height of a sloped roof, then you need to follow the vertical distance from the lowest part of the floor slab to the ground.

The Ministry of Housing and Urban-Rural Development of the People's Republic of China and the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China jointly issued the "Residential Design Code", which stipulates that the height of residential floors should be meters. In 1987, the "Coordinated Standard for Residential Building Modulus" clearly stipulates that the parameters used for the floor height of brick-concrete residential buildings are: meters, meters, meters.

2. Definition of clear height.

The net height is closely related to the layer height, which is to use the layer height to deduct the thickness of the structural layer, that is, the net height = layer height - the thickness of the structural layer. The clear height can be measured directly in the room, and the entire height space can be used in daily life.

It can be understood as: the distance between the upper surface of the lower floor or the floor slab and the lower surface of the upper floor slab, and the relationship between the net height of the stair and the floor height can be expressed by the formula: net height = floor height - floor thickness, that is, the difference between the floor height and the floor thickness is called the net height.

According to the "Residential Design Code" jointly issued by the Ministry of Housing and Urban-Rural Development and the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, the height of residential floors should be. The indoor net height of the bedroom and living room (hall) should not be lower, and the local net height should not be lower, and its area should not be greater than 1 3 of the indoor usable area;

3. The relationship between floor height and net height.

In addition to "meters", the height measurement of residential buildings in China can also be calculated by "town layer", and the height of each floor has certain requirements in the design, which is called floor height. Floor height refers to the vertical distance between the lower ground and the upper floor surface, and the floor height minus the floor thickness is the clear height.

Under normal circumstances, if the higher the floor height of the house, then the indoor temperature difference will be relatively large, the better the convection, and the more comfortable it will be, but the heat preservation and energy saving will become worse.