800 full glazed floor tiles, one open two, and then on the wall, will the bricks fall off by the con

Probably not. The decorator will have professional tools, even if the 800 floor tiles are cut in half, they can also be firmly pasted with the conventional professional sticking method.

It won't fall, the current floor tile master has that kind of strong adhesive behind this kind of brick, and it generally won't fall, and there will be no problem for professional people to do it.

Generally, no. Because the regular application will be stronger, the tiles will not necessarily fall off.

1. Especially the full tiles with a side length of more than 600 are higher in weight and more likely to fall off, causing danger. Therefore, when the large-size full ceramic tile is used as a floor tile, the pre-embedded copper wire dry hanging method is usually adopted, and a fuse is added between the brick and the wall to eliminate the hidden danger of tile falling and leaking. The steps are as follows:

Groove on the back of the tile.

2. The copper wire is buried in the slot.

3. Use glue to fix the structure.

4. The backplate is fixed with screws, and the backplate is tied with the brick body strongly.

5. The effect of paving.

The quality of the glazed ceramic tile is better, the water absorption rate is low, and the difficulty of natural bonding is relatively large, so it is necessary to use special tile adhesive to pave, not only the adhesion force is stronger, but also the construction is simpler, no need to wet the wall, soak the tile, fix the support and other steps, only need to add water in proportion, the following is the detailed construction method:

The master who has been doing decoration for more than 20 years will tell you how to paste 800*800 floor tiles, fast and good.

Summary. The tiles have only been pasted for a month and they fall off, should they all be reworked? If the tiles are loose or even falling, the treatment methods are divided into two situations: the mortar falls and the mortar does not fall.

If the mortar is not loose but the tiles are falling off, it means that it is not the mortar problem. You can clean the back of the tile first, and then use a special glue mixed with a little cement to apply it to the back of the tile and re-paste it; If the mortar and the tile are loose and cracked together, gently chisel some pits on the foundation surface, and then re-pave the cement mortar mixed with special glue. If the tile falls off and other quality problems, the simplest solution is to remove the problematic tile, reprocess the base layer, and then pave.

If there is a quality problem in a large area, it has to be reworked.

The tiles have only been pasted for a month and they fall off, should they all be reworked?

The tiles have only been pasted for a month and they fall off, should they all be reworked? If the tiles are loose or even falling, the treatment methods are divided into two situations: the mortar falls and the mortar does not fall. If the mortar is not loose but the tiles are falling off, it means that it is not the mortar problem.

You can clean the back of the tile first, and then use a special glue mixed with a little cement to apply it to the back of the tile and re-paste it; If the mortar and the tile are loose and cracked together, gently chisel some pits on the foundation surface, and then re-pave the cement mortar mixed with special glue. If the tile falls off and other quality problems, the simplest solution is to remove the problematic tile, reprocess the base layer, and then pave. If there is a quality problem in a large area, it has to be reworked.

The flue of my whole house has fallen off, do I need to reattach the whole house? First of all, the brushing (or concave and convex treatment of the surface layer), easy to attach, glue, five points can be (five-point paving home decoration is rarely used, because there is empty, that is, the decoration is often said to be hollow. But there is nothing wrong with the five-point paving!

Hook seam treatment! Can! Let's talk about five-point adhesive, which is conducive to shockproof, elastic and not easy to fall.

The hook seam must be dealt with well.

Kiss, <>

We're glad to answer your questions! There are two main reasons for the fall off of the tiles directly on the wall tiles: the construction workers are not in accordance with the specifications of the construction, the tile adhesive materials used do not meet the requirements, if the foundation of the tiles below is relatively firm, knocking on the phenomenon of empty drums, you can choose to use structural adhesive to glue, paste new tiles will not fall, but with cement mortar to paste is not pasted, so you can only use structural adhesive or marble glue and other colloids for bonding will not fall, It will also be very strong and durable.

Hope mine can help you! <>

Ceramic tile is an indispensable and important part of the decoration of life now, and its specifications are large and small, and there are many varietiesThe decoration is exquisite, so the 800 full-glazed floor tiles are divided into two as wall tiles, will the conventional pasting method fall off?

First of all, we need to know what is the full glazed brick, the full glazed floor tile its embryo body is to use the antique way, so it also belongs to one of the glazed bricks, of course, although it belongs to the embryo body and the general conventional is not the same. The ground layer of fully glazed floor tiles is one of the most significant features that distinguishes the full glazed floor tiles from other floor tiles and glazed tiles. So for its technological process, we can see the origin of its name.

For whether the glazed brick can be used as a wall tile on the wall, the answer is yes, we will now talk about several ways to paste itThe first method is to use tile adhesive for paving, this tile adhesive is also the most common, generally sold in stores, very convenient. The second method is similar to the flooring process, which is carried out by using cement and slurry and glue.

The third method, which is also the most reliable method, is to take the dry hanging directly.

Although the wall on the floor tile is anti-fouling and beautiful, there are also a few points to pay attention toFirst, do not use conventional cement mortar to paste the full glazed floor tiles on the wall, that is because this way is not safe. Second, when using tile adhesive or tile adhesive and other methods to paste, be sure to check the back of the tile before pasting the tile to see if there is little release agent or wax.

Putting excess floor tiles on the wall is economical and affordable. Ask a professional person to do the laying, and don't look for someone to start work in order to save money.

When pasting, as long as the traditional cement grout is not used to paste the bricks, it can be.

It is still necessary to choose good cement for the wall tiles, and the method can be conventional.

No, but the cement should be good, you tell the master, and he will help you get it right.

If the conventional sticking method is strictly in accordance with the operation process, the bricks will not be dropped.

Generally, no, the current technology is very mature and will not fall.

No, the current installers and accessories are very professional, as long as the construction is qualified, it will definitely not be dropped.

This needs to be done by a professional master, probably not, but the master still needs to see it.

The full glazed brick applied to the full glaze integrates the advantages of polished brick and antique brick and will not fall.

The upper wall of the floor tile is not as good as the wall tile, and the floor tile is easy to fall off.

So good because the technical equipment of the domestic production of full glazed tiles is not up to standard

If it is under normal circumstances, there will be no phenomenon of falling bricks under normal construction.

Probably not, if the decoration master can't guarantee it, he can't decorate it for you.

Generally, bricks will not be dropped, but it also depends on the skills of the workers you use.

Normally, it won't, but it depends on how dry or wet the wall is, too dry or too wet.

This also depends on the bricklayer's technique, if it is not very powerful, it will not work.

The bricklayer makes sense, you just obey it, or you can go to the trouble.

The construction procedure of the wall glazed tile paste: the wall glazed tile paste is one of the main technical jobs engaged in the home decoration imitation process. The pasting procedure of the specification for wall glazed tiles is:

Grassroots cleaning treatment, plastering the bottom ash, selecting all glazed tiles, soaking, arranging bricks, elastic lines, pasting standard points, pasting tiles, hooking, wiping, cleaning.

Construction specification for the brick wall paving of the fully glazed porcelain excavation bridge.

1. When the base layer is treated, all kinds of dirt on the wall should be cleaned up, and watered and moistened one day in advance. If the base layer is a new wall, when the cement mortar is dry, it should be arranged with bricks, elastic lines, and pasted surface bricks.

2. Before the formal pasting, the standard point must be pasted to control the flatness of the pasting surface, and the flatness should be checked with a ruler at any time during operation.

3. The glazed tiles must be soaked in water for more than two hours before pasting, and the bricks should be taken out to dry for later use. When pasting, paste from the bottom up, the mortar is required to be full, and when the ash is lost, the heavy adhesive must be removed, and it is not allowed to plug the ash from the brick joints and mouths.

4. When paving, when encountering pipelines, lamp switches, and supporting parts of bathroom equipment, etc., it must be cut and matched with a whole brick sleeve, and it is forbidden to use non-judgment whole bricks to patchwork and paste. The whole room or independent parts should be pasted at one time, and when it cannot be completed at one time, the stubble should be left in the construction joint or corner.

5. The acceptance of the wall glazed tile paste must be firm, and the hollow drum rate must be within 3%. There are no defects such as skew, missing edges and cracks. The surface of the wall tile paving should be smooth, clean, the color and luster should be coordinated, the national case should be reasonably arranged, and there should be no discoloration, alkali, stains and significant gloss damage.

The brick joints are densely filled, straight, uniform in width and narrowness, consistent in color, and the overlap direction at the yin and yang corners is correct. The use of non-whole bricks is appropriate and straight. The reserved holes are the correct size and the edges are neat.

Choose the right tile adhesive to avoid problems such as tile falling off and hollowing, frequent maintenance in the later stage, and using MS glue to paste tiles, the effect is much better than the traditional cement yellow sand tiles. The material cost of cement and yellow sand is eliminated, and the labor cost is also reduced a lot, and the construction efficiency is improved, so I can move in early. Greenridge MS modified silane glue, all properties are excellent, sealing and waterproof, high and low temperature construction, the highest adhesion force reaches 30kg square centimeters, with good thixotropy and extrusion, the environmental requirements are not harsh, in the weather of -50 to 150, the performance will not change.

Strong weather resistance, the colloid itself will not produce bubbles, and can resist rain, snow, and ultraviolet rays. Long-term exposure to the harsh environment of the outdoors can effectively inhibit and avoid cracking, breakage, yellowing, mildew and degumming of the sealant. Moreover, Greenridge MS glue has zero formaldehyde, zero isocyanate, solvent-free, non-toxic and tasteless, and the VOC emission is far lower than the national standard, which does not damage the environmental performance of the substrate.

It has a wide range of adhesion to substrates, and most inorganic, metal, wood, concrete, ceramics, glass, stone, etc. have good adhesion properties. Good elastic deformation ability: high elastic deformation ability can ensure that the adhesive surface can adapt to various external tensile and compression deformation, absorb and compensate dynamic loads, evenly transmit the force, prevent premature fatigue of the material, and always maintain effective sealing and bonding.

The decorator used Greenridge MS glue GT168 structural adhesive to carry out strip-shaped gluing, bonding to the wall, adjusting the position and temporary auxiliary fixing for a few minutes, and it was fine. When the colloid absorbs the moisture in the air and completely solidifies, it sticks very firmly. He said that the adhesive surface per square centimeter can bear 30 kilograms, has strong weather resistance, and is not easy to become black and mildew.

Hope it helps.