-
Just use anti-slip liquid, you can lay a layer of plastic non-slip mat, thin, with eyelets, ** is not expensive, it is the kind used in the bathroom, the bathroom floor is best with non-slip tiles, of course, you can also choose floor tiles according to your liking. The bathroom does not necessarily have to be non-slip floor tiles, according to the overall decoration of the home, if there are children or the elderly, try to use non-slip floor tiles, after all, the health of children and the elderly is the most important.
-
How to deal with the toilet floor tiles are not non-slip, this is too simple The easiest way is to use an electric hammer to replace the original miscellaneous pieces with a new non-slip one.
-
You can buy a non-slip mat to install in the toilet, and if you are not afraid of trouble, you can choose to change the non-slip floor tiles.
-
What's the best way to do this, you can only destroy it and replace the non-slip floor tiles.
-
How to deal with the toilet floor tiles that are not non-slip? Be sure to buy a non-slip floor tile bathroom because it always has water.
-
The traditional treatment methods of bathroom tile slipping include anti-slip mats, anti-slip stickers, anti-slip strips, and anti-slip agents.
Here's an introduction and comparison of several methods.
Traditional methods of handling non-slip:
1.Non-slip mats.
2.Non-slip sticker.
The surface of the anti-slip paste is selected anti-slip sand and sand-free special anti-slip materials, and the back primer uses strong mucus to firmly stick to the surface of the object to be anti-slip. Anti-slip tapes can be used to prevent slipping on smooth stairs, steps, ramps, vehicles, and other surfaces.
3.Anti-slip strips.
Anti-slip strips are anti-slip measures on the surface layer of smooth treads. Generally, buildings often make two slightly protruding emery anti-slip strips at the close step of the terrazzo surface, or use cylinder bricks and cast iron as anti-slip wrappers.
Anti-slip agent treatment for floor tiles:
Anti-slip agent is a liquid that can prevent slipping and can be used on natural stone or hard tile surfaces such as tiles, paving tiles, mosaic floor tiles, terrazzo, slate, granite, marble, glazed tiles, ceramics and ceramic bathtubs.
Steps for the treatment of anti-slip agent for floor tiles:
The first step is to test the ground condition.
In the face of any construction site, it is necessary to determine a test area, first clean the ground, dip it in water with a flat mop, and apply it directly on the site to see whether the ground on the site will be in a state of water accumulation;
If there is a state of water accumulation, the second step of wax removal is carried out;
The second step is to remove the wax or clean the floor.
The third step is to apply a protective agent.
The dosage standards for the application of anti-slip agent are as follows:
The anti-slip agent application tool absorbs 300ml of water in a dry state;
I put a dry protective agent special application tool in 1 kg of antislip agent and take it out and squeeze it three times).
kilograms of anti-slip agent, according to the above standards, can be taken 7 times, each time according to the usual amount of 16 tiles;
The size of each tile is:
1 kg of anti-slip agent can apply 112 tiles, and the converted area is, a bucket of 10 kg of anti-slip agent can be processed;
Note: If the anti-slip agent still collects water after being applied at this step, then add a little detergent to the anti-slip agent;
The fourth step is to wait for the effect.
After applying all the ground to be applied, let it stand for more than 10 minutes;
The fifth step is to clean the floor and test the effect.
Because the anti-slip agent has the characteristics of semi-oiliness, it is necessary to thoroughly scrub the surface with a flat mop or brush while rinsing with clean water, so that the anti-slip effect will be perfectly presented, otherwise the anti-slip effect cannot be tested when the ground anti-slip agent is not cleaned.
Compare the advantages and disadvantages of several ways.
Traditional: The non-slip mat should be cleaned regularly, replaced frequently and costly. The biggest advantage is that the anti-slip effect is good!
Floor tile anti-slip agent: low cost, simple to use, only 10 minutes can be completed, the effect is long-lasting, once applied, can achieve 10 years of anti-slip effect, the only deficiency is to maintain a little. For details, please see the following table:
-
What are we doing?
Clause. 1. Simple anti-slip method for floor tiles.
It is to pay attention when mopping the floor, to mop wet and then dry, or to dry before walking, be sure to keep the floor tile surface dry, there is water or oil stains on the floor tile is easy to slip. Clause.
2. Professional anti-slip method for floor tiles.
There is a product called tile anti-slip agent, which is suitable for glazed tiles, full-body tiles, polished tiles, vitrified tiles, antique tiles, anti-slip tiles, mosaics and other stone floor tiles.
Its principle of action is that the tile anti-slip agent can effectively penetrate into the pores of floor tiles and stones, dissolve a small amount of silicon, make the original capillary pores thicker, and form many small and invisible nano-level dents on the surface. When the sole of the foot or sole passes through the ground, the water will be extruded from the capillary under pressure to make the capillary in a vacuum state, so that the contact with the sole of the foot can form a physical suction cup.
The coefficient of friction on the ground is greatly enhanced. It reduces the risk of slipping and falling after the floor tiles are wet, and has a "astringent when exposed to water" effect, making the wet water on the ground more non-slip than when dry. It is absolutely safe for people to walk on it!
Even if the surface is partially worn in the future, the existing structural changes inside the ground are partially stable, so the anti-slip effect can be maintained for a long time. The treated floor tiles or floor stones also have obvious effects when drying, and their anti-slip effect is increased several times in the water or greasy state, and it is effective for a long time after anti-slip treatment. Clause.
3. Anti-skid treatment steps on the ground.
A: Clean the place and clean the floor. (Note: If there is wax on the surface of the ground, the wax should be removed with wax removal water before cleaning.) )
B: Apply anti-slip liquid, apply evenly, grasp the thickness of the liquid surface and moisturizing time, and moisturize in time if dry surface appears. It is sufficient when there is a sense of resistance after testing.
C: Rinse with water.
d: After the anti-slip treatment is completed, it will be dried naturally for 1-2 hours, and the water will be moistened if necessary, and then it will be used. Clause.
Fourth, the principle of anti-slip.
Through the chemical reaction with the ground tile or the ground stone enamel bathtub, it has super penetration, which can effectively penetrate into the capillary channel of the floor tile and stone enamel bathtub, so that the channel is widened, and the upper layer forms a pit, and the contact with the sole of the foot can form a physical suction cup effect when it encounters water or oil stains, even if the ground part is worn out, the original internal structure remains unchanged and can ensure that it will not fall off at any time, the color of the ground is basically unchanged, and the lifelong anti-slip effect is guaranteed by anti-slip treatment and has strong chemical resistance, weather resistance, ultraviolet resistance, etc. The anti-slip effect is obvious, and the anti-slip effect is increased by multiple after encountering water and greasy. 
-
1. Non-slip mat.
This is a measure that many owners may take, the bathroom floor is more slippery, then buy a non-slip mat to lay underneath, after the non-slip mat is laid on the bathroom floor tile, the ground is indeed not very slippery, but the non-slip mat also has disadvantages, that is, it will not take long to get dirty, and it is very troublesome to clean and then re-pave.
2. Anti-slip fluid.
This is a small number of owners to know the anti-slip method, in a treasure and a certain east have sold a kind of anti-slip fluid for floor tiles, as long as the floor tiles in the bathroom are more slippery, you can buy this special anti-slip fluid, but this anti-slip fluid is real and fake, we must learn to choose the best anti-slip fluid.
3. Non-slip slippers.
Non-slip slippers are also a good way to prevent slipping and falling in the bathroom, not only the bathroom, but also the living room and bedroom, if it is also slippery, then non-slip slippers can come in handy, but how good the specific effect of non-slip slippers is, it is difficult to say, and what to do if the non-slip slippers are dirty? It also has to be washed, but in general, the bathroom floor is slippery, and it is good to buy a non-slip slipper.
4. Clean and wipe every day.
If you want the bathroom floor not to be slippery, the best way is definitely to keep the bathroom dry, as long as the bathroom floor is dry, it will not be too slippery under normal circumstances, but it is very difficult to say simple, you need to take a bath in the bathroom, you need to brush your teeth and wash your face, go to the toilet, etc., it is inevitable that there will be water on the ground, so wiping every day can keep the ground dry, but this method does not remove the roots.
5. Dry and wet separation.
In fact, this is to be considered when decorating the design, that is, if you want to non-slip bathroom floor, in fact, the main thing is that as long as there is no water on the bathroom floor, the general ground will not be too slippery, even if the floor tiles you buy are more slippery, as long as there is no water, this dry and wet separation design can meet the water will not appear in other places in the shower area when taking a bath, which greatly reduces the probability of wet bathroom floor.
-
This phenomenon may be due to the fact that the tiles themselves are not slippery, or they may be due to the fact that the tiles become more slippery after they get wet. There are two ways to solve this problem more effectively, such as buying some anti-slip mats or using anti-slip agents for floor tiles.
1. Use non-slip mats.
Anti-slip mat is a product specially produced for the slippery bathroom tiles. At present, there are many non-slip mats on the market, and a mat is not expensive, so many families will choose to put a non-slip mat at the door of the bathroom or in the bathing area. However, the disadvantage of the anti-slip mat is that its area is limited, and it can only ensure the safety of a part of the area, in addition, the anti-slip mat is easy to get dirty, and basically needs to be cleaned once every six months, which is somewhat inconvenient to use.
Second, the use of anti-slip agent for floor tiles.
Floor tile anti-slip agent is a professional product, it can be applied to many materials of floor tiles, such as glazed tiles, polished tiles and so on. It works by penetrating into the very small holes of the floor tiles, dissolving a small amount of silicon, making the original small holes slightly larger and forming invisible dents on the surface of the tiles. When people step on such waterlogged tiles, they can use the air pressure difference to increase friction and avoid slipping.
The operation of this method is somewhat more complicated than the previous method, you need to clean the bathroom tile floor first, then evenly apply anti-slip liquid, and then rinse it with clean water, and let it dry naturally for about two hours. Floor tile anti-slip fluid is solved from a professional point of view, because it can change the physical structure of the tile, which can have a long-term anti-slip effect.
-
As the most private and important place in the house, the bathroom should pay attention to all kinds of details when decorating, and a good living environment can not only allow us to enjoy a comfortable discharge environment, but also improve the quality of life of the whole house. Take the tile of the bathroom as an example, the bathroom tile paving is a hard work, not only the slope of the tile paving should be reserved, the tile treatment of the floor drain is also very important, if the tile laying is not handled well, then you will have to endure the trouble of water on the ground every day.
Toilet slope.
The slope of the bathroom tiles depends on the experienced master to grasp, the general ground should be 1% 3% slope slope to the floor drain, the lowest place,; The toilet floor should be no less than 3 cm lower than the indoor floor. The slope will affect the installation of toilets and other sanitary ware, and the slope is too small to play a role in drainage.
1. Cross paving method.
With the floor drain as the center, the four sides are aligned with the floor tile reticle and extend to the perimeter, so that the floor tile not only maintains the integrity of the tile, but also the slope looks better.
2. Dislocation paving method.
Using the method of dislocation paving of floor tiles, leaving the position of floor drain is not only beautiful but also ensures the integrity of ceramic tiles.
3. Four-sided cutting method.
Choose a suitable location for the floor drain, place the floor drain in the middle of the floor tile, cut the floor tile diagonally, and make a groove with a certain slope when paving, so as to better control the position and facilitate the drainage of the bathroom.
4. Ground groove pulling method.
The tiles are cut into a trough and laid in the middle of the toilet to raise it, and the floor drain is installed in the trough around the perimeter. This design can not only drain water but also prevent slipping, killing two birds with one stone.
In addition, many friends are paving tiles when decorating to buy floor drains, this practice is actually wrong, because the shape of the floor drain panel is various, if not bought in advance, the master does not know how much sewer hole size to reserve when paving tiles, so as not to install the trouble of asymmetry between the reserved hole and the floor drain size, so the purchase of floor drain should be carried out together with the tiles.
-
Do anti-slip treatment services on the ground to reduce the risk of slipping.
In order to reduce the risk of slipping and ensure the safety of people's ground walking, the "ground anti-slip treatment service" has been launched to carry out anti-skid treatment quickly, effectively and safely, effectively reduce the harm of slipping, and provide high-quality and professional anti-slip treatment services for all units and commercial places in the society that need anti-slip on the ground, pay more attention to the areas that are easy to slip, care for the people who are prone to slipping, and protect the safety of life and property.
Install handrails. If there is an accident, you can pull the handrail to borrow force, so that you can help stand upright, and you can also have a pull to avoid falling.
-
Install the anti-slip mat, this anti-slip mat is usually made of PVC soft rubber, AB rubber, rubber, PU, ordinary silicone, polymer materials, the bottom is flat, because the polymer adsorption capacity is strong, can play a good anti-slip role.
1. If there are only some stains in the kitchen, you can use stain remover. This stain remover only needs to be applied a little, first to remove the dirty surface dust, and then to apply the stain remover to the surface, including crevices. It can be easily removed by brushing, keeping the floor tiles clean and brightening. >>>More
There are two options, one is with anti-slip fluid, and the other is with anti-slip tape. There are differences in the details between the two, but they both have one thing in common--- non-slip. Choose to use it on a case-by-case basis. Luoyang Jiadeli ground non-slip.
1. First of all, open the water tank of the toilet bowl and see what level the scoop inside the water tank is at when it is full. If the water inside is full and the tank is still flooding, then there must be a leak coming out. >>>More
<> used to make caulks or white cement for joint repair. But their shortcomings are all too obvious. After a long time, it will turn black and fall off. In particular, the grease stain in the kitchen will turn yellow. Greasy ones are hard to clean. >>>More
To judge the parallelism of the floor tile surface, you can put the front of the floor tile on the glass countertop, and press the four corners of the floor tile with your fingers, if the floor tile is uneven, the floor tile will shake. Or use a very thin nylon thread to pull the diagonal line of the floor tiles, and use visual inspection methods to see whether the line is close to the floor tiles, if there is a gap, it means that the floor tile surface is uneven. Check the floor tiles first, and at least 25 floor tiles should be checked. >>>More