If you have a child at home, what should you do if the floor tiles are non slip?

1. Simple anti-slip method of floor tiles.

It is to pay attention when mopping the floor, to mop wet and then dry, or to dry before walking, be sure to keep the floor tile surface dry, there is water or oil stains on the floor tile is easy to slip.

2. Professional anti-slip method for floor tiles.

There is a product called tile anti-slip agent, which is suitable for glazed tiles, full-body tiles, polished tiles, vitrified tiles, antique tiles, anti-slip tiles, mosaics and other stone floor tiles. Its principle of action is that the tile anti-slip agent can effectively penetrate into the pores of floor tiles and stones, dissolve a small amount of silicon, make the original capillary pores thicker, and form many small and invisible nano-level dents on the surface.

When the sole of the foot or sole passes through the ground, the water will be extruded from the capillary under pressure to make the capillary in a vacuum state, so that the contact with the sole of the foot can form a physical suction cup. The coefficient of friction on the ground is greatly enhanced. It reduces the risk of slipping and falling after the floor tiles are wet.

1. Brush the tile anti-slip liquid.

Tile anti-slip fluid is a chemical synthetic product, which can penetrate into the inside of the tile, form a pit on the surface of the tile, improve the anti-slip ability of the tile, and can be used in glazed tiles.

Vitrified tiles, polished tiles.

and other various tile surfaces. When applying anti-slip fluid, we need to clean the ground stains first, and then apply anti-slip liquid on the surface of the floor after it is clean and dry. Tile anti-slip fluid can have a better anti-slip effect on the ground with water.

2. Lay carpets.

The floor tiles are too slippery, we can lay carpet on its surface, and the carpet has friction.

Large, comfortable feet, good decoration and other advantages, the carpet on the floor tiles can avoid us from slipping when walking, but we need to clean and care for the carpet frequently.

3. Replace the tiles.

The floor tiles are relatively smooth and easy to fall, we can also remove the floor tiles and re-lay the floor tiles with good anti-slip effect, for example, we can lay the whole body tiles.

Tiles such as antique bricks. Although the replacement of tiles with good anti-slip effect can effectively solve the problem of slippery floor tiles, its cost is relatively high.

1. Full-body brick: The surface of this kind of floor tile is not glazed, and the front and back materials and colors are the same, which is a wear-resistant brick with many varieties. Nowadays, the interior design is more inclined to plain design, and the use of all-body bricks has gradually become a fashion, which is widely used in halls, aisles, outdoor walkways and other decoration floors.

Because the anti-slip effect of this floor tile is good, it is more suitable for ground decoration.

2. Vitrified brick: because polishing is wear-resistant, but this brick also has disadvantages, that is, it is easier to get dirty. To solve the problem of easy dirt of polished tiles, there are vitrified tiles now, which is the whole tile, the surface is smooth and does not need to be polished, there is no polishing porosity, and there is no dirt and dirt.

Vitrified tiles are reinforced polished tiles, which are fired at high temperatures and have a harder texture than polished tiles.

3. Mosaic bricks: Mosaic bricks are a kind of ceramic tiles with a relatively small volume, which is also commonly known as bricks. Mosaic is very nostalgic and retro, and has been used as a decorative material for floors and walls for many years.

There are many ways to combine mosaics, and they can also be combined into more abstract patterns in plane combinations, and the color shades are very ranked. The floor of the bathroom environment can be installed with mosaic tiles.

4. Facing brick: glazed brick is a kind of brick commonly used in decoration, with a rich color range and strong orientation ability, which is widely used in wall and ground decoration. The choice of glazed bricks in the ground tile is to take into account the anti-slip performance of the brick, if the installation of more slippery bricks, people walking on the ground, if not paying attention to it is easy to fall.

For the sake of people's safety, the glazed brick installation is more non-slip.

There are children and elderly people at home, and the kitchen and bathroom decoration should be tiled, what kind of tiles to choose, and what is the anti-slip effect?

At present, there is no relevant standard for tile slip resistance in China, and the international standard is more common from Germany, there are two main standards, DIN51130 and DIN51097.

DIN51130 is a shoe-wearing area, suitable for public activity areas such as stations, hotel lobbies, schools, kindergartens, hospitals, nursing homes, etc. It is divided into four levels: R9, R10, R11, and R12.

DIN51097 is a barefoot area, suitable for barefoot wet areas such as showers, swimming pools, etc. It is divided into three grades: A, B, C.

At present, the mainstream decoration materials kitchen and bathroom are generally made of ceramic tiles, and tiles have different anti-slip properties according to the material, and the overall analysis is as follows:

Professional anti-skid bricks, full-body bricks, mosaics, glazed tiles, vitrified bricks, polished tiles.

At present, the full-body bricks in the mainstream ceramic tiles can be used in any space of the family, basically meet the daily anti-slip needs, and can reach the R10-R11 standard. Specifically, the manufacturer can be required to issue a test report or test the slip resistance on site.

If there are special requirements, it is recommended to buy special swimming pool anti-slip bricks, the disadvantage is that it is more expensive; Some special processes, such as antique bricks, because they are specially treated on the glaze, have relatively large friction themselves, which is basically equivalent to special anti-skid bricks, and the cost is relatively acceptable, which is very suitable for use in kitchens, bathrooms and other key non-skid areas of the family.

If the tile has been paved, and then with the wear and tear of daily life, or worried about the elderly and children falling, you can also use a special tile anti-slip liquid to carry out anti-slip treatment on the tile surface, without replacing the tile, reducing the increase in costs caused by repeated decoration, which is also a recommended way.

There is a product called tile anti-slip agent, which is suitable for glazed tiles, full-body tiles, polished tiles, vitrified tiles, antique tiles, anti-slip tiles, mosaics and other stone floor tiles. My mother's home is an antique brick, born with anti-slip function, I feel that in the future to lay tiles or have to choose non-slip, save trouble, especially the old and young at home. The most important thing for the elderly and children is anti-slip and environmental protection, the choice of tiles should choose some tiles with good anti-slip performance, while the immunity of the elderly and children is worse than that of young middle-aged people, so it is necessary to choose healthy and environmentally friendly ceramic tile products, in addition to children, try to choose a little dirt-resistant.

Zhuoyuan brand has good performance in all aspects, focusing on green environmental protection, which can be considered.

Traditional anti-slip bricks are only made into uneven surfaces through physical methods to have anti-slip ability. If a large amount of water vapor or oil accumulates on the ground, its anti-slip ability will be greatly reduced.

The anti-slip effect of the new anti-slip brick is even higher, it adds corundum structure of alumina in the firing, so that the flat brick surface is cooled to form a uniform, fine dot-like concave and convex glaze, so that the friction will be greater, and the effect of better anti-slip is better.

If the family has the elderly and children, and needs non-slip, then you need to buy some non-slip tiles, so that you can.

You can choose to paste some anti-slip film, or lay some carpet on the floor tiles, which can play a non-slip role, and it is also more beautiful.

You can paste anti-slip mats, you can buy frosted floor tiles, or you can directly ask the company to do anti-slip treatment, which is more expensive.

Then buy non-slip floor tiles directly, there is no other way to prevent slip later.

Introduction: If you want to prevent slipping, you must take protective measures.

Many people have elderly people in their homes, at this time, if you want to make the floor tiles non-slip, then you must avoid some stains on it, some people in the process of cooking, there will inevitably be some stains on the ground, you have to clean it in time. If there are elderly people in the house who are dirty on the ground, they must be mopped with a mop in time, and they must be wiped again with a dry rag after mopping, so that they will have an anti-slip effect. Many people find that there is a lot of water on the ground after mopping, at this time you can use some absorbent mops, and then dilute the water on it, so that there will be no danger in the process of use.

If you want to achieve the effect of anti-slip, you can usually buy some non-slip slippers for the home, be sure to do a good job of protective measures, do not let the dangerous phenomenon occur in the home, usually when choosing tiles, you can also choose a better tile and then paste it.

There are many people who don't know how to choose a non-slip material when choosing a non-slip material, you can also use something good and you can also keep the floor dry, so that it can play a role in the method. Some people will have some laundry at home, if there is a lot of water on the floor after washing clothes, you can also adjust it appropriately to make it more convenient for yourself to use. If you don't know what kind of tile you should choose, then take a look at what kind of tile you need at home, and then choose, if there is water on the tile, you can also wipe it appropriately.

If there is no way to ensure the dryness of the tiles, you can make appropriate adjustments to some of your behaviors, and be sure to do a good job of protection in time, so that it will be better in the process of use, and it must have an anti-slip effect at ordinary times, so that it is not easy to make the ground produce a lot of water.

I have been engaged in decoration for more than ten years, and I may be able to give you a little advice.

To put it simply, compared with the commonly used glazed bricks and polished bricks, anti-slip bricks have the advantage of being non-slip, and the friction coefficient of the tile surface is relatively large, and it is usually used in balconies and bathrooms, because there is often water.

Non-slip bricks can also be paved in the room, can be imitation wood grain strip bricks, can be imitation stone antique bricks, full-body bricks, etc., out of a texture closer to wood, stone, the greater benefit is non-slip, non-reflective. The antique bricks of the whole body, compared with the polished bricks and glazed bricks, even if they are worn out after more than ten years, the bricks below it are still consistent with the color of the surface.

If you can accept a darker color, you can consider using it. Some antique bricks with a delicate surface are often used for wall decoration and floor paving in the room.

As for the disadvantage of non-slip bricks, it is more difficult to clean and sanitize. Because the surface texture is coarse (compared to polished glazed bricks), it is also easy to hide some fine dirt, and after a long time, it will look a little dirty, and it is not a light mopping that can be cleaned (some surface enamel is better, it is easier to clean, but compared to polished glazed tiles, it is still difficult to take care of).

Therefore, in addition to the consideration of color and texture preference, the biggest difference is that it is more difficult to do non-slip and hygiene. If the home is only lightly mopping, then polished bricks are more suitable for use, if you can usually insist on mopping the ground with mopping water every once in a while, it is okay to use antique bricks (except for bathrooms and balconies, because there is often water, it is easy to clean up with a broom).