How to disassemble and clean the wall mounted air conditioner filter, and how to remove and clean th

1.How to remove the air conditioner filter?

How to remove the air conditioner filter? Many users do not understand the process of disassembling the air conditioner filter. The following is a brief introduction to the disassembly process of the air conditioner filter. If you need it, take a quick look!

1.First of all, to be on the safe side, unplug the air conditioner first.

2.Before disassembling the cabin air filter, carefully open the cabin air conditioner case. Generally, there are two small card slots stuck on the air conditioner housing. Gently pull the outer cover outward.

3.After opening the outer cover of the air conditioner, there are often two buckles inside, which need to be opened gently to make the outer cover fully open. Then take the filter. The filter is easy to hold, but it gets stuck in a couple of slots. Start by pushing the filter upwards, then gently pull the filter down and take it out.

4.After removing the filter, some air conditioners will have black particles with enhanced filtration, which should be removed separately for cleaning and drying.

5.Then carefully rinse the strainer several times with clean water, brush it several times with a soft brush, and finally leave it to dry in a ventilated place until it is completely dry. Never bend the filter when cleaning. Although elastic, the plastic ones do not stand up to bending.

6.It's more troublesome than disassembling the filter. To install, insert the filter along the card slot. Be sure to keep an eye on the front and back. It is the back with a convex buckle.

7.Once the filter is fully inside, make sure the other side inside is stuck in the slot and doesn't fall off. Then, press the filter without arching, and finally, put the small buckle into the slot.

2.Can an air conditioner be left without a filter?

Many users will ask whether the air conditioner can be without a filter? First of all, let's introduce the question of whether the air conditioner can be without a filter. If you need it, take a quick look!

Of course it matters. Without a filter, dust will accumulate in the indoor unit.

First, it will affect ventilation and reduce the efficiency of air conditioning. In severe cases, it will lead to the leakage of the indoor unit and the shutdown of the compressor thermal protection.

Second, it will pollute indoor air and be harmful to the human body. Ordinary plastic mesh mainly plays the role of dust insulation.

In addition, the triangular filter is called a photocatalyst filter, which is added by the manufacturer. The main function is to purify the air, sterilize, deodorize, and prevent fouling. You can rinse it with water, dry it and put it in. The main features are as follows:

1.Air Purification Function:

It has the effect of formaldehyde, benzene, ammonia, sulfur dioxide, carbon monoxide, and nitrogen oxides, and plays a role in purifying harmful organic matter like health.

2.Sterilization function:

It has bactericidal effect on Escherichia coli, Staphylococcus aureus, etc. While sterilizing, it can also decompose harmful compounds released by dead bacteria.

3.Deodorization function:

Can deodorize cigarettes, toilets, garbage, animals.

6.Anti-fouling function:

Prevent oil, dust, etc. It also has the effect of preventing mildew, rust, flavon, rust and fading on the paint surface of the toilet bowl in the bathroom.

7.Purification function:

It has the function of purifying water pollution and organic harmful substances in water, and the surface is super hydrophilic, with the functions of anti-fogging, easy to wash and easy to dry.

1. Unplug the power supply. 2. Take out the filter screen of the air conditioner, which can be easily taken out by gently opening the front buckle. 3. If the dust accumulation on the filter screen is more serious, it needs to be soaked in water containing neutral detergent for 10 to 15 minutes.

4. Dry in a cool and ventilated place, and then insert the filter into the air conditioner, and the filter will be cleaned successfully. Related knowledge popularization: 1. The air conditioning filter should not be placed in a place with high temperature such as sunlight during the drying process, and should not be blown by a hair dryer.

Because the plastic around the filter is very fragile, if it is roasted at high temperature, it is easy to melt the plastic, and eventually the filter cannot be used normally. 2. The filter needs to be cleaned regularly. Because during the operation of the air conditioner, it will suck the dust and cotton wool in the air into the air conditioner.

The entry of these substances into the air conditioner will affect the operation of the air conditioner, so the filter acts as an interception. If the filter intercepts too much and clogs the filter, it will cause the air conditioner to be obstructed. The internal pressure of the air conditioner is too high, which will cause damage to the air conditioner and affect the service life of the air conditioner.

Summary. How to remove the hanging air conditioner filter at the top to clean Hello dear, 1First cut off the power supply, then remove the panel on the front of the air conditioner, and directly open it upwards, so that you will see two filters; 2.

Take out the filter, clean the filter with water or a vacuum cleaner, the water temperature should not exceed 40 degrees, wash with a hot damp cloth or neutral detergent, do not use dish soap and the like, and then wipe it with a dry cloth, you can also put it in a cool place for air drying, do not expose it to the sun, it should be that the filter screen is generally plastic, and it can not withstand the high temperature of the sun; 3.Rinse with clean water, do not wash the filter with insecticides or other chemical detergents. 4.

Install the clean filter back inside the air conditioner according to the first step, if there is dust or dirt in the air conditioner, wipe it clean in advance, so that the air conditioner will be refreshing and healthy. Hope it helps.

Hello, I have seen your question and am sorting out the answer, please wait a while How to remove the hanging air conditioner filter at the top and clean it Hello dear, 1First cut off the power supply, then remove the panel on the front of the air conditioner, and directly open it upwards, so that you will see two filters; 2.Take out the filter, clean the filter with water or a vacuum cleaner, the water temperature should not exceed 40 degrees, wash with a hot damp cloth or neutral detergent, do not use dish soap and the like, and then wipe it with a dry cloth, you can also put it in a cool place for air drying, do not expose it to the sun, it should be that the filter screen is generally plastic, and it can not withstand the high temperature of the sun; 3.

Rinse with clean water, do not wash the filter with insecticides or other chemical detergents. 4.Install the clean filter back inside the air conditioner according to the first step, if there is dust or dirt in the air conditioner, wipe it clean in advance, so that the air conditioner will be refreshing and healthy.

First carefully open the air conditioning shell, generally the air conditioning shell is stuck with two small card slots on the left and right sides, and gently pull the outer cover outward. It should be noted that there will be two buckles connected to the outer cover on the lower side of the air conditioner, and they must also be opened to make the outer cover fully open. The filter is relatively easy to remove, and it is only stuck by the card slot.

Push the filter up first, and after the lower end is out of the card slot, then gently pull the filter down.

Every time at the turn of summer and winter, the air conditioner will come in handy, before using the air conditioner in the season, be sure to clean the air conditioner's filter, otherwise the dust, insect corpses and other foreign objects inside will be bad for health. There are certain tricks for removing the wall-mounted air conditioner filter. First carefully open the air conditioning shell, generally the air conditioning shell is stuck with two small card slots on the left and right sides, and gently pull the outer cover outward.

It should be noted that there will be two buckles connected to the outer cover on the lower side of the air conditioner, and they must also be opened to make the outer cover fully open. The filter is relatively easy to remove, and it is only stuck by the card slot. Push the filter up first, and after the lower end is out of the card slot, then gently pull the filter down.

After removing the filter, some air conditioners have black particles that strengthen the filtration, which need to be removed separately for cleaning and drying. When cleaning, rinse the filter with clean water several times, then scrub it with a soft brush several times, and finally dry it in a ventilated place until it dries thoroughly. Be sure not to bend the filter when cleaning, although it is elastic, the plastic one can not withstand bending.

How to remove the hanging air conditioner filter at the top to clean your dear,!"Ordinary hanging machine to remove the filter screen cleaning steps: first unplug the plug, open the indoor unit panel, there are two recesses on both sides of the indoor unit, force out at the recess to open, and then lift the indoor unit panel upwards to a certain angle (about 60 °), you can fix it in this position, and then take out the filter, be careful when taking the filter, do not force the disassembly and washing not according to the disassembly order will cause damage to the air conditioner.

Open it, take it out, and wash it with cool water.

1.First, turn off the power to your air conditioner and unplug it to make sure it's safe.

2.Locate the location of the air conditioner filter. Usually, the filter of a wall-mounted air conditioner is located in front or on the side of the indoor unit.

3.Open the lid or door of the filter and remove the filter filter.

4.Use a soft-bristled brush or vacuum cleaner to gently remove dust and dirt from the filter. If there is a lot of dirt, you can rinse the strainer with clean water.

5.If the filter is very dirty or smelly, it can be cleaned with warm water and a mild detergent. Soak the strainer in warm water, add an appropriate amount of neutral detergent, scrub gently, and then rinse off with Zhaoye water.

6.Allow the strainer to dry and make sure it is completely dry before attaching it back.

7.Close the lid or door of the filter, plug it in, turn on the air conditioner, and check that the filter is installed correctly.

Notes:1Do not scrub the filter with a brush or hard object to avoid damaging the filter.

2.Do not clean the filter with hot water or chemical detergents to avoid deformation or damage to the filter.

3.Clean the filter at least once a month to ensure the proper functioning of the air conditioner and the air quality.

1.Turn off the power of the wall-mounted air conditioner, unplug the power plug, and wait for the capacitor inside the air conditioner to discharge.

2.Open the panel of the wall-mounted air conditioner and remove the filter.

3.Soak the strainer in clean water and gently brush it with a soft-bristled brush to remove dust and dirt from it.

4.Rinse the strainer with clean water until the water is clear.

5.Leave the filter dry and keep it out of the sun.

6.After cleaning, put the filter back into the wall-mounted air conditioner and close the panel.

7.Plug in the power plug, turn on the power supply of the head of the wall-mounted air conditioner, and check whether the air conditioner is working properly.

Notes:1When cleaning the filter, be sure to turn off the power to avoid electric shock accidents.

2.When cleaning the filter, do not use hard objects or brushes to over-brush to avoid damaging the filter.

3.When cleaning the filter, do not use chemicals to avoid damage to the filter.

4.After cleaning the filter, be sure to dry it, do not wipe it dry or blow dry, so as not to affect the filtration effect.