How to clean the water dispenser if it is moldy in summer

The method of cleaning is as follows:

Step 1: Unplug the power plug, remove the bucket, open the drain nozzle behind the water dispenser (usually a knob made of white plastic), and drain the remaining water. Then, turn on the hot and cold water switch to drain the water.

Step 3: Configure disinfectant water according to the instructions of decontamination effervescent tablets or disinfectant, introduce it into the water dispenser, fill the entire cavity with disinfectant water, and leave it for 10 to 15 minutes.

Step 4: Turn on all the switches of the water dispenser, including the sewage pipe and drinking water switch, and drain the disinfectant.

Step 5: Continuously rinse the entire cavity of the water dispenser with clean water (it is recommended to move the water dispenser to the bathroom to ensure sufficient water), turn on all switches to drain the flushing liquid.

Step 6: Put a glass of water and smell for chlorine. If so, put in the water until you can't smell any smell before you can drink it safely.

Experts recommend cleaning the water dispenser at least once every 2 months, and every month in the summer.

Disassemble the water dispenser, scrub the moldy part with 75% alcohol, or scrub it with thick soapy water, the water dispenser should be placed in a dry and ventilated place, and the shelf life of a bucket of water is generally hot days, especially at home for about 2 days. If you can't finish drinking, you can buy a small keg instead. It's burning.

Seek to use high temperature sterilization. Treat the symptoms but not the root cause.

You can use an appropriate amount of rice and water to remove mold spots from the bucket.

Operation steps: 1. Take 50 grams of rice and pour it into the bucket of the water dispenser.

2. Put an appropriate amount of water in the bucket.

3. Close the lid of the bucket and pay attention to the amount of water that can not exceed the rice in the bucket.

4. Hold the barrel tightly and shake the bucket of the water dispenser in all directions for a few minutes.

5. When you stop, you can see that the water and rice have knocked down the mold in the bucket, and the water has turned black and green.

6. Pour out the rice and water from the bucket.

7. Rinse the debris in the bucket with clean water.

8. The treated water dispenser barrel is restored to clean, and there is no mold.

1.Turn off the power to the water dispenser.

2.Wash parts such as surfaces and trays. Clean surfaces with mild dish soap, but not organic detergents, as this will corrode the surface of the water dispenser.

Alcohol cotton balls can be used for cleaning water inlets, inner walls, faucets, water trays, etc.; Insert the water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water tap and the blue cold water tap, turn off the tap until there is water out, and then hold the bottle with both hands and take it out upward.

3.Clean the outside of the water dispenser and the smart seat.

4.Pour an appropriate amount of special cleaning and disinfectant solution (see product packaging instructions) into the water storage tank.

5.After soaking for 10 minutes, turn on the red and blue faucets until the disinfectant is exhausted.

6.Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser.

7.Rinse several times with boiling or bottled water.

8.Tighten the drain valve, and the disinfection and sterilization operation procedures are completed.

The water dispenser will be like this after a long time, so it's better to find a special cleaning company to help you disinfect it

Method 1:

The bucket is not heavily limescale or moss.

1.Wash the bucket with clean water.

2.Dry or dry the bucket.

Method 2: Materials: high-pressure water gun, clean water.

1.One person holds a bucket.

2.A man with a high-pressure water cannon sprayed the inside of the bucket.

3.Pour water and let it dry.

Method 3: Ingredients: edible white vinegar and water.

1.Rinse the bucket with clean water first.

2.Put an appropriate amount of edible white vinegar into a bucket.

3.Invert and rotate the bucket without stopping.

4.Pour out after a few minutes.

5.Rinse off with clean water.

6.Allow to dry.

Method 4: Materials: special cleaning agent, water.

1.Rinse the bucket with clean water first.

2.Put the special detergent in the bucket.

3.Fill the bucket with clean water.

4.Placement for more than 12 hours.

5.Once soaked enough, pour out the water.

6.Rinse off with clean water.

7.Allow to dry.

Method 5: Ingredients: acidic substances (edible hydrochloric acid or citric acid), water 1Wash the bucket with clean water first.

2.Put the edible hydrochloric acid in a bucket of water.

3.Fill the bucket with clean water.

4.Placement for more than 15 hours.

5.After soaking, pour out the water in the bucket.

6.Rinse off with clean water.

7.Allow to dry.

Method 6: Ingredients: salt, water.

1.Rinse the bucket with clean water.

2.Put an appropriate amount of table salt into the bucket.

3.Fill the bucket with water, 4Let stand for 3-4 hours.

5.Pour out the salt water.

6.Rinse with clean water two or three times.

7.Allow to dry.

Method 1: The bucket does not have serious limescale or moss.

1.Wash the bucket with clean water.

2.Dry or dry the bucket.

Method 2: Materials: high-pressure water gun, clean water.

1.One person holds a bucket.

2.A man with a high-pressure water cannon sprayed the inside of the bucket.

3.Pour water and let it dry.

Method 3: Ingredients: edible white vinegar and water.

1.Rinse the bucket with clean water first.

2.Put an appropriate amount of edible white vinegar into a bucket.

3.Invert and rotate the bucket without stopping.

4.Pour out after a few minutes.

5.Rinse off with clean water.

6.Allow to dry.

Method 4: Materials: special cleaning agent, water.

1.Rinse the bucket with clean water first.

2.Put the special detergent in the bucket.

3.Fill the bucket with clean water.

4.Placement for more than 12 hours.

5.Once soaked enough, pour out the water.

6.Rinse off with clean water.

7.Allow to dry.

Method 5: Materials: acidic substances (edible hydrochloric acid or citric acid), water.

1.Wash the bucket with clean water first.

2.Put the edible hydrochloric acid in a bucket of water.

3.Fill the bucket with clean water.

4.Placement for more than 15 hours.

5.After soaking, pour out the water in the bucket.

6.Rinse off with clean water.

7.Allow to dry.

Method 6: Ingredients: salt, water.

1.Rinse the bucket with clean water.

2.Put an appropriate amount of table salt into the bucket.

3.Fill the bucket with water, 4Let stand for 3-4 hours.

5.Pour out the salt water.

6.Rinse with clean water two or three times.

7.Allow to dry.

The water dispenser is an indispensable household appliance in the current generation of pure families, but due to long-term use and improper maintenance, the water tank of the water dispenser will produce scale, bacteria, mold and other dirt, resulting in moldy water dispenser water. What should I do in this case?

The treatment method of water dispenser water mold is as follows:

1.Clean the inside of the water tank.

First of all, you need to cut off the power supply, pour out the water in the water tank, then rinse the water tank thoroughly with clean water, use a soft brush or sponge to clean the inside of the water tank, and you can clean it with a neutral detergent. Of course, it can also be cleaned with the help of a professional cleaning agent.

2.Disinfect the water tank.

After the tank is cleaned, it needs to be disinfected. You can use a professional disinfectant, or you can dilute the white vinegar and pour it into a water tank and soak it for several hours. After disinfection, rinse thoroughly with clean water.

3.Replace the water source.

If the same water source is used for a long time, the dirt and bacteria in the tank will accumulate quickly, so it is recommended to change the water source. There are various water purifiers, water filters and other products on the market, choose the water purification products that are suitable for your family, and replace the filter element regularly to ensure the safety of drinking water.

4.Regular maintenance.

The water dispenser also needs to be maintained regularly during daily use, such as cleaning the surface of the device, replacing the filter regularly, and reducing the generation of scale and bacteria, so that the water dispenser can always be in the best working condition.

In short, mold water in water dispensers is a very common phenomenon, but as long as it is cleaned, disinfected and maintained regularly, bacteria and mold can be eliminated, the inside of the water dispenser can be kept clean, and the healthy drinking water of the family can be guaranteed.

Water dispensers are household appliances that we often use in our daily life, and once a problem occurs, it will directly affect the quality of our drinking water and pose a serious threat to our health. Among them, mold in water dispensers is a more common problem, so what are the causes of mold in water dispensers? Let's take a closer look.

Wang Cong. 1.The water dispenser is not cleaned thoroughly.

After the water dispenser is used regularly, it is easy to accumulate some limescale and dirt. If it is not cleaned thoroughly, it will provide a breeding ground for bacteria and mold, which will promote the appearance of mold in the water dispenser.

2.Water problems.

The water source of the water dispenser is also an important factor affecting food safety. If the water source is polluted or the water quality is not up to standard, the water in the water dispenser will also be contaminated, which will lead to mold in the water dispenser.

3.The water dispenser is stored in too humid environment.

Storing water dispensers in some humid environments, or not draining the internal moisture in time when the weather is humid, will promote the reproduction of mold and bacteria inside the water dispenser, and eventually lead to problems such as mold and electricity leakage.

4.The service life of the water dispenser is too long.

If the service life of the water dispenser is too long or the accessories such as multiple filters and ultraviolet lamps are not replaced regularly, it will also make the water dispenser prone to fouling and bacterial growth, resulting in mold in the water dispenser.

To sum up, there are many reasons for the mold of water dispensers, and we need to start from many aspects, use water dispensers more scientifically, and regularly disinfect and clean water dispensers to ensure the quality and safety of drinking water. At the same time, it is also necessary to reduce fiddling when using the water dispenser daily, and do not put the cup on the water dispenser's water outlet to avoid invading bacteria.

The water dispenser bucket is a drinking tool that we use every day, but because it is placed all year round, it is easy to be attacked by bacteria and produce mold. This not only affects the hygiene of drinking water, but also our health. Therefore, we need to clean and deal with the problem of mold in the water dispenser barrel in time.

Step 1: Clean the water dispenser bucket.

First of all, we need to pour out the water in the water dispenser bucket and then take the water dispenser apart. The steps of disassembling the water dispenser will be different according to different types of water dispensers, and we can disassemble the water dispenser according to the instruction manual of the water dispenser. In general, disassembling a water dispenser requires removing the filter and sink, and then cleaning every part of the interior and exterior with detergent and a brush.

Step 2: Disinfect the water dispenser bucket.

After the cleaning process is completed, we need to disinfect the water dispenser barrel, and the following methods can be used:

1. Disinfect with vinegar. We can use vinegar to disinfect the drinking bucket, add vinegar and water to make disinfectant, and then pour the disinfectant into the drinking bucket, let it stand for 20-30 minutes, and rinse it with water repeatedly.

2. Use a special filial piety bridge disinfectant. There are many disinfectants on the market that are specifically for disinfection of water dispensers, and we can choose the right disinfectant according to our own water dispenser instructions, and use it according to the instructions.

Step 3: Pay attention to the details of the use of the water dispenser.

In addition to regularly cleaning and disinfecting the water dispenser barrel, we also need to pay attention to the following details:

1. Replace the filter element in time. The filter element is the filter inside the water dispenser, which will produce harmful substances such as bacteria and viruses after long-term use, and we need to replace the filter element regularly to ensure the hygiene of drinking water.

2. Clean the water dispenser sink regularly. The sink is the water storage area of the water dispenser, and it is easy to breed bacteria and viruses if it is not cleaned for a long time, so we need to clean the sink regularly to ensure the hygiene of drinking water.

3. Keep indoor air circulation. Poor indoor ventilation can easily cause dampness inside the water dispenser barrel, which can cause mildew and bacteria, and we need to keep indoor air circulation to reduce air humidity and the possibility of bacteria multiplication.

In summary, cleaning and disinfecting water dispenser barrels can effectively prevent drinking water from being attacked by bacteria and protect our health. At the same time, we also need to pay attention to the details of the use of the water dispenser so that it can function better.

Mold water dispenser barrels are a very common problem because if they are not cleaned and disinfected frequently, it is easy to accumulate limescale and bacteria, and in a humid environment, it is easy to breed mold. When users find that the bucket of the water dispenser is moldy, the first thing they need to do is to clean and disinfect it.

Here's how to deal with moldy water dispenser barrels::

1.Clean the water dispenser bucket: First of all, you need to pour out all the water in the bucket, and then use soapy water to clean it, preferably with a special detergent or disinfectant solution, and thoroughly remove impurities and stains in the bucket.

2.Disinfect the water dispenser bucket: After cleaning, it needs to be disinfected with disinfectant or bleach.

The disinfectant is a kind of fungicide, which has the effect of quickly killing mold and bacteria, but it needs to be soaked in the disinfectant after the release of the dilute trembling front, adding water according to the ratio on the instructions, and soaking the bucket for at least 30 minutes.

3.Regular cleaning and disinfection: In addition to the treatment after the water dispenser barrel is found to be moldy, it is usually necessary to clean and disinfect it regularly, and disinfect and clean it every three to six months, and the specific time needs to be determined according to the use of the product.

4.Keep it dry: During use, you need to ensure air circulation and do not leave the barrel in a humid environment for a long time, thus reducing the chance of mold.

In conclusion, regular cleaning and disinfection is the fundamental solution to the mold of the water dispenser barrel, while maintaining a dry environment is also very important. With proper cleaning and maintenance, we can effectively protect our own health and the health of our families, while prolonging the life of our water dispensers.