How do I wash off the stains on the new tiles?

Daily cleaning of ceramic tiles can be carried out with dish soap, soap, etc.

Cleaning the tiles with a mixture of soap and a little ammonia and turpentine can make the tiles more shiny.

Polished tiles should be waxed regularly, and the time interval should be 2-3 months.

If there are scratches on the brick surface, you can apply toothpaste to the scratches and wipe them with a dry cloth to repair them.

The cracks of brick B can be removed from time to time with detergent, and then a layer of waterproof agent can be brushed on the gaps to prevent the growth of mold.

Sodium hydroxide or potassium bicarbonate solutions can be used to remove contaminants such as tea, coffee, beer, ice cream, grease and grease.

To remove ink, cement and other contaminants, dilution solutions such as hydrochloric acid and nitric acid can be used.

Special cleaners can be used to remove contaminants such as paints and coatings.

To remove rust, you can wash it with an oxalic acid solution of 2 and then wipe it off with clean water. If it is rust stains, you can use 10 oxalic acid, citric acid and water mixture to soak the rust area, and then wipe it with concentrated salt water.

To remove all kinds of gum you can use banana water. Pure banana water is a colorless, transparent and volatile liquid, with a strong banana odor, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as a solvent and thinner for painting.

Mercury can be scrubbed clean with gasoline or with a stain remover cream.

1. Tea water, coffee, beer, iodine wine, ink, pencil, soy sauce, vinegar do not need detergent, and the tiles can be cleaned with water and rags.

2. Clean tiles with sodium hydroxide and potassium bicarbonate solution for vegetable oil, beer, coffee and ice cream.

3. Sediment, ink, strong tea, rubber with dilute hydrochloric acid, nitric acid, oxalic acid, sulfuric acid to clean tiles 4, paint, drawing pen liquid with turpentine, trichloroethylene, pyruvate or alkali, benzene or lipid organic matter coated on the pollutant, fully react for 5 minutes, wipe dry with a dry rag, repeat many times, and finally rinse with water.

5. Clean tiles with coke and vinegar with acid or alkali solution.

6. Cement slurry, lime slurry, and all kinds of metal rust should be wiped with a rag dipped in detergent, and then cleaned with water.

2. Special all-round water cleaning Daily cleaning can be done with household detergents or detergents.

A few tips.

1) Raising porcelain After the polished tiles are paved, you can walk on them one day, and after a week, the cement is basically hardened, and you can live and live.

2) Cleaning: The polished bricks should be cleaned with a dry tray as much as possible, and the porcelain tiles can be cleaned with wet mopping 3) After the polishing bricks are paved, they will be waxed again, and then waxed regularly.

4) Treatment of scratches: You can apply a little toothpaste to the scratches of the tiles and wipe them with a soft cloth to remove the scratches.

5) It is forbidden to use strong acids such as hydrofluoric acid to scrub to prevent the tiles from being corroded.

Yipai tile will answer for you!

1. Floor tile cleaner. Some tiles have not been laid for a long time, and there are stains, for this kind of problem, you can use floor tile cleaner to remove the stains, the effect is very good, and this floor tile cleaner is one of the most commonly used methods by people.

2. Wipe with a dry cloth. For general stains, you only need to wipe it with a dry cloth, and it will be brighter and brighter, and for ink, coffee and other stains, you can use laundry detergent and dish soap to clean, and then wipe it with a dry cloth, and the effect is also very good.

3. Mop wipe. If you wipe with a mop, first make sure that the mop has wiped the sanded floor, because the stain will be difficult to remove once it is stained with wax, otherwise it will be treated with a professional cleaner. Therefore, this tile cleaning method should also be paid attention to.

4. Detergent. You can use a professional decontamination ear to do a guess destruction paste to remove stains, this kind of decontamination paste has a good effect on scale, black scale, and rust, you might as well try it.

The above is the method of removing stains on the tiles after decoration, and those who need it can learn about it.

Tile stains can be removed in the following ways:

1. Dish soap, soap, etc. can be used for daily cleaning of ceramic tiles. Cleaning tiles with a mixture of soap and a little ammonia and turpentine can make the tiles cleaner and brighter.

2. Pollutants such as tea, coffee, beer, ice cream, grease and other pollutants attached to the surface of the tile should be scrubbed in time, and sodium hydroxide or potassium bicarbonate solution can be used to decontaminate if necessary. Ink, cement and other pollutants can use hydrochloric acid, nitric acid dilute solution, while paint, paint and other pollutants use special detergents.

3. If there is a slight scratch on the brick surface, you can apply toothpaste to the scratch, and then wipe it with a soft dry cloth to repair it. If the damage is serious, it should be replaced in time or repaired by a professional to avoid personal injury. The gaps between the bricks can be cleaned with stain remover from time to time, and then brush a layer of waterproofing agent on the gaps with a brush to prevent mold growth.

Daily maintenance of light-colored tiles:

When cleaning and maintaining vitrified tiles daily, all stains on the floor tiles should be thoroughly cleaned first, and if there is glue or sticky stains, you can wipe them off with a neutral detergent and a 3m scouring pad. Splash the floor cleaner (please use it according to the instructions) on the floor tiles, and use a waxing machine to rub the stains on the floor tiles clean.

Then pour the water-based wax onto a clean dry mop and spread the wax evenly on the floor tiles. After waxing, let the surface of the floor tiles dry by itself, and then you can step on it after drying, or you can use an electric fan to assist in drying, generally 8 hours after waxing will be completely dry, if there is a heavy object to move, you must wait for the wax to be completely dry before moving, so that you can keep the light of the floor tiles.

To clean paint marks on tiles, you need to prepare: paper towels, disinfectant.

1. First find the traces of paint on the tiles.

2. Next, spread a paper towel on top of the paint marks of the tile.

3. Then pour an appropriate amount of disinfectant on the paper towel.

4. It is necessary to pay attention to completely soak the disinfectant in the paper towel.

5. Wait until the disinfectant on the paper towel is dry, and then tear off the paper towel.

6. Finally, the paint traces on the tiles are removed.

Summary. Dear, here's how to fix 1First, wipe the tiles with warm water and dish soap, and if the stain persists, use a small rag and a little alkaline detergent to wipe it; 2.

If the stain is difficult to remove, you can mix coarse salt and vinegar into a paste, apply it to the surface, and then wash it with water after the stain is removed. 3.When the stain is not completely removed, you can use lime powder and water to mix into a paste, apply it to the surface, and then wash it with water after the stain is removed.

4.If you still can't remove it, you can use abrasive powder or sandpaper to wipe it, but be careful not to wipe it too hard to avoid damaging the tiles.

Newly laid tiles, there are stains one by one, how to remove.

Dear, here's how to fix 1First, wipe the tiles with warm water and dish soap, and if the stain persists, use a small rag and a little alkaline detergent to wipe it; 2.If the stain is difficult to remove, you can mix coarse salt and vinegar into a paste, apply it to the surface, and then wash it with water after the stain is removed.

3.When the stain is not completely removed, you can use lime powder and water to mix it into a paste, which wax is applied to the surface, and then wash it with water after the stain is removed. 4.

If the crack still can't be removed, you can use abrasive powder or sandpaper to wipe it, but pay attention to the wiping force should not be too large, so as not to damage the tile.

Newly paved, sprinkled with milk stains, and others, one by one on the ground, no longer shiny, and they can't be wiped off, just like spots.

Kiss, this is because the newly paved porcelain staring bright bricks have not been exposed to water, have not been cleaned, the surface of the tile will absorb dust, dirt, oil, and form spots. To scrub these spots, it is best to use a special detergent, such as a tile cleaner, to help remove dust, dirt, oil, etc., to achieve a cleaning effect.

Once diluted with an acid solution and rubbed, there was a piece of fogging, not bright.

Is there any good way, dear, you can try to clean it with ointment or bleaching powder, if it doesn't work, you can try to scrub it with scrub to restore the original luster of the tile.

One: Use toilet paper to "apply" the tiles

Stick toilet paper or paper towels on the tiles, spray detergent on them and leave them for a while, just like a feminine compress, not only will the detergent not drip everywhere, but the grease will all stick up. Just tear off the toilet paper and wipe it with a clean rag dipped in water 1 or 2 times, and the tiles will look brand new. For tile tiles with heavy oil stains, you can stick toilet paper or paper towels on the tiles overnight, or replace toilet paper with cotton cloth, and wait for the oil stains to be fully absorbed by the paper towel, and then wipe them with a damp rag.

This method can also be used for ventilation fans on the inside of the range hood.

Two: Clean the tiles with a toothbrush

In fact, insisting on simple oil control cleaning every day can reduce the workload and reduce the difficulty of the work. Because, in this way, the oil stain area is relatively small, and the degree is shallow, which is easier to clean. In the daily small area of oil stains, you can skillfully use an old toothbrush to clean up, which is not only clean, but also labor-saving.

In addition, if you are in a difficult place to clean, such as tile joints, you can also use an old toothbrush, because the toothbrush has relatively small teeth, so you can go deep into the crevices for deep cleaning.

Three: Shovel steel wool ball cleaning

If the oil stain on the tile or the gap is really thick, first use a shovel to shovel it, or use a steel wool ball to clean it first, and after thinning, you can use acidic or dissolved detergents to clean.

Four: Candle to clean the joints of the tiles

Gently apply the candle to the joints of the tiles, first vertically, so that the candles can be evenly applied to the joints; Then apply it horizontally, so that the thickness of the tile is equal to the thickness of the candle. The purpose of applying candles is because the surface of the candle is smooth, and even if it is stained with oil, it will be clean with a light wipe of the candle.