-
The reasons why a flush toilet leaks are as follows:1. The rubber ball valve is broken: once the rubber ball valve is broken, the sealing of the entire water tank is not good, just like there is a hole in the wooden barrel, so the water will continue to flow out.
2. Aging of the rubber gasket of the mixing port: After long-term use, the rubber gasket will become thinner and thinner, and eventually it will be completely aged.
3. The link between the floating ball and the water inlet switch is loose: open the toilet tank, we can see a small ball floating on the water surface, and the small ball is connected to the water inlet with a water pipe, check whether the connection between the two is tight, if it is loose, just tighten the connection.
4. The water tank is damaged by external force: the water tank may be damaged by external force, resulting in water leakage.
-
Many friends use the equipment in this bathroom for some time, and there will be many kinds of problems, such as thisFlush toilet leaksThe love of the spine seepage always loves to happen, that file let this flush toilet leak, friends will not only affect the use of inconvenience, but also will lead to a bad mood, our flush toilet leakage is there any solution? You don't have to rush to read our following article carefully.
1. Causes of leaking toilets.
1. If the toilet at home has a leaking water tank, it is necessary to check whether it is caused by the poor material of the water tank or the old internal parts of the water tank. Because there are many types of toilet brands on the market now, and there are many small manufacturers in order to get more benefits, the production is not good material flush toilets, generally not visible on the surface, but not used for a long time, there will be a variety of problems.
2. Of course, there is another reason, which cannot be ruled out because the toilet has been used for a long time and has naturally aged and deteriorated. So at this time, you can split the toilet tank, pay attention to whether the parts are in good condition, if the parts are broken, you can buy a new one and replace it.
3. The problem of leaking toilet tank is due to the sewer pipe underneath. For the sewer pipe, it is necessary to carefully check whether the interface between the toilet and the sewer pipe is loose, or whether the sewer pipe is rotten, if the sewer pipe is rotten, the sewer pipe must be replaced, and if there is a leak because it is not connected, find some wire or something like that to stabilize the interface between the toilet and the sewer pipe.
Second, the solution to the leakage of the flush toilet.
1. Take out the water-stop cover of the dew part and check whether it is deformed, aged or adhered to foreign bodies; Just clean or replace the lid of the water.
2. Use a screwdriver to remove the broken special-shaped nut; Replace the new shaped nut and tighten it (the overflow pipe should be placed flat when it is placed in the ceramic mounting port).
3. Drain the water in the water tank to the bottom of the downspout; Add the dark solution to the remaining water and observe for any leaks at the flush port. If there is a crack, there are cracks in the body of the real porcelain; If not, the triangle valve opens slowly. When the water is placed at the level of the surface of the body, if it is not out of the water, it is done.
4. Frequent cleaning of the water inlet valve can also reduce the occurrence of more than just water. Remove the water inlet pipe from the bottom of the toilet, and then remove the plastic nut at the bottom of the water inlet valve, and remove any filters and other things. Finally, the inlet valve can be taken out of the tank.
5. We remove the water supply pipe of the water inlet valve, then pick up the plastic cover, take away the water drifting connecting rod, and then hold it up and down in the opposite direction and twist it hard, and take out the leather pad at the thimble inside, clean it, and put it back again.
The content of the above article is what are some of the reasons for the leakage of the flush toilet, so friends should pay attention to protection after understanding what is going on with a flush toilet leakage, and we can refer to the solution to the leakage of the flush toilet.
Toilet leakage maintenance method: the water tank is leaking, and the water inlet group or outlet group needs to be repaired or replaced; The bottom of the toilet is leaking and needs to be resealed; If there is water seepage on the surface of the toilet, the toilet needs to be replaced. >>>More
1.First, use a knife to cut the glass glue at the junction between the toilet bowl and the floor tiles, and then unscrew the bolts that hold the toilet open. >>>More
First, the flushing method.
Nowadays, most toilets on the market are siphoned, which is easy to flush off the swag that adheres to the surface of the toilet. The disadvantage is that it is water-consuming and easy to block. It is not easy to clog directly and is easy to smell when it is disadvantaged. >>>More
The toilet works as follows:1. When you press the button, you pull the chain inside the toilet, so you can open the flush valve. >>>More
Caused by installation errors or broken flanges. >>>More