What is the reason why the toilet does not flush and what is the reason why the flushing toilet does

First of all, check that the automatic toilet has enough power.

There are two solutions to automatic toilet not flushing. One is to restart: the automatic toilet does not flush because the toilet is not full of power, or the plug is loose, you may wish to restart it to see if the situation has improved.

The second is to ask the manufacturer to carry out professional after-sales treatment, after all, the structure of the automatic toilet is much more complex than the ordinary toilet, and there are many reasons why the toilet does not flush, such as key failure, chip failure, etc., if you deal with it without authorization, it may be self-defeating and make the situation worse. First see if the power of the smart toilet is sufficient, if the power is normal, you can restart it, otherwise it is recommended to find the manufacturer's after-sales service to deal with it, because the structure of the smart toilet is more complex, and there are many reasons for the failure of the automatic flushing of the toilet, such as key failure, chip failure, water tank blockage, etc., disassembly and assembly at will, easy to self-defeating.

1. Check whether the filter is clean.

Many people may not know that the toilet does not flush and may be the cause of the problem with the drainage. In fact, a better toilet bowl has a filter inside. We can take this toilet apart and look at its filter, if the filter will be used for a long time there will be too much limescale, or some debris, then tap water can not enter the tank.

This will result in a situation where the water does not flush. So we just need to remove the strainer and clean it.

2. Check the water inlet valve and outlet valve.

Toilet flushing should first be fed into the tank, and the water should be discharged through the outlet pipe. Therefore, checking these two parts is very effective in solving the problem of toilet not flushing. Therefore, we should check these two parts of our life regularly.

At the same time, we can also check whether the internal components of the toilet are complete and whether the valve is installed correctly.

3. Whether the ball valve of the water tank is in good condition.

Sometimes there may be a problem with the ball valve in the water tank, in the face of such a situation, we must first cover the toilet lid, and then check whether the toilet inlet valve and button position are the same as if close. If the position of the button and the inlet valve do not correspond, then the button will not be able to touch the switch of the inlet valve, and the water cannot be flushed. We just need to make one adjustment of the two positions so that they are next to each other.

In this way, the switch of the inlet valve can be activated to start the entire flushing operation.

4. Check whether the float is damaged.

Beside that, what to do if the toilet doesn't flush? There are other reasons, open the toilet lid to check whether the float sinks to the bottom when the tank is empty, if it is still above when there is no water, it means that the float is broken. In this case, we only need to replace the float inside the toilet bowl, so that the float bucket or float of the inlet valve will not move up and down freely.

5. Whether the water parts inside the toilet are damaged.

Of course, in addition to the toilet being blocked, the toilet does not flush may be the damage to the water inside the toilet, which will also lead to damage to the toilet pumping. Whether the sewer pipe is consistent with the hole of the toilet also affects the pumping of the toilet.

What should I do if the toilet doesn't flush? If the toilet bowl is constantly having problems, why not try replacing it with a new one at a time! For example, the CT2070 ordinary toilet of Emperor Sanitary Ware, the design of the classic PP European all-inclusive cover, has no sanitary dead ends, and is easy to clean.

And the way of flushing and sewage is adopted, which has obvious water-saving effect and is not easy to block. Wall-mounted design, supporting hidden water tank installation, simple and generous appearance.

The fundamental reason why the toilet does not flush is because the float in the toilet tank and its drain button cannot work normally, disassemble the two things, and then check the overall lifting function of the water.

The reason why the toilet does not flush is that there is no water in the toilet, or there is no water in the tank, or the switch is broken.

The toilet not flushing is not the problem of the toilet, it turns out that this thing is playing tricks, and the problem has been found.

1. Open the main valve of the toilet, that is, the angle valve, and see if there is no water.

2. Open the lid of the water tank, to see what causes the water tank not to water, first see whether the piston can be plugged, if it can't be plugged, the water tank will leak, the switch is not enough, so the water tank accessories of the toilet are divided into three parts. The drain valve is directly below the button, and the second is the water inlet valve, which is the part of the hose that connects to the outside of the water tank, which is generally next to the drain valve. The third part is the button, which is divided into a full row of buttons and a half row of buttons.

3. Check whether the flush button has reached the water inlet valve, and if it does, readjust the position of the water valve. It is also important to see if the float or float of the inlet valve can move up and down freely. If you get stuck, the water won't get in.

Generally, there are adjustable crosseyes on the pontoons, and you can twist them in a clockwise direction to see. If the float is suspended in the air when there is no water, it means that it is broken and the water inlet is blocked.

4. See if the pontoons in the tank can move freely, if it is free to move, then the water ingress problem will be solved. It's just that there was a problem with drainage. See if the plug of the plug tank is also called the float is damaged, and whether the connection between the float and the button is loose, and if it is loose, it can be tightened.

5. Check whether the button is elastic. It is easy to rust when the spring enters the water for a long time. The working principle of the toilet is nothing more than pumping--- storing water --- releasing water. Just a few things step by step.

The toilet is a must-have sanitary ware in our daily life, which not only makes the bathroom clean and hygienic, but also makes the bathroom more beautiful. However, after the toilet has been used for a long time, it will also encounter the situation that the toilet does not flush, which is annoying. So what to do if the toilet doesn't flush?

First of all, there may be too much scale and debris on the filter screen, so it is recommended to clean the filter directly; Secondly, it may be that the inlet valve and outlet valve are installed incorrectly, and it is recommended to check and reinstall; Finally, it may be that the position of the inlet valve and button of the toilet is not the same, and it is recommended to make an adjustment of the two positions so that they are next to each other.

How to maintain the toilet:

1. There are many bacteria in the toilet seat, so it should be cleaned emphatically.

According to relevant data, the virus on the toilet seat is no less than that on the toilet, and they can live up to 17 days, especially in winter, many families like to put cloth pads on the toilet, which is more likely to be stained with pollutants, so it is necessary to wash and dry frequently.

2. Clean the dirt in the toilet bowl in time.

The toilet bowl is easy to be stained with daily excrement, even if it is flushed, it will still leave a little trace, at this time it is best to use a toilet brush to add some detergent to scrub, pay attention to the toilet seat when cleaning.

3. Try not to set up a waste paper basket next to the toilet.

I believe that many families will put a waste paper bucket next to the toilet, it is recommended that it is best not to do this, because these paper buckets are not poured every day, it is easy to breed many bacteria, so it is recommended to just throw the toilet paper directly into the toilet and flush it away, if you have to put a paper bucket next to the toilet, it is recommended to choose a waste paper bucket with a lid.

4. The toilet brush should be kept clean and dry.

The toilet bowl should be kept dry at all times, especially the brush used to clean the toilet bowl is more clean and dry. Otherwise, it is easy to breed bacteria.

Summary: The above is the relevant content of what to do if the toilet does not flush and how to maintain the toilet, hoping to help friends in need. If you need to know more about relevant knowledge in the future, please pay attention to Qeeka Home information.

If the toilet bowl is not flushing, you can try the following methods to troubleshoot and fix it:

Check the water source**: First confirm whether the water source** is normal and check whether the water valve is open. Make sure the water supply lines are clear and there are no interruptions in the water supply or other issues.

Check the inside of the tank: Open the toilet tank lid and check the inside of the tank. Make sure there is enough water in the tank. If there is no water in the tank, it may be caused by a closed water valve or a malfunctioning water valve.

Check the flush button: Press the flush button and observe if any water is flowing into the toilet. If no water is flowing into the toilet, it may be a faulty flush button or a problem with the mechanical connection to the flush.

Clean the flush hole: Sometimes the flush hole can be blocked by dirt or blockages, causing the water to not flush properly. Use a needle or small tool to clean the flush hole to ensure that the water flows smoothly into the toilet.

Check the flush valve: Check that the flush valve is working properly. Some toilet flush valves are removable, and you can remove them for cleaning or replacement. If the flush valve is damaged or worn, it may need to be replaced with a new one.

1. If it is caused by the sewer, you can use a leather pistol to deal with it in time, and the toilet can be flushed slowly. 2. When the filter is blocked by a foreign object, the toilet cannot be flushed, and it should be cleaned immediately. 3. There may be a problem with the water tank, you should open the lid of the box in time to check the mold and adjust the water level inside.

When using it daily, be sure to close the toilet seat, otherwise the cyclone inside will fly into the air, causing odors in the bathroom. If the toilet lid is not properly closed, the odor will drift to the toiletries, which is not conducive to people's use.

The toilet cannot be flushed normally is one of the problems we often encounter in life, usually we need to find out the problem in time, and carry out corresponding repairs. Here are some of the reasons why your toilet may not flush properly

1.Faulty flush valve. If the toilet flushes but the flow is too low, the flush valve may be faulty. Generally speaking, the aging or wear of the flush valve chip can cause the water flow to become poor.

2.There is a foreign object in the water inlet of the tank. When using the toilet on a daily basis, if a large amount of dirt is flushed into the inside of the tank through the water inlet, it may affect the effect of the next flush. At this point, you need to carefully clean the inside of the toilet bowl to ensure that the inside of the tank is free of any contamination.

3.There is no water in the toilet tank. If the toilet does not have enough water, it will not be able to flush normally, at this time you need to check whether the water level of the water tank is enough to the standard crack and demolition water level, if the water level is insufficient, adding enough water can solve the problem.

4.Punching blockage. Even if there is enough water in the toilet tank, if the flush hole is clogged with foreign or dirt, it will not be possible to flush properly. At this time, a special toilet unclog can be used to solve the problem.

5.The water pipe is faulty. If the toilet bowl does not flush properly, it is possible that the water pipe is faulty. For example, the accumulation of limescale in the drainage pipes, the lack of water due to the blockage of dirt, and the rupture of the water pipes.

When we encounter a situation where we cannot flush properly, we should check and eliminate the problem in time. Usually, the toilet bowl does not flush properly due to problems such as foreign objects at the water inlet of the tank, no water in the tank, clogged flushes, and malfunctioning water pipes. If necessary, you can contact a professional for repair processing.