Why does the toilet suddenly start leaking?

Toilet. It's in every one of our homes. But how to solve the toilet leakage?

This is a problem that plagues many families. Every time I find a maintenance master to repair it, it takes less than 15 minutes, and the maintenance master can fix it. But you have to pay a hefty toilet repair cost.

Today, I will talk to you about the repair method of toilet leakage. Let everyone do it themselves to fix the toilet leakage. No more worrying about the cost of repairing a leaking toilet.

Let's learn together.

1. The cause of toilet leakage

1. Inferior material:Some manufacturers blindly reduce production costs and choose inferior materials to cause water inlet valve outlets and water inlet pipes.

The injection itself cracked, resulting in a seal failure, and the water in the tank flowed into the toilet through the drain valve overflow pipe.

Causing a "long flowing water".

2. Excessive pursuit of miniaturization of water tank accessoriesAs a result, the buoyancy of the float (or floating bucket) is not enough, and when the water submerges the float (or floating bucket), the inlet valve still cannot be closed, so that the water continues to flow into the water tank, and finally flows into the toilet from the overflow pipe to cause water leakage. This phenomenon is especially noticeable when the tap water pressure is high.

3. Improper design:The mechanism of the water tank accessories interferes with the operation and leads to water leakage. For example, when the water tank is discharged, the float and the float rod will affect the normal reset of the flap and cause water leakage.

In addition, the float rod is too long, and the float is too large, which causes friction between the water tank wall, affects the free lifting of the float, and leads to seal failure and water leakage.

4. The connections of the drain valve are not tightly sealed. Due to the loose sealing of the joint, the water of the non-disposable formed drain valve flows into the toilet through the overflow pipe through the interface gap under the action of water pressure, resulting in water leakage. Lift-type inlet valves, which can be freely changed in height, often leak if the sealing ring does not fit tightly with the pipe wall.

Second, the treatment method of toilet water seepage

1. Check the flush switch.

Whether to reset or not. Some flush toilets.

The plastic flush switch will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. Inspect the drain rubber under the ball valve.

Whether the gasket is aged, the seal is not tight, and the problem needs to be replaced.

2. Check whether the connection between the spherical float of the water tank and the water inlet switch is loose, whether the float is in place and the switch is not closed, resulting in the water inlet does not stop, and the water flows out from the upright drain pipe after the water is full, as long as the connection between the float and the water valve switch is tightened. If the rubber ball valve is damaged, the seal is not tight, and there is a water leak, it needs to be replaced immediately.

3. Water tank leakage, basically a problem with the drain valve, check the situation of the rubber plug at the outlet of the water tank, if the rubber plug at the outlet is damaged or blocked by foreign objects, the rubber plug is not tightly blocked, and it will also cause the toilet to flow more than once. If the water supply pipe in the tank is not placed correctly, it will also affect it to a greater or lesser extent.

The above is a summary of the repair methods for toilet leakage. That's the end of it. I believe that after reading the summary of the repair methods for toilet leakage.

You must have learned how to solve the problem of toilet leakage. I want to save toilet drains in a larger home. You can open the toilet tank.

Inside as a can filled with water.

If there is no such situation downstairs, it is recommended to check whether the water in the water tank overflows and overflows, if so, it is generally the water level control device of the water tank does not work or the water level control lever is adjusted too high, and it will be good to adjust it.

When the toilet leaks, it may be because the drain valve is not firmly connected, which will lead to the problem of leakage in the toilet over time, and the greater the water pressure, the more serious the leakage problem of the toilet will be. In addition, it is possible that the toilet inlet valve does not have a filter or the drain valve does not have a tight sealing bonnet.

If the toilet leakage is caused by the weak connection of the toilet drain valve, you can replace the drain valve with a one-piece one, and transform the connection of the drain valve into a threaded and water-resistant binder structure, so as to avoid the situation of toilet leakage caused by the weak connection of the toilet drain valve.

If the sealing valve cover of the toilet drain valve is not tightly covered, resulting in the problem of water leakage in the toilet, it is generally the material of the sealing valve cover that is problematic, in this case, the sealing valve cover can be replaced and replaced with a sealing cover with a better material to avoid this problem again.

Clean the toilet bowl in a timely manner.

The toilet bowl is easy to be stained with urine stains, feces and other dirt, if you find that there are still residues after flushing, you must use a toilet brush to clean it in time, otherwise it is easy to form macular stains, and mold and bacteria will also breed.

In addition to the vicinity of the pipe mouth, the inner edge of the toilet outlet and the outside of the base are places where dirt and dirt are hidden, when cleaning, first lift the toilet seat, and spray the inside with toilet cleaner, after a few minutes, use a toilet brush to scrub it thoroughly, it is best to use a brush with a thin head, so that the inner edge of the toilet bowl and the depth of the pipe mouth can be better cleaned. Then brush the base and other crevices.

If there is a problem, it needs to be removed and cleaned and replaced, if it is still leaking, it needs to be replaced with a new scoop. If the scoop is fine, see whether the rubber pad at the sink hose interface is aging, and replace it with a new rubber pad in time.

1. The toilet seat is very clean around it, and there are a lot of bacteria left, which is due to the fact that when flushing the toilet, it will cause the stains in the toilet bowl to splash on the toilet seat.

2. After the toilet is used, it needs to be flushed to dispose of the internal excrement, and if there are yellow spots left in the toilet, you must brush it off with a brush, otherwise after a long time, the yellow spots will solidify, and it will become very troublesome to clean up. Also, be sure to close the lid of the toilet bowl when flushing.

3. Around the toilet, it is generally necessary to place a garbage can, so that the waste paper used daily can be thrown into the trash can, which can effectively place the toilet to be blocked. However, we must develop a good habit of cleaning out the bags in the trash can every day, otherwise it is easy to breed bacteria, which will affect the use.

If the toilet leaks at home, you don't need to find someone else to do it yourself.

It is recommended to find a master to come and check on the spot.

1. The toilet material is of inferior quality, and the barrel body with poor raw materials begins to appear under the action of multiple punches during use, which can be solved by replacing the parts of the toilet.

2. Loosening of the interface between the sewer pipe and the toilet pipe will also cause the toilet to leak, and the toilet and the ground need to be re-glued.

3. Loose or falling parts inside the water tank will also cause the toilet to leak, and the specific parts need to be checked and installed.

The solution to the water leakage is as follows:

1. For the problem of the material of the water tank, the best solution is to separate the toilet tank, check one by one to see whether the parts in the toilet tank are in good condition, if some parts are broken, they can be repaired, and it is best to replace them if they cannot be repaired.

2. The loosening of the interface between the sewer pipe and the toilet pipe will lead to water leakage from the bottom of the toilet, and the sealant at the bottom of the toilet and the ground needs to be removed, and then the flange is installed.

3. If there is a leakage caused by loose or falling parts inside the water tank, it is recommended to ask the workers who repair the toilet to carry out professional maintenance as much as possible, so as to ensure the normal use of the toilet.

The reasons why a flush toilet leaks are as follows:1. The rubber ball valve is broken: once the rubber ball valve is broken, the sealing of the entire water tank is not good, just like there is a hole in the wooden barrel, so the water will continue to flow out.

2. Aging of the rubber gasket of the mixing port: After long-term use, the rubber gasket will become thinner and thinner, and eventually it will be completely aged.

3. The link between the floating ball and the water inlet switch is loose: open the toilet tank, we can see a small ball floating on the water surface, and the small ball is connected to the water inlet with a water pipe, check whether the connection between the two is tight, if it is loose, just tighten the connection.

4. The water tank is damaged by external force: the water tank may be damaged by external force, resulting in water leakage.

The reasons for toilet leakage are: water tank failure, toilet material problems, and no filter on the inlet valve.

Damage to the buoy inside the tank, loose connection between the float and the water inlet switch can cause the toilet to leak. You can open the toilet tank and pull the buoy up and down with your hands, **whether the buoy is sensitive. If it's hard to move, there's a problem with the buoy.

Then check the connection between the float of the water tank and the water inlet switch, if the float is in place and the switch is not turned off, it will also cause the toilet to leak. The toilet bowl is made of inferior material or has been used for too long, resulting in cracks in the internal ceramics, which will lead to water seepage in the cracks of the toilet ceramics. If the inlet valve is not filtered, it will cause impurities in the water to easily clog the sealing ring of the toilet tank.

Small holes, resulting in the inlet valve can not be closed, the seal fails and water leakage occurs.

Toilets. Its technical characteristics are in that, in the upper part opening of the existing toilet S-type water trap, a cleaning bolt is installed, its cleaning bolt is mainly made up of an inspection port and a cleaning bolt gun, the inspection port is embedded on the S-shaped reservoir bend upper reserved opening, and the cleaning bolt gun is a tool used for removing the blockage. Toilets, toilets characterized by the human body sitting type when used, are divided into direct flushing type and siphon according to the flushing method.

Siphon type is divided into jet siphon type and vortex siphon.

Many people have encountered the problem of water seepage in the process of using the toilet, the first thing to understand about the toilet seepage is the cause of water seepage, and only by knowing the cause of water seepage can it be solved, so what is the cause of toilet water seepage? Today I will answer for you, and friends who want to know may wish to take a look with us!

1. What is the cause of toilet water seepage?

1. Inferior material:

Now there are some bad manufacturers in order to reduce the cost of toilet production, will choose some very inferior materials for production, which is easy to lead to the water outlet, water inlet pipe in the injection molding cracking, so that the toilet seal is poor, resulting in water through the drain valve from the overflow pipe into the toilet, resulting in water seepage.

2. The accessories are too miniaturized.

Nowadays, many brands of toilets in order to upgrade the product, will pursue miniaturization in the accessories, so that the buoyancy of the float is insufficient, when the water floods the float, the inlet valve still cannot be closed, so that the water will continue to flow into the tank, resulting in water from the overflow pipe into the toilet and causing toilet seepage.

3. Improper design:

Nowadays, many toilets will have the problem of water leakage due to improper design of the toilet tank, which allows other accessories to interfere with each other when it is running. For example, if the float rod is too long or the float is too large, it is easy to cause the friction between the walls of the tank to increase, thereby limiting the free lifting of the float.

4. The connections of the drain valve are not tightly sealed.

If it is not a one-time injection molded drain valve, it is easy to cause the joint to be poorly sealed, and the pressure of the tap water can easily flow from the gap into the toilet through the overflow pipe, resulting in water leakage.

Summary: The above is for you to share what is the cause of toilet leakage, I believe you have a corresponding understanding after reading the above sharing, I hope the above sharing can help you, if you need to know more about relevant information, please continue to pay attention to Qeeka Home**, will answer for you one by one.

Toilet bowl leakage refers to the appearance of water stains at the bottom of the toilet bowl and does not keep it dry properly, which can cause inconvenience and unhygiene. The causes of toilet leakage include the following:

1.Broken seal: If the seal between the bottom of the toilet bowl and the drain is not maintained properly, water seepage will occur. Seal breakage is generally caused by improper installation, age, or improper use.

2.Hose connection problems: If the hose connection between the toilet bowl and the wall is not properly connected, it can lead to water seepage problems. This is because the hose connection is not kept tight, allowing moisture to seep out of it.

3.Toilet floor problems: If the toilet floor is uneven or cracked, it will affect the toilet seal, which in turn will cause water seepage problems.

4.Problems with the toilet bowl itself: If there is a problem with the toilet bowl itself, including damage, aging, and undurability, it will lead to water seepage problems. This situation usually requires the toilet to be replaced to ensure toilet hygiene.

In short, the problem of toilet water seepage cannot be ignored, and it needs to be checked and repaired in time to ensure the normal use of the toilet and the hygiene of the toilet.

Water seepage on the toilet is generally caused by the following reasons:

1.Aging or wear of the sealing ring: The sealing ring of the toilet bowl is generally made of rubber, and after long-term use, the sealing ring will be deformed or even cracked due to aging and wear, resulting in water seepage.

2.The water level is too high: If the water level in the toilet tank is too high, the water will flow into the toilet bowl from the channel through the flush valve, and if the flush valve is used for a long time, it will cause the seal to fail and seep water.

3.Scale accumulation: If the inside of the toilet bowl that has been used for a long time is blind and the scale is not cleaned for a long time, the scale will affect the sealing effect of the sealing ring and cause water seepage.

4.Loose water joints: If the inlet or drain connections of the toilet are not firm or loose, it will cause the water in the pipe to leak to the toilet bowl.

5.Improper installation: If the toilet is not installed properly, it can also lead to water seepage. For example, the rubber gasket seal is not placed in a suitable place during installation, or the height of the toilet water seal is not adjusted.

How to solve toilet leakage?

1.Replace the seal: Before replacing the seal, drain all the water under the toilet bowl and remove the seal. Take care to use the correct size seal and soak it in hot water for about 10 minutes before installation to increase its softness and facilitate installation.

2.Adjust the water level: Adjust the water level in the toilet tank to the normal range and keep it at a suitable water level to prevent water seepage caused by too high or too low water level.

3.Cleaning scale: Regularly clean the scale in the toilet, especially the dirt in the toilet bowl is not easy to clean, you can use a special cleaning solution to clean it.

4.Fasten the pipe connection: Check the toilet inlet and drain pipe to the pipe interface to make sure it is fastened and secure, preferably with sealant and fastening tools.

5.Reinstall the toilet: If it is water seepage caused by the toilet bowl itself, you can remove the toilet bowl and reinstall it, and add the necessary sealing materials to ensure the sealing effect. If something goes wrong, it is recommended to have a professional install it.