How to clean the air conditioner filter, how to clean the air conditioner filter

Cleaning Method:1First, unplug the air conditioner.

This is very important. Appliances must be safe. 2.

Remove the front panel of the air conditioner, dig it up directly, and lift it up. You will see two filters. 3.

Remove the strainer, take the water pipe, and rinse with tap water. Don't use dish soap or anything like that, just rinse it and you're good to go. 4.

Please dry in a cool place, not in the sun. The filter screen is generally plastic and resistant to high temperatures. 5.

Put the cleaned filter back into the air conditioner. If the air conditioner is dirty, clean it in advance. In this way, the air conditioner will be much cleaner and fresher when it is used again.

Precautions: When cleaning, you must not use a brush or something like that, which will make the filter eye of the filter screen larger, damage the filter, and affect the use effect of the air conditioner.

Air conditioner cleaning filter method:Tools Material: Gree air conditioner, detergent.

Method Steps:1. First of all, cut off the power supply of the air conditioner to be cleaned.

2. Open the air conditioner panel from both ends (directly buckle open, no tools required) and you will see two air conditioner filters.

3. Just pull out the two filters directly by hand.

4. Put the extracted filter into the water to clean (there is no soft brush and add a little detergent).

5. After washing, it is much cleaner and can be dried.

6. Install the dried filter back into the air conditioner, and cover the air conditioner cover directly. Next time, you can use it directly, clean and healthy is as simple as that.

Operating equipment: Haier inverter air conditioner1. First of all, break the outer panel outward, as shown in the following figure:

2. Expose the filter screen in the red circle, as shown in the figure below

3. Then push out the filter screen, as shown in the figure below:

4. Then pull out the filter of the air conditioner, as shown in the figure below

5. Finally, the filter of the air conditioner was successfully taken out, as shown in the figure below

Be sure to pay attention to the following during the cleaning process:

1. Before cleaning the air conditioner, make sure that the power of the air conditioner has been turned off. to ensure personal safety.

2. If you need to use a brush to brush the foam evenly when cleaning the air conditioner, you should brush the brush along the direction of the fins to avoid damaging the fins.

3. Another point is to pay attention to the cleaning of the ground during the cleaning process. so as not to re-contaminate.

First, we take this filter off. Just flip the left and right lids, and the whole lid will open.

When the lid is opened, you can see a filter on the left and right, which is not difficult to find. It's also very easy to take off, let's see if there is a lot of dust on it.

Wet it under the tap first. Prepare a soft-bristled brush to scrub all parts of the wire mesh at once. If necessary, you can add a little laundry detergent to make it cleaner.

Look how dirty the water is after my scrubbing!

After brushing clean, wipe off the water stains with a damp towel. Be sure to wipe it dry, it can't be installed in the air conditioner and have water stains. Of course, if there is sun, natural drying is best.

After making sure that the filter cover is free of water stains, install it on the air conditioner. How to disassemble how to install, very simple, try it at home to know.

Well, after the filter is cleaned, there will be no more dust when blowing the air conditioner.

In summer, almost every household uses an air conditioner, and it is recommended to clean it at least once a month, not only to ensure that no dust is blown out, but also to avoid too much dust from entering the internal parts and causing damage to the air conditioner. If the air conditioner is broken, it is very troublesome to repair, and it costs a lot of money to replace it with a new one.

Have you never cleaned the filter of your air conditioner, take it out and take a look.

This is too simple, and there are already two people below who have explained it in detail, so I won't repeat it.

7-step cleaning method for air conditioner filter.

The steps to clean the air conditioner filter are as follows:

Turn off the air conditioner: Before cleaning the filter, first turn off the air conditioner to avoid electric shock.

2.Remove the filter: Remove the filter from your air conditioner and place it in a place that is easy to clean, such as a bathtub or laundry sink.

3.Rinse with clean water: Rinse the filter with clean water, which can be gently wiped with a soft-bristled brush to remove dust and dirt.

4.Wash with laundry detergent: Add the laundry detergent to clean water, stir well, then soak the strainer in the laundry detergent water and let it soak for a while to remove dirt and oil.

5.Rinse with clean water: Take the strainer out and rinse with clean water to remove the laundry detergent residue.

6.Dry: Leave the strainer dry and place it in a cool place to dry to protect it from moisture.

7.Installation: Install the dried filter back into the air conditioner, check if the installation is correct, then turn on the air conditioner and continue to use it.

The above are the steps to clean the air conditioner filter, as long as you follow the steps, you can keep the air conditioner running normally and ensure indoor air quality.

How to clean the air conditioner filter:

1. Take out the filter of the air conditioner, dust the filter with a brush vacuum cleaner, and then clean it with clean water. When it is too dirty and oily, it can be washed with stain remover or neutral soapy water, rinsed with water and dried.

2. After removing the air dust screen, gently pat or use an electric vacuum cleaner to remove the dust. If there is too much dust on the filter, you can rinse it with water or dip a soft brush with neutral detergent, but the water temperature should not exceed 50 when cleaning, and you can't use laundry detergent, dish soap, banana water, etc., so as not to deform the filter screen.

3. After rinsing with clean water, wipe it dry with a soft cloth or put it in a cool place to dry, and never expose it to the sun or dry it in an open flame such as a stove to avoid the deformation of the dust filter.

4. After rinsing the filter with clean water, wipe it dry with a soft cloth or blow it in a cool place, do not expose it to the sun or dry it in the stove, so that the filter screen will be deformed.

How to remove the air conditioner filter:

1. How to remove the air conditioner filter? First of all, before disassembling the air conditioning filter, carefully open the air conditioning shell, generally the air conditioning shell has two small card slots stuck, and gently pull the outer cover outward.

2. Then open the outer cover of the air conditioner, there are often two buckles inside, and you have to gently pick it open to make the outer cover fully open. The next thing is to take the filter, the filter is relatively easy to take, but it is stuck by a few card slots, first push the filter up, and after the lower end is out of the card slot, then gently drag the filter down and take it out.

3. After removing the filter of the air conditioner, some air conditioners have black particles that strengthen the filtration, which should be taken off separately for cleaning and drying.

Here's how:Equipment: Midea air conditioning.

1. Before disassembling and washing the air conditioner filter, the power supply should be disconnected to ensure safety.

2. Turn on the air conditioner panel switch, one on each side of the air conditioner.

3. Buckle outward at the same time.

4. Buckle the panel to see the filter.

5. Lift up the filter screen buckle.

6. Then you can remove the filter with one pull.

7. Rinse the filter with clean water.