How to clean the air conditioner filter in Gree cabinet machine

1. Before cleaning, you need to disconnect the power supply of the air conditioner, and then separate the wind deflector from the whole, this step needs to be operated from both sides of the air conditioner.

2. Remove the things on both sides of the air conditioner, you can see the screws and buckles that were blocked before, both of which are used to fix the lower part of the air conditioner, and you must use a tool to loosen the screws first.

3. The loosened screws should be properly placed to facilitate the subsequent reinstallation work, and then take out the buckles at both places of the wind shield.

4. Carefully pull the wind deflector out to avoid damage to the lower part of the air conditioner.

5. Rinse the removed filter screen with water flow to ensure that every corner is cleaned.

6. After the filter is cleaned, the air outlet joint of the wind shield is also rinsed with water.

7. Then place each part in a ventilated environment to dry, and then carry out a series of assembly, first fix the bottom of the wind deflector, then push the wind deflector inward, and then check the stability.

How to open the lid of the Gree cabinet machine air conditioner.

1. First take a look at the buckles and grooves around the air conditioning panel or some structures that are convenient for operation to facilitate disassembly.

2. Place both hands on the grooves on both sides of the air conditioner at the same time, and pull outward, with a little force, because there is a buckle that will jam the panel and is not easy to open.

3. After opening the panel, don't peel it up too hard, open it at most about 60°, so that you can see the whole situation inside the air conditioner, the main structure is the filter, electronic components, heat sink or something.

4. The filter can be removed, there is a bulge in the middle, push it up, and pull it outward after exceeding the white baffle;

5. The filter screen is very thin, don't pull too hard, if it is stuck, you can stop and observe first to see if there is a foreign object blocked.

6. After the filter is removed, you can see the heat sink, which is equivalent to the guide rail of the filter screen on both sides, and the heat sink can be cleaned with cleaning agent.

Open the panel on the outside of the cabinet machine, then take out the filter screen, rinse it with clean water, or brush it with a brush, and then dry it in a ventilated place, and install the air conditioning filter.

Gree cylindrical cabinet machine dismantling filter:Tools Raw material: Screwdriver.

1. Step 1: Touch the function button twice to display cleaning in the shutdown state.

2. Step 2: Select the cleaning function in the shutdown state, touch the button area, all the keys are displayed, press the "function" button until the "cleaning" pattern flashes, and then press the " or " " button to confirm, the cleaning pattern is bright. At this point, the housing starts to rotate automatically, and after waiting for about 27 seconds, the housing stops rotating.

3. Step 3: Remove the air inlet panel.

Use a screwdriver to unscrew the screws that hold the air intake panel in place.

Break open the two tabs of the air intake panel.

Remove the air inlet panel.

4. Step 4: Remove the filter.

Pull out the filter in the direction of the arrow.

How to clean the filter screen of the <> cabinet air conditioner: the first step: check the appearance and operation status of the machine, and explain the situation to the customer, so as to avoid unnecessary disputes after cleaning; Step 2:

Unplug the power supply and use a brush to clean the floating dust on the surface of the evaporator; Step 3: Use a portable vacuum cleaner to suck out the dust inside the evaporator.

This answer is applicable to most brands of air conditioners such as Gree, Haier, and Midea.

Many families or restaurants will use cabinet air conditioners, and we all know that the hanging air conditioner filter needs to be cleaned, and the cooling effect will be better when used, and cabinet air conditioners are no exception. Next, we will teach you how to clean the filter screen of the Gree cabinet air conditioner, and I hope that the Gree vertical air conditioner dismantling and cleaning ** given in the article will help you clean the air conditioner.

How to clean the filter screen of Gree cabinet air conditioner

First of all, find the two covered fixing screws on the cabinet panel, and open the panel and remove the filter after unscrewing the screws; First use a brush to remove some of the dust, then put it in warm water, add baking soda and white vinegar and soak it for about 10 minutes, then wipe it with a rag and place it in a ventilated place to dry the water, and finally install it back and cover the panel.

Gree vertical air conditioner dismantling and washing**

1. First of all, you can see that there are two screws at the air outlet of the cabinet air conditioner, and use a screwdriver to unscrew these two screws.

2. As shown in the figure below, these two screws have been unscrewed, at this time, pay attention to save the screws and don't lose them.

3. Then the plastic shell of the cabinet air conditioner can be easily removed from the side, and the filter screen can be seen.

4. Remove the filter directly, and then use a brush to brush off the dust on it.

5. Rinse with clean water, pay attention to the air-drying filter screen before installation, so that it is OK.

Additional: Air Conditioner Cleaning Steps.

1. To clean the air conditioner, the main power supply of the air conditioner should be turned off first to avoid leakage or electric shock accidents;

2. Different types of air conditioners, disassembly methods will be different, if you are not clear, you can check the product manual, first remove the filter screen of the air conditioner, put the filter screen into warm water and soak it for a while, and then clean it with a brush and drain the water.

3. Use a special air conditioner cleaning foam into the inside of the air conditioner, let the foam fully dissolve, and then wipe it clean with a rag, especially for the area around the filter screen, pay special attention to cleaning, and the cleaned rag can not have too much water to avoid moisture entering the inner machine.

4. Then clean the dust accumulated on the fan of the outdoor unit, clean the dust first, and then rinse the entire outdoor unit with water to flush the dust on the air outlet.

5. After all the cleaning is dry, install the filter back, turn on the power supply, turn on the air conditioner to the maximum, let the garbage and foam inside it blow out, and finally clean the surface of the air conditioner with a rag.

Hello, dear, the method of cleaning the Gree cabinet air conditioner filter is as follows:1First, turn off the power to your air conditioner and unplug it to make sure it's safe.

2.Open the air conditioner panel and find the filter location. 3.

Gently press down on the top of the filter and pull it forward. 4.Use a soft brush or vacuum cleaner to gently clean the filter and the dust and dirt around the filter.

Chang Song Chong 5If the filter is very dirty, you can gently clean it with warm water or a mild detergent. However, do not use excessively hot water or strong acidic and alkaline detergents.

6.After cleaning, rinse the strainer with clean water and let it dry. 7.

Reinstall the filter onto the aircon panel and make sure it's fully plugged in. 8.Finally, turn off the air conditioning panel and replug the air conditioner.