How to clean the earphone port, how to clean the earphone to be clean

It is recommended to use a dry, lint-free soft cloth for exterior cleaning; Clean the microphone and speaker grille with a dry cotton swab.

Note: Do not spray the earpiece of the earphones directly with a large amount of alcohol or other liquids to avoid damage to the product caused by liquid ingress; Do not use sharp objects to clean the headphones.

If the mobile phone is open for a long time, it is easy to accumulate dust, especially the earphone port, or garbage such as lint by mistake, which many people may not care about. Then this situation needs to be cleaned regularly. Let's take a look at how to clean it.

Use a toothpick to remove the sharp part and wrap it with double-sided tape to compact, pinch the head when cleaning the charging port, and clean the earphone port without pinching it, and the double-sided tape can stick out a lot of dust. Use a toothbrush with fine and soft bristles instead of hard bristles, gently brush the headphone jack and headphone port, and then use a hair dryer or breath to blow it. This method is a lot of second-hand mobile phones as well as refurbished mobile phones.

Some friends will use a cotton swab dipped in alcohol to wipe it, and the alcohol will not leave traces after volatilization, so pay attention to deal with it when the machine is turned off. And don't wipe it with water, as it may cause the phone to get into the water and rust.

Power banks, charging heads, and data cables can also be cleaned in a similar way, and the most effective way to prevent dust is to put them in a storage bag when not in use. Especially for relatively small things such as mobile phone USB flash drive and data cable adapter, put it in a storage bag not only dustproof but also anti-loss.

Usually, the dust in the headphone jack of the mobile phone can be avoided. Mobile phones don't get into the dust easily when they are on the table, but mainly from our pockets or handbags, because although the pockets look clean, there is actually a lot of dust and lint. So usually when you put your phone, put the end of the headphone jack up, don't put it at the bottom of your pocket.

1. Headset cleaning method:

Wipe with wet wipes; Pay attention not to pull the thread when wiping;

rub with alcohol; Pour alcohol over a cotton pad or a piece of absorbent enough paper to rub it. This method is better than wiping directly with wet wipes;

Wipe with cleansing water and pour the cleansing water over a cotton pad. The results were immediate;

As the saying goes, it's better to treat the symptoms than the root cause. Instead of laborious cleaning, it is better to take good care of our headphones on a regular basis. Whether it's white or black headphones, as long as we pay attention to daily maintenance, we can avoid them getting dirty or slow down the rate of aging.

Compared to the cleaning method of headphones, the way to maintain them is simple and effective.

2. Wearing: Sweat is the number one killer of wires, and most of the oxidation of wires is caused by long-term contact. If we can pay attention to the way when wearing headphones, such as clipping the wire in the collar, we can avoid direct contact with **.

Slows down the process of oxidation of the wire.

3. Preservation: Humid air is also the enemy of the earphones, and the moisture in the air will make the unit moldy and the wire oxidized, especially for the HiFi earphones. Often we neglect to maintain it, and if we take it out for a long time and use it, we will find that the unit or cable has been damaged.

Therefore, adding desiccant to the packaging is a one-and-done solution.

Experts suggest that if the headphones are worn for a long time, bacteria will breed, and in-ear headphones are more likely to harbor bacteria than earbuds, and after wearing them for an hour, the bacteria multiply nearly 5 times more than before; After wearing the earbuds for an hour, the bacteria multiplied nearly 3 times more than before.

Light cleaning, wet wipes cleaning method.

Generally suitable for cleaning headphones that are not too dirty: use a wet towel to gently rub the headphone cable back and forth a few times, you can clean as new, pay attention not to wipe it vigorously with a dry paper towel, the earphone cable is very fragile.

Medium cleaning, toothpaste cleaning.

I don't know if you have noticed that if you use the earphone cable for too long, it will not only be a little dirty, but even yellow, and then toothpaste can come in handy!

The toothpaste itself has a whitening effect, and it can basically restore the original appearance of the earphones by rubbing it with a small towel along the earphone cable a few times. Note that after cleaning, wipe it twice with a small semi-wet towel, and the action should be gentle.

Deep cleaning, special cleaning method.

If the headphones are already yellow and old, then a special cleaning agent is required. The cleaner with the highest recommendation index is the foam cleaner for car interiors, which is similar to alcohol and is volatile and non-conductive.

Operation: Put the earphones in a plastic bag, spray with detergent, let the white foam cover the entire earphones, then rub them gently with your hands, leave them for two hours, and then take them out and wipe off the surface residue with a rag.

Heavy cleaning, alcohol cleaning.

The mesh tip of the headphones, optionally wiped with alcohol. One can remove the oil stains on it, and the other can disinfect the headphones. However, alcohol is an organic substance that can cause aging of headphones, so it is not recommended to use them regularly.