How to clean the filter screen of the air conditioner cabinet, how to clean the filter screen of the

After brushing off the dust with a brush, put the air conditioner cabinet filter in a clean basin, then wash it with laundry detergent, and finally rinse it with clean water.

In fact, it is dust, if you can't wash it off with water, you can take a brush or a towel, it's easy to get rid of! I really don't use some dish soap. If the dish soap doesn't rinse, we can use baking soda to soak it and then it can be easily removed.

After cleaning, be sure to dry it, otherwise it will not be good to enter the electrical appliance, knock a few more times, and then light it up for a while! I dry it and put it. Then it is to install the cleaned filter back into the air conditioner, and it is very simple to put it in along the chisel, and finally it is to put on the lid; Just knock it hard.

The air filter of the air conditioner plays the role of a clean air, ensuring that the air blown out is clean enough. So it's important to clean it regularly. The method of disassembling the filter of the air conditioner cabinet is as follows.

First we need to disconnect the power supply, and then open the front cover of the air conditioner. Pay attention to when opening the lid, hold the recess at both ends of the air conditioner with both hands, and force outward together to easily open the front cover of the air conditioner.

Open the front cover of the air conditioner to about 60 degrees, hear a slight "click", at this time, the front cover can be smoothly stopped without falling off, we can put down our hands. Two air filters for air conditioning are presented in front of us.

The air conditioning cabinet does not come out of the scenery to hear, it turns out that the filter is too dirty, teach everyone how to clean the filter.

Here's how to clean the air conditioner filter:1. Find the air inlet grille on both sides of the air conditioner and pull out the filter screen with a little force, and rinse it with water below 40 degrees.

2. If it is dirty, you can use a soft brush to gently scrub it, wash the filter screen, shake the water dry first, and then put it in a ventilated and cool place to dry naturally.

3. During the drying process of the filter screen, you can wipe the air conditioner with a rag, which is conducive to the use of the cleaned filter screen in a clean environment, and finally the cleaned filter screen can be installed.

Air conditioner cleaning filter method:Tools Material: Gree air conditioner, detergent.

Method Steps:1. First of all, cut off the power supply of the air conditioner to be cleaned.

2. Open the air conditioner panel from both ends (directly buckle open, no tools required) and you will see two air conditioner filters.

3. Just pull out the two filters directly by hand.

4. Put the extracted filter into the water to clean (there is no soft brush and add a little detergent).

5. After washing, it is much cleaner and can be dried.

6. Install the dried filter back into the air conditioner, and cover the air conditioner cover directly. Next time, you can use it directly, clean and healthy is as simple as that.

1.When cleaning the cabinet air conditioner, be sure to unplug the power socket of the air conditioner first, so as to ensure the safety of cleaning the air conditioner and effectively avoid the occurrence of contact.

2.Before cleaning the air conditioner, we can clean some dust on the surface of the air conditioner. At this time, you can wipe the surface of the air conditioner with a wet towel. At the same time, pay attention to cleaning the dead corners of the air conditioner when cleaning.

3.Once the surface of the air conditioner is cleaned, the air conditioner panel can be turned on. When taking out the air conditioner filter of the cabinet, there is usually a clip between the filter and the filter bracket.

If there is a baffle, turn the left and right intake baffles forward, then push the filter out of the buckle, and then slowly pull the filter out in the arc direction. The filter of the lower air inlet needs to be gently removed from the bottom of the air conditioner.

How to clean the filter screen of the <> cabinet air conditioner: 1. Cut off the power supply and open the host panel. The action should be slow and light, because many plastic products are easy to damage.

Some air conditioner hang-up panels have a button at the top, so be careful not to break. The air conditioner cabinet is divided into an inner panel and an outer panel, and pay attention to the wires connected when removing the cabinet panel.

2. Remove the filter. The air conditioner hangs up and gently pulls out the filter directly. Some cabinet filters are on the outer panel, which can be removed, and some models are fixed with screws, which need to be paid attention to.

3. If the fin is dirty, you can use a special cleaning agent to rinse the large particles, and do not use a hard brush, otherwise the fin will be damaged. If large particles are not obvious, ignore this step.

4. Spray the perfect air conditioner foam cleaner on the fins, shake well before spraying to form pressure, spray at an oblique angle of 20 degrees, and spray several times according to the degree of dirtiness of the air conditioner. The dirtier the air conditioner, the darker the foam will become, generally brown, and the dirtier it will turn black. Wait about fifteen minutes after spraying.

5. Wait for the gap to clean the filter screen and wipe the panel with a special cleaning agent.

6. After the foam is decomposed, you can use a watering can to rinse the fins according to the degree of pollution, if it is not dirty, you can ignore this step. If it is a cabinet unit, it can be equipped with a flush sink.

7. Reset the filter screen, be sure to install it in place, and prevent it from cocking. Reset the panel. If it is a cabinet, the bottom of the cabinet can be scrubbed clean before the panel is reset.

8. Turn on the power and restart the machine for 30 minutes to ensure that the dirty water is completely drained from the drain. To avoid spraying the detergent, start by covering the exhaust vent with a towel for about 10 minutes.

This answer is applicable to most of the air conditioning models of brands such as Midea KFR-26GW N8MJA3 &> Gree KFR-35GW NHA1BAJ.

1. Open the air inlet grille

2. Gently push up the center protrusion of the filter screen, and then pull down:

3. Install the filter screen

Note: 1. Unplug the air conditioner socket before cleaning and turn off the air conditioner;

2. When installing the filter screen, do not install the left and right sides of the circle, and refer to the steps of disassembling the file when installing;

3. You can directly use warm water to clean the filter screen. In order to be able to clean, you can use detergents and detergents in the cleaning process, and you can use a brush to brush them. It is recommended to use a soft brush for brushes, and avoid using a hard brush to break the gap between the filters.

Attached is the method of removing the filter screen of other models: