What should be done if the closed ceiling does not hide ash?

Modify the beam structure, including sealing the beam structure, to reduce the abruptness of the beam structure. Decorate the yin and yang corners of the roof surface to highlight the lines and layers of the interior space. We generally customize a large arc gypsum line similar to the diagram and stick it to the beam to form a radian shape, which is both beautiful and not too complicated, and the effect is also more atmospheric.

The space is partitioned, and the visual height of the beam is reduced, and the abruptness of the beam in the space is reduced, so as to achieve the visual effect of "it is a beam, but it doesn't look like a beam".

Through the coating of the veneer or the color change of the coating, people's perception of the original concrete beam is changed, the cold feeling of the concrete beam is weakened, and the sense of design is increased. If the thickness of the beam is small, then the beam can be covered directly by the design of the ceiling. In this way, the ceiling is only made in the place where there are beams, and the other places are still the original roof, which does not affect the floor height.

When decorating, we usually knock it off directly, so that the effect is better, but if the beam plays a load-bearing role, we have to find a way to hide. Otherwise, the effect will not look good, and it will also cause the phenomenon of the beam pressing the top.

You propose how to deal with the beam, in fact, it is very simple No need to deal with it, there is a beam in the living room, you can use it as a partition between the sheds, if you are willing to distinguish the area, it will be designed according to the two spaces, if you do not distinguish it, you can directly route the line. The beam is treated in the same way as the rest of the top surface, without "special" treatment, which "weakens" the presence of the beam and makes it "one" with the top surface; I think the way to deal with the gypsum line is to walk one circle in each of the two top areas that the beam is divided into.

There are many beams and columns in modern house building, the horizontal one is called the beam, the vertical one is called the column, there must be a beam around the general house, some houses have a particularly large structure, and there may be a beam in the middle of the house, and this beam is called the middle beam. Generally, simple houses or houses with relatively low floor heights will not have suspended ceilings, and the general practice of not hanging ceilings is to walk around the roof with a gypsum line.

The ceiling without leaving the light trough is easy to clean, that is, only the low-level ceiling is made. You can give it a try, so that you will not often hide ashes, in fact, as long as the hygiene of the home is kept clean, and then often take care of it, the ceiling is not easy to hide ashes.

First of all, we can make the cabinet next to the roof, and secondly, it should also be custom-made, and if we do this, we can solve the problem very much, and we must fill the gap when making it.

If you want to make a ceiling fort, if you are conventional, then we have to make a large flat floor, so that there will be no gaps, and the ceiling made also has a sense of hierarchy and is also good-looking.

Suspended ceilings are prone to ash trapping. Ceiling is a very important decoration technique for the top surface of the space, with the change of our aesthetics, those traditional hollow-shaped ceilings, edge ceilings, etc., have been unable to meet the needs of the owners of the new era, and those layers of complex stacked ceilings are good-looking, but also not suitable for most family design.

Types of suspended ceilingsComplete suspension, simply put, is to leave a side groove around the flat roof, the overall sense of the ceiling is strong, the design is more concise, the surrounding plus light strip suspension effect is more obvious, the light color can also be changed according to the actual demand, separation and suspension, is to divide the ceiling into two parts, the middle flat top and a circle of ceiling around the separation, can be the same height, can also have a certain height difference, according to the actual height to design.

The suspended ceiling is to leave a certain space around the top surface modeling, and the space left can be made of light strips, or not, of course, the effect of light strips will be better, there are generally two ways to present, one is the complete suspension of the entire ceiling, and the other is the suspension with separation, the suspended ceiling usually appears together with the design of no main lamp, and the combination of the two is the best way to show.

1. Light steel keel gypsum board ceiling. The light steel keel is tough and not easy to deform, and the living room ceiling is generally made of gypsum board, which is cheap to cost, easy to install, and has a very good performance effect.

2. Wooden keel gypsum board. The difference between this and the previous one is that the keel is a wooden frame, but now there is a synthetic wooden keel, and the effect of hitting the living room is also good.

3. Glass or light box ceiling. These two types of ceilings are glass products, because of their rich colors and very distinctive, so now more and more applications are used in home decoration.