How to clean the filter screen of Gree cylindrical air conditioner

The steps of Gree cylindrical air conditioner cleaning filter are as follows:

1. Gree air conditioner.

The cylindrical cabinet unit is turned off, and then the function key is touched twice in succession.

2. Cleaning will be displayed on the display screen, press the arrow key once, stop rotating after the tuyere is displayed, and then remove the shell.

3. Carefully remove the two filters, generally a lot of dust will accumulate, and it will no longer come into contact with home and clothing.

4. Place the filter screen under the faucet for rinsing, then brush out the dust with a brush, and wipe the water stains on the filter screen in time after brushing clean to prevent rust.

5. Replace the filter screen, and it should be noted that the filter screen should be cleaned once every two months.

Precautions

1. When cleaning the air conditioner filter, you should remove the dust filter on the surface first according to the instructions in the manual. During the disassembly process, the metal parts of the indoor unit should not be touched, because these metal parts are very sharp and easy to be scratched.

2. The temperature of the water used for cleaning should be lower than 50 degrees Celsius.

Laundry detergent cannot be used.

Detergents such as dish soap, otherwise the filter dust screen will be deformed.

How to clean the filter screen of the cylindrical air conditioner:There are two ways to disassemble the filter screen of the cylindrical air conditioner, one is an ordinary air conditioner, the filter screen is on the back of the indoor unit, and the outside of the filter screen is a checkered grille, and the screen cover has a position to pick by hand, and the filter screen can be pulled out by picking the screen cover.

There is also a kind of electric, in the shutdown state, press the "function" button on the panel, you will see a sprinkler pattern flashing, press the upper key or the lower key pattern is always on, the shell of the air conditioner begins to rotate, the filter screen will turn from the back to the front, then you can cut off the power to remove the filter for cleaning, after the cleaning is completed, the filter screen will be installed back, and the filter will automatically reset after the power is turned on.

Cleaning the filter:If the filter is dirty (e.g. oily), it can be cleaned with warm water (below 45) dissolved in neutral detergent, and then left in a cool place to dry.

Note: Do not wash with hot water above 45 to avoid fading or deformation.

Never dry on a fire to avoid the strainer catching fire or deforming.

1.Turn off the power supply, remove the air conditioner panel, and take out the filter.

2.Rinse the dust off the surface of the filter with clean water.

3.Use a soft-bristled brush or vacuum cleaner to clean the inside of the filter to remove any dust and debris from the standby.

4.Soak the filter in warm water, add an appropriate amount of detergent, and gently rub it to allow the filter to soak thoroughly.

5.Rinse the strainer again with clean water until there is no dry foam.

6.Leave the filter dry and keep it out of the sun.

7.After cleaning, reinstall the filter into the air conditioner, turn off the panel, and turn on the power.

The steps of Gree cylindrical air conditioner to clean the lead filter are as follows:

Material Tools: Gree cylindrical air conditioner, soft bristle brush or vacuum cleaner, water, neutral detergent, brush.

1. First of all, turn off the power of the Gree cylindrical air conditioner and make sure that the air conditioner stops running completely. Locate the air conditioner's filter, usually on the front or top of the air conditioner. Filters are usually constructed of a detachable plastic mesh or metal mesh.

2. Gently remove the filter. If there is dust or buildup on the filter screen, it can be gently removed with a soft-bristled brush or vacuum cleaner.

3. Soak the filter in warm water and add a small amount of neutral detergent. Gently brush the filter with a soft-bristled brush to ensure that stains and dust are thoroughly removed.

4. Rinse the filter with clean water and scrub off any residual detergent or stains with a brush.

5. Dry the filter to ensure that it is completely dry before installing it back into the air conditioner.

If the cylindrical air conditioner wants to effectively clean the filter, the method is actually very simple, and the specific operation steps are as follows:

First of all, gently remove the filter screen, then pour 30ml of baking soda, 120ml of white vinegar and 10ml of dish soap into the small basin, then put the cleaning brush into the basin to wet, and finally use the cleaning brush to brush the stains on the pure jujube filter to clean it.

1. Turn off the power off and let go key in the power-on state, then touch the leftmost button to make all the entire function keys light up, press the function button twice in a row, and the cleaning button will light up, and touch the up or down button The filter of the air conditioner will automatically turn to the front.

2. Remove the screws that fix the back cover of the air conditioner.

3. Gently pull out the filter screen, clean the filter screen with clean water and dry it in a cool place.

4. Finally, push the cleaned filter back to the original position of the air conditioner according to the original trajectory, then install the removed back cover and fix the screws, and then press the switch twice continuously to turn the filter back to the original position.

1.First of all, turn off the power of the Gree cylindrical air conditioner and unplug it to ensure safety.

2.Open the panel of the Gree cylindrical air conditioner and find the filter.

3.Gently remove the strainer and rinse it off with clean water.

4.If there is stubborn dirt on the filter screen, it can be gently brushed with a soft bristle brush.

5.Dry the strainer with a clean towel or paper towel.

6.Put the filter lead spine back in place to ensure that it is securely installed.

7.Close the panel of the Gree cylindrical air conditioner, plug it in, and turn on the power.

8.Check if the Gree cylindrical air conditioner is working properly.

Notes:1When cleaning the filter, do not use overheated water or chemical cleaning agents to brighten and avoid damaging the filter.

2.When cleaning the filter, handle it gently to avoid deformation or damage to the filter.

3.Regular cleaning of the filter can ensure the normal operation of Gree cylindrical air conditioner and prolong the service life. It is recommended to wash it once a month.

Gree cylindrical air conditioner's filter steps: clever scrambling.

1. First of all, unplug the plug, open the panel of the indoor unit, there are two recesses on both sides of the indoor unit, and force it out at the recess to open it, and then lift the panel of the indoor unit upwards to a certain angle (about 60°), which can be fixed in this position, and then take out the filter screen, be careful when taking the filter code, and do not force it to disassemble and wash it according to the disassembly order, which will cause damage to the air conditioner.

2. Then Xiao Zhengdan rinsed with water, remember not to brush with a brush, put it in a cool place to dry, and install it after it is completely dry!

Filter. Features: Direct filtration, simple process, good air permeability, uniform and stable precision, no leakage, good regeneration performance, fast regeneration speed, easy installation, high efficiency and long service life.

Uses: Mainly used in air conditioners, purifiers, range hoods, air filters, dehumidifiers, and dust collectors, etc., suitable for a variety of different filtration, dust removal and separation requirements, suitable for petroleum, chemical, mineral, food, pharmaceutical and other industries of filtration.