How to clean the filter bucket on the water dispenser

According to the test of the relevant environmental health monitoring department, the cold and hot water bile in the bottled water dispenser will multiply bacteria, viruses, sediment residues, heavy metals and even bloodworms if it is not washed for three months, which seriously endangers people's health.

The water dispenser is usually the barrel neck of the bottled water upside down and placed on the "smart seat" of the water dispenser, and then the hose in the machine will introduce the water into two water galls, one of which is a hot water tank and the other is a cold water tank, in addition to the function of cold and hot water, these two water galls can also play a role in precipitating impurities in the water. People usually change the bottled water repeatedly, but ignore that there is still a certain amount of water in the inner tank of the water dispenser, which will hide disease-causing bacteria, and over time, it will naturally become a breeding ground for bacteria. Consumers often have such misunderstandings that the water dispenser itself is a water purification device, and the bottled mineral water is clean, even if the water dispenser is not cleaned and disinfected regularly, there will be no problem, so there will be all kinds of foreign substances in the water.

Therefore, the water dispenser must be thoroughly cleaned and disinfected regularly, and the commonly used method is to clean it with disinfectant solution, and then flush the water dispenser with clean bottled water until the residue of the disinfectant solution is washed away.

Steps to clean the water dispenser:

1.cut off the power of the water dispenser;

2.Insert the 5-gallon water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until the water is released, then turn off the faucet, and then hold the bottle with both hands and take out the water bottle upwards;

3.Cleaning the outside of the water dispenser and the smart seat;

4.Pour 600ml of special cleaning and disinfectant solution into the water storage tank;

After a few minutes, turn on the red and green faucets until the disinfectant is exhausted;

6.Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser;

7.Rinse several times with boiling or purified water;

8.Tighten the drain valve, and the disinfection and sterilization operation procedures are completed.

Take it out and wash it, otherwise you can't help it, thank you.

With the improvement of people's quality of life, we basically use water dispensers to drink water at home, which can intelligently filter tap water, and can be drunk quickly and with peace of mind. The main reason why it works so efficiently is because of its built-in filter, which can quickly filter out impurities in the tap water, providing us with pure water in time. However, if the filter is not cleaned regularly, it is also easy to breed bacteria and affect the health of the water we drink.

So how should we clean the water dispenser filter? Next, let's introduce the specific method.

Step 1:

When cleaning the water dispenser, we can directly soak the filter in warm water, wait for a few minutes and then unscrew it with a dry towel, separate the upper and lower sections of the filter element and rinse it under the faucet, and when the upper filter element is filled with about half a pot of tap water, shake the filter element up and down several times to pour out the remaining water, so that the micropores of the filter element are unblocked several times.

Step 2:

Shake the lower filter element by patting the mouth of the filter element up and down with the palm of your hand, and make the tap water clean filter material several times until the tap water flowing out of the lower filter element is clear.

Step 3:

Then we clean the water dispenser and its heating and cooling chambers, then put in clean water and repeat the rinse a few times without any problems. If you can't do it yourself, you can ask professional staff to help clean it regularly, which is more thorough and more assured.

The above is the specific solution of how to clean the water dispenser filter, I believe that everyone can quickly learn how to clean it through the introduction of the above content.

1. Cut off the power supply of the water dispenser; Insert the 5 gallon water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until water is released, and then turn off the faucet.

2. Hold the bottle with both hands and take out the water bottle upwards; Cleaning the outside of the water dispenser and the smart seat; Pour 600ml of special cleaning and disinfectant solution into the water storage tank; After 10 minutes, turn on the red and green drain faucets until the disinfectant is exhausted, and unscrew the back or bottom drain valve to drain the disinfectant in the water dispenser.

3. Rinse several times with boiling water or purified water, tighten the drain valve, and complete the disinfection and sterilization operation procedure.

Materials required: effervescent tablets, water, cleaning cloth.

The steps are as follows: 1. First open the sewage pipe behind the water dispenser and all the drinking water switches to empty the remaining water.

2. Then dissolve the disinfection and decontamination effervescent tablets in a ratio of two to one in clean water, so as to make disinfectant sakura liquid to scrub the inner tank and the inside and outside of the lid of the water dispenser.

3. Then fill the whole cavity with disinfectant, wait for 10 15 minutes of round oranges, and then open the sewage pipe of the water dispenser and the switch of drinking water to drain the disinfectant.

4. Continuously rinse the entire water dispenser with clean water, wipe it properly with a cleaning cloth, and then turn on the orange and tan switch to drain the rinsing liquid.

5. Finally, scrub the back wall of the switch with disinfectant.

Summary. 1.Separate the upper and lower sections of the filter element of the water dispenser, rinse the upper filter element with the tap water you feel, and brush the surface of the filter element with a clean toothbrush; 2.

When the upper filter element is filled with about half a pot of tap water, shake the filter element up and down several times, pour out the remaining water, and repeat it several times to make the micropores of the filter element unblocked; 3.Fill the lower filter with tap water, pat the mouth up and down with the palm of your hand, shake the lower filter element, and make the tap water clean the filter material, repeat it several times until the water flowing out of the lower filter element is clear. 4.

Put the water in the upper container of the water dispenser, unscrew the drain plug, and repeat it several times.

Hello, can you remove it, I guess your operation steps are wrong.

I'm sorry I don't understand, but can you elaborate on that?

1.Separate the upper and lower sections of the filter element of the water dispenser, rinse the upper filter element with the tap water you feel, and brush the surface of the filter element with a clean toothbrush; 2.When the upper filter element is filled with about half a pot of tap water, shake the filter element up and down several times, pour out the remaining water, and repeat it several times to make the micropores of the filter element unblocked; 3.

Fill the lower filter element with tap water, pat the mouth of the qin with the palm of your hand to make the lower filter element shake noisy, and make the tap water clean the filter material, repeat it several times until the water flowing out of the lower filter element is clear. 4.Put the water in the upper container of the water dispenser, unscrew the drain plug, and repeat it several times.

Water dispenser is a household appliance that we use frequently in our daily life, which can provide us with convenient and fast drinking water service. However, after a long period of use, there will be some dirt and impurities accumulation inside the water dispenser, which requires us to clean the water dispenser barrel. Here are a few ways to clean the bucket of a water dispenser.

1.Distilled water cleaning method.

The distilled water cleaning method is a relatively simple and conventional method of cleaning and washing, which only requires adding an appropriate amount of distilled water to the bucket of the water dispenser and cleaning it once or twice. This method is suitable for situations where the dirt is not serious, such as a large amount of dirt, and other cleaning methods need to be selected.

2.Acid cleaning method.

First of all, pour out the water in the bucket of the water dispenser, and prepare the acidic cleaning liquid according to the ratio provided in the manual, then put it in the bucket, start the cleaning program, and pour out the cleaning solution after the cleaning is completed, and then clean the bucket with distilled water.

3.Alcohol cleansing.

This method requires the preparation of baking soda, alcohol, and distilled water. First pour out the water in the bucket, mix it with baking soda and distilled water, pour the mixture into the bucket, start the cleaning procedure, and then clean it with alcohol after the cleaning is completed, and finally clean it with distilled water.

4.Infrared cleaning method.

The water dispenser bucket can be easily cleaned with an infrared cleaner, just follow the instructions. This cleaning method instantly heats the water and residues in the bucket, evaporating them instantaneously to clean the water dispenser bucket.

In summary, cleaning the bucket of the water dispenser is an important health protection measure. And which cleaning method to use needs to be chosen according to the actual situation of the water dispenser barrel and personal preference. No matter what the method, be sure to read the instructions carefully and follow the instructions to ensure the effectiveness and safety of the cleaning process.

1. Introduction to the filter element of the water dispenser.

The filter element of the water dispenser can remove a small amount of solid particles in the liquid or air, which can protect the normal work of the equipment or the cleanliness of the air. Hydraulic oil filter elementWolfman liquid filter element makes the liquid (including crude oil, water, etc.) clean the contaminated liquid to the state required for production and life, that is, to make the liquid reach a certain degree of cleanliness.

Second, how to clean the water dispenser filter.

1. First of all, we should separate the upper and lower parts of the filter element, and then rinse the filter element (ceramic) with clean tap water, and at the same time, we also need to use a toothbrush to brush the surface of the filter element that has not been brushed.

2. Fill the upper filter element with more than half a pot of tap water, after installation, you need to shake the filter element several times, try to shake it up and down, and then pour out the remaining water, which can be repeated several times, so that the micropores of the filter element can become unblocked.

3. The next thing is to clean the lower filter element, fill the filter element with tap water as the above method, and pat the mouth flat up and down with the palm of your hand to make the lower filter element shake, and make the tap water clean the filter material. This is repeated several times until the tap water coming out of the lower filter is clear.

4. Then it is to clean the water dispenser to heat the cooling room, this step is relatively simple, Shenyang water dispenser wholesale * It is recommended that you can put clean water in the upper container of the water dispenser (do not need to fill it), unscrew the drainage plug, use a basin to catch the water flowing out of the drainage hole, and repeat it several times.

3. How often should the filter element of the water dispenser be replaced?

The service life of the filter element is generally about how much water can be filtered, not about time. The amount of water filtered according to the energy. Then according to the daily use of stupid trace town water, you can calculate how much time it can use.

If the water quality is not good, reduce the amount of filtration. Since you didn't say what kind of filter it is, I can't make up my mind. Replacement intervals vary for each type of filter.

PP cotton, usually only three to six months of appearance, activated carbon can be more than a year.