Why is there no mouth on the water dispenser bucket and what should I do if the water dispenser buck

The reason why there is no mouth on the water dispenser bucket is because there are two kinds of water supply buckets used in the water dispenser.

One is a bucket of pure water supplied by a water station (no mouth on it) and the other is a bucket with a filter element of tap water (the opening on the top makes it easy to add tap water).

The principle of water supply for the first type of bucket is very simple, and anyone who has studied physics in junior high school knows it. For example, the reason why the water in the bottle can be poured out is because there is air continuously entering the bottle while pouring the water, as long as the air pressure in the bottle is not less than the air pressure outside the bottle, the water will, if the air pressure in the bottle is less than the air pressure outside the bottle, the water will stop it from flowing out under the action of the air pressure outside the bottle. The outflow of water can be controlled by simply controlling the air flowing into the bottle, and this is done by using the water's own sealing power.

There is also a device similar to a water basin below the water dispenser placing the bucket, when the water in the bucket flows into the basin, and the water rises to just submerge to the mouth of the bucket, the air flowing into the bucket is blocked at this time, the air pressure in the bucket can not change, and the water will not flow out of the bucket again until the water in the basin descends, not flooding the mouth of the bucket, the air can enter again, the water can flow out again, and finally repeat like this. If the bucket is opened on it, the air pressure outside the bucket and the inside of the bucket will be equalized, and the water in the bucket will flow out uncontrollably under the action of gravity. Only the lower bucket can be opened above because it has a water valve.

The second type of bucket uses buoyancy to drive a conical water valve to control the flow of water out of the bucket. It is also when the water in the basin rises to a certain height, and the float with a conical water valve will close the outlet of the bucket under the action of buoyancy. In addition, the higher the water level in the basin, the more the area of the float in the intruding water, the greater the buoyancy of the float, and the greater the buoyancy, the greater the force acting on the conical water valve (equivalent to the more dead the valve is closed).

There is also a cylinder with an opening on one side and a closed cylinder on the other side, and a water control device with a conical water valve connected to the closed side. Since the opening is pressed below, when the water level in the basin rises and squeezes the air in the semi-closed cylinder, then the semi-closed cylinder is pushed upwards under the reaction force of the squeezed air, and the conical water valve is driven to close the water outlet.

The bucket is usually laid flat with the mouth on it. Only when on the water dispenser will it be turned upside down.

If the top is sealed, then the atmospheric pressure will work, and the water in the bucket will not flow out when it is filled with heating gall, and if the top is opened, the water will be pressed out after the air enters the upper mouth, and it will flow out from the place of the interface.

How do you put it when you don't press it? Both ends are pointed.

If the water dispenser bucket doesn't cover, many people will think it's a minor problem, but in reality it can cause a lot of trouble. First of all, if the lid of the water dispenser bucket is not upset, the air entering the water dispenser will change, which may cause the taste and quality of the drinking water to be affected. Secondly, if the water dispenser bucket is not covered, it will also increase the growth of bacteria and other harmful microorganisms, which may have serious effects on human health.

So, once this happens, we need to take immediate steps to prevent these problems from happening.

Here are some feasible ways to solve the problem of water dispenser bucket not liding:

1.Check the size of the bucket.

First, check that the bucket is the correct size to make sure it's a standard size bucket that matches the water dispenser rock. If you are using a bucket of a different size, it will not completely cover the bucket anyway and it may affect the quality and taste of the water.

2.Check the sealing performance of the lid lid.

If the bucket is the correct size, but the lid does not completely cover the bucket, check if there is a problem with the sealing performance of the lid lid. It may be that the lid material is aged or deformed, resulting in improper sealing. At this time, it can be replaced with new barrel lids, which can be purchased at local water stores or **shopping platforms.

3.Adjust the position of the water dispenser parts.

If there is no problem with the bucket and lid but still not completely covering the bucket, it is recommended to adjust the position of the water dispenser parts. Check the spine of the pant for blocked or twisted water pipes and hoses, and if so, fix the problem. In addition, the water dispenser can also be moved appropriately so that it is placed more vertically so that the lid of the bucket is better covered on the bucket.

In short, if the water dispenser bucket does not cover, we should solve the problem as soon as possible. This may require the ruler to adjust the size of the bucket, replace the lid or adjust the position of the trapped parts of the water dispenser. Through these measures, we can guarantee the quality and taste of drinking water and avoid serious health effects due to the growth of bacteria and other microorganisms.

Water dispensers are a daily necessity for people, and their capacity is generally 5 gallons or gallons. Generally speaking, the bucket of the water dispenser has an opening, because the mouth can be connected with the water dispenser, which is convenient for users to take water. However, if the water dispenser barrel has no mouth, then this water dispenser loses its use value.

So, what happened to Sotong regretting that the water dispenser bucket has no mouth?

1.Man-made damage.

The water dispenser barrel may be worn or cracked during use, which is caused by human factors. For example, if the user accidentally touches the wall of the bucket when carrying, using, or storing the bucket, or if the pressure is too high due to improper use, etc.

2.The walls of the barrel expand and contract.

When the temperature changes, the walls of the barrel will expand or contract, which may also cause the barrel mouth to fail.

3.The material cures.

Because drinks that have been stored for a long time or have expired may be frozen in the barrel, these materials will produce a certain chemical reaction, causing the barrel walls to harden and the barrel mouth to deform, causing the barrel mouth to fail.

In order to ensure the normal use of the water dispenser, the following matters need to be done:

1.The use and storage of water dispenser barrels need to be carried out in accordance with the specified requirements, and should not be placed or moved at will.

2.Regularly check the mouth of the water dispenser barrel and replace it in time if any problems are found.

3.Drinking water should be kept clean, water sources should be safe, and drinks that have expired or have a lot of residues should not be used.

In short, if the water dispenser barrel does not have a mouth, it may be caused by a variety of reasons, and it is necessary to find out the cause in time and replace it with a new one, so as not to affect the user's health and water demand.