How can I flush a clogged toilet, and can I flush a clogged toilet with hot water

1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools.

2. Toilet hard object blockage: accidentally fall into plastic brushes, bottle caps, soap, combs and other hard objects when using. This kind of blockage is mild, you can directly use a pipe dredging machine or a simple dredging device to dredge directly, and when it is serious, you must disassemble the toilet to dredge, and this situation can only be completely solved by getting things out.

If the toilet is clogged and needs to be dredged to continue flushing, buy a leather pouch and kick it yourself, if it still doesn't work, find a professional to dredge the sewer.

The toilet is clogged, you need to unclog it. Find a slender wire. Tick it and see if there's anything that catches it? If that doesn't work, buy a bottle of unclogging agent online. Pour half a bottle and go in and have a look. It should be effective.

If the toilet is blocked, it can't be flushed, and the pipe must be unblocked for normal use! You can use the toilet suction cup to suck out the blockage.

Use a water pluck to get through before flushing.

If the toilet is clogged and you want to flush, turn on the faucet and swing it vigorously with a mop until the toilet is open.

To dredge later! Check again to see if there are any other items that may affect the re-clogging before flushing! Otherwise, it will be more troublesome to block the sewer pipe.

How to quickly dredge the toilet after flushing it yourself slowly and flush the stool The toilet is blocked and the toilet is blocked and the stool is not flushed slowly, you can use a pinch against the drain, and it is possible to dredge it with a slam slam. If it doesn't work, seal the upper mouth of the toilet bowl with plastic wrap, then put water, the plastic wrap will bulge, and then press the plastic wrap down with both hands, and the toilet can be dredged.

<>1. Yes. 2. Generally speaking, you can use hot water to flush the toilet after it is blocked, but it should be noted that it is boiling water, not lukewarm water.

3. Before you open the toilet, it is best to try whether you can flush it down to see if the water level in the toilet will drop, if the water level does not drop, or it remains the same, you should stop flushing immediately, otherwise it will cause the water in the toilet to overflow together, which will affect the air at home and the cleanliness of the bathroom, if you can't flush it down at this time, don't worry, at this time, you can first use a basin of boiling water to pour it into the toilet to alleviate this embarrassing situation, because boiling water can quickly dissolve stains.

1. What should I do if the toilet is blocked, and the water can't be flushed?

1.Find a thin wire, twist one end into a hook, and reach into the toilet bowl to spin. You will feel the hook tangled, creating some resistance. When you don't feel anything wrapped around the hook, pull out the wire and repeat until the blockage inside is cleared.

2.Align the toilet plunger with the toilet bowl opening and press slowly and firmly until the toilet hole is completely covered. The toilet plunger must be completely submerged in water to be new, and then continue to push harder.

When you hear the sound of bubbles, you can pull up the toilet plunger to unclog it. If it doesn't work once, you can try it a few more times.

3.The plastic wrap completely covers the toilet bowl, sticking to the edge of the toilet bowl and does not leak. Press the flush button after sticking, wait for the plastic wrap to slowly expand to a certain height, and then gently press down with your hands until the plastic wrap is flush with the toilet.

Remove the crisper bag at the end, and you'll notice that the clogged toilet becomes unobstructed.

Second, what should I do if the toilet is blocked and the water is slow?

1.Pour some plumbing unclogging agent into the toilet bowl and use some unclogging tools to quickly fix the clogged toilet.

2.Prepare a small glass of soda and the other half of white vinegar and pour it down the toilet. When there are no bubbles at all, pour boiling water into it and you can dredge it.

3.Pour an appropriate amount of dish soap and boiling water into the toilet, and then use a leather slap to break up the clogged grease in the toilet. Wait a while, press the flush switch, and the clogged toilet will naturally be unblocked.

Hello, you have to use something that can be as thick as possible, completely crowd the toilet eye, otherwise you can't without enough pressure, there are several ways:

1. The oldest kind of cloth-strip mop, after being dipped in water, can be poked a few times in the eyes of the toilet, which can have an effect.

2. You can use a small basin or something similar, buckle it upside down, press it hard, and you need to wear gloves 3. Find something like wire to dredge.

Hope it works for you, hope

Go to the supermarket to buy a very cheap one, both of the picture can be, you can also have a pump at home, block it with a cloth to pump it in.

The toilet is clogged and can't be flushed, teach you a trick, dredge it quickly, and don't cost a penny.

A toilet plug or toilet plug is the most common tool that comes to mind, and it is also the work that many people will prepare at home. This tool is indeed the first choice, as it can be done 90% of the time.

If you can't unclog the toilet with a wrench, you can go to the kitchen and get some dish soap and squeeze some of it out into the toilet. Wait about 5 to 10 minutes so they have time to move from the sewer to the blockage.

If the toilet is not only clogged, but also full of water, another option can be used. Start by emptying the water inside, but keep some of it. Subsequently, pour a cup of baking soda and a cup of vinegar into the toilet drain.

When vinegar and baking soda are combined, the natural chemical reaction bubbles up and loosens the blockage. After about half an hour, pour some more hot water into it and see if it drains.

If you don't have a wedge at home, you can also try using a plastic water bottle to unclog it. But considering that plastic water bottles are generally not that long, you should wear a rubber glove first. First, remove as much water as you can from the flush toilet.

Fill a large plastic bottle with warm water. Place your thumb on top and place the top of the bottle into the outlet at the bottom of the toilet. Remove your thumb and hold the bottle tightly with both hands.

Squeeze the bottle and let the water drain into the toilet drain. The pressure created in this way may clear the blockage. When doing so, it is best to wear a mask and goggles to protect against splashing water.

Then pour hot water into the toilet, and if the water level drops, the blockage has been cleared.

1. Check whether the toilet is aging After using the toilet, if there is no water or the water pressure is not enough when flushing, the dirt in the toilet will not be flushed away. Slowly, the dirt inside the toilet will block the place where the toilet turns and cause the toilet to clog. If it is determined that the reason for the aging of the toilet is causing the blockage, then there is no need to repair it, and it is better to replace it with a new one!

2. Toilet suction to dredge the toilet blockage, go to the store to buy a toilet suction, put the rubber end against the toilet mouth, and then press down hard, and then lift it up and press it again, so that you can try back and forth a few more times, and the toilet will be dredged under normal circumstances. 3. Use a wire hanger to dredge a wire hanger, bend the hanger, and then put it into the toilet pipe, and then use the hanger to dredge the blocked pipes in the toilet bowl in various ways such as pushing and pulling, twisting, etc. 4. Use vinegar and baking soda to dredge the baking soda and vinegar into the toilet, when pouring the vinegar will make a hissing sound, when the foam bubbles in the toilet bowl stop adding vinegar, pour in 4 liters of hot water to help dissolve baking soda and vinegar, which is also an effective way to dredge the toilet.

5. Use caustic soda to dredge and buy some caustic soda (sodium hydroxide) inside, melt caustic soda with boiling water, pour it into the toilet, and wait for ten minutes for the toilet to be unblocked. However, caustic soda is strongly alkaline and extremely corrosive, so care must be taken when using it. 6. Use pipeline dredging agent to dredge Buy pipeline dredging agent in the store and pour one-third of the dredging agent every 3 minutes.

After pouring it all, wait for the dredging agent to stay for 5 minutes, pour in hot water, and leave it for about 10 minutes to wash with clean water, which can also effectively dredge the toilet. 7. If the above methods are useless, then you need to ask professional dredging personnel to come to the door for dredging, although there will be a certain cost, but this is the most time-saving and labor-saving, and the effect is also the fastest, which can quickly solve the problem of toilet blockage.

How to solve a clogged flushing toilet: If the flush toilet is clogged, the first thing to understand is what causes the toilet to be clogged. Generally, items such as toilet paper and sanitary napkins are easy to cause toilet blockage, for this case, you can first pour boiling water into the pipe, soften the blockage in the waterway pipeline, and wait for the blockage to soften and disperse, and then slowly discharge the sewage.

It can also be solved with the help of a pipe dredging machine or a dredging tool. If it is because you are not careful to make the hair fall out of the toilet cause the drain to clog. At this time, you can use the wire to dredge, make the wire into a hook, and keep shaking it up and down the sewer to make the hair strand around the wire, and then slowly smooth the wire out, and repeat the operation a few more times.

It can also be unclogged by using a hand-cranked unclog.

Summary. Hello! Dear, glad to answer for you!

The solution to a clogged toilet is as follows: 1. Prepare a plastic bag to wrap the whole arm, put the toilet brush into the toilet, and pump it down against the hole to dredge it. 2. Pry the sealing strip under the toilet with a knife, remove the entire toilet base, lift it up to take out the blockage inside, and then seal the toilet with hot melt adhesive again.

Hello! Which Sui dear, I am happy to answer for you! Here's how to fix a clogged toilet:

1. Prepare a plastic bag to wrap the whole arm, put the toilet brush into the toilet, and twitch down against the hole, so that it can be dredged. 2. Pry the sealing strip under the toilet with a knife, remove the entire toilet base, lift it up and take out the blockage inside, and then seal the toilet bowl with hot melt adhesive again.

3. You can choose thick wires, slender sticks such as thin wooden sticks or bamboo strips, etc., and stretch them into the inside of the toilet for dredging.

Method 1: Detergent and hot water.

Drip dish soap down the toilet, add boiling water to melt it, and then rub it with a leather puff. Dish soap breaks down grease clogging the toilet bowl, while hot water enhances the dissolving effect. After a while, press the flush switch, and the clogged toilet will naturally be unblocked.

Method 2: Use plastic wrap.

Seal the mouth of the toilet bowl with plastic wrap, basically seal it, press the flush button, the plastic wrap will slowly bulge, and then press the bulging part of the plastic wrap with the palm of your hand to dredge the pipe with air pressure.

When pressing, pay attention to the moderate force, so that after pressing a few times, you hear the sound of running water, that is, it is opened.

Method 3: Toilet suction cups

1. If you are sure that it is a solid object that is blocking the toilet, such as small toys, plastic bottle caps, etc., please skip this method, because the leather roller is an air pressure dredging, and it is difficult to solve the toilet blockage caused by solid objects.

2. It is best to use a large plunger rubber leather pouch, whether it is spherical or folded rubber. Try not to buy cheap suction cups, the air pressure is too small, the air leakage is serious, and it is usually useless. The larger the pimple, the higher the air pressure.

The shape of the skin pouch ensures that it does not leak when you push it down, and if the skin pinch does not form a seal, you can use an old rag to pad under the leather pinch to prevent air leakage. Rinsing the skin bowl with hot water before use can effectively soften the skin and help form a seal.

3. Aim the skin with the urinal drain and press hard. Be sure to aim at the drain, and the skin pouch should be immersed in water to function effectively. If there is too little water, you need to add some water to the urinal.

After pressing, quickly pull it back and use air pressure to dredge. It may take many repeated attempts to unclog the toilet, so don't give up easily.

Method 4: Simple Dredging Device.

1. Prepare a wire that can be stirred, if there is none, you can disassemble the iron hanger, and then wrap a section of wire with gauze to prevent scratching the inner wall of the toilet.

2. Insert one end of the dredge into the drain of the urinal and push it down until you feel the blockage.

3. Turn the dredge handle and try repeatedly until the blockage is removed.