What to do if the toilet tank does not water, what is the reason why the toilet tank does not water

The solution to the toilet tank not watering is as follows:1. Close the angle valve first, remove the angle valve with a tool, and check whether the angle valve is rusty or scaled.

2. After the angle valve is disassembled, replace it with a new angle valve, and there is a filter screen under the toilet tank, remove the filter screen, and then rinse it with clean water.

When buying a flush toilet, you should pay attention to the appearance gloss of the flush toilet, generally the higher the gloss, the better the quality, and the longer the service life.

The toilet tank does not water as follows:1. Check whether there is tap water.

Turn on other faucets, check if there is running water, and rule out external causes first.

2. Check whether the angle valve is closed.

Check that the toilet valve has not been accidentally closed and that the angle valve is open.

3. Check whether it is blocked by scale.

Take out the filter inside the tank key and see if there are too many impurities, blocking the filter and causing tap water to not come in. If so, clean the filter and you're good to go.

4. Check whether there is a problem with the water tank button.

Check if there is a problem with the spring of the tank button, and if it is stuck, just flip it. If the spring of the tank button loses its elasticity, go to the hardware store and buy one to replace it, and the water can be restored to normal intake.

5. Check whether there is a problem with the water inlet valve.

Open the water tank and toggle the water inlet valve to see if water can be entered. Check whether the water inlet valve is stuck and the water cannot be entered.

The toilet tank does not water because the water pressure is too low. Many of the installations are pumped, and if the water pressure is not enough, it will be difficult to get water. The lack of water pressure may be due to the high floor or the overall water pressure is not enough, in which case pressurization equipment can be installed.

It may also be caused by the valve being opened smaller, and the valve can be turned larger. If there are many impurities in the water, there will also be a problem of not being able to water. In this case, the water parts of the equipment can be replaced, and it should be noted that some water should be drained before installation to allow impurities to be discharged.

Toilet water supply principleThe principle of toilet filling is that when you pull the handle on the tank to flush the flush toilet, the starting lever in the tank will be lifted. This lever pulls the rope upwards, which in turn pulls up the plug or rubber cover at the bottom of the tank, and if the opening of the flush valve is open, the water in the tank will flow through the raised plug and into the bucket below. In this way, the water level of the barrel tank will be higher than the water level in the elbow.

When the water gushes out of the tank, the float floating on the surface of the tank will descend and pull the float arm downward, thereby raising the plunger of the float valve device so that the water flows into the tank again. The water always flows low, so the water in the tank pushes the water in the bucket tank, which flows into the drain, creating a siphon effect that takes everything in the bucket tank away. When all the water in the tank has flowed away, the air is sucked into the elbow and the siphoning stops.

At the same time, the tank ball plug falls back into place, closing the opening of the flush valve.

The toilet tank does not go to water:

1. It may be that the water pressure is relatively low, resulting in the inability to supply water normally. Or because you live in a high-rise and are in the peak period of water consumption, the water pressure in your home is low, and you can't get water.

2. Either because the inlet valve of the water tank is not opened, or it is only half opened, it will also cause the water tank to not be watered, so it is necessary to open the valve in time.

3. If the triangle valve in the water tank is blocked, there will also be no water supply. At this time, you need to use a tool to remove the triangle valve, clean up the internal stains, and then install the triangle valve back.

4. There is another possibility, that is, the float is damaged. At this time, you need to check the float, if it has sunk to the bottom, it means that the float has been damaged and needs to be replaced with a new one.

Toilet tank to do maintenance work:

When the toilet is in use, it is necessary to do a good job of cleaning and maintenance, so as to avoid the breeding of bacteria, affect the health of the user, and can prolong the service life of the toilet. For daily cleaning, lemon water can be used, which has a good sterilization effect.

There can be a variety of reasons why the toilet bowl does not go down and the tank does not go water, and the common ones are several that are stuffy in the state

Faucet not open: Check if the faucet is on.

Clogged pipes: Check the pipes for blockages.

Water Valve Closed: Check if the water valve is closed.

Problems inside the tank: Check if the water valve and float inside the tank are working properly.

Low water level due to water leakage: Check toilets and cisterns for water leaks, which can cause the water level to be too low and not fill properly.

Solution: Check whether the water source is normal.

Clean the pipes. Check the water valve to make sure it is open.

Check whether the water valve and float inside the water tank are working properly, and replace them in time if they are not normal.

Check the toilet bowl and cistern for leaks and fix them in time.

There may be several reasons why the toilet bowl does not go to water and the tank does not go water:1The water valve is not open or blocked:

Check whether the water valve is open, if it is already open, it may be that the inside of the water valve is blocked, and Qi Shu needs to be cleaned or replaced. 2.Clogged water pipes:

Check that the water pipes are not clogged and if there are blockages that need to be cleaned or replaced. 3.Internal failure of the tank:

Check if there is any fault inside the tank, such as damaged or aging parts inside the tank that need to be replaced. 4.Pump failure:

If the toilet does not go to water, it may be that the Tuanziji water pump is faulty and needs to be replaced. 5.Insufficient water pressure:

If the water pressure is insufficient, the toilet and the water tank may not be able to fill the water, so it is necessary to check whether the water pressure is normal. The above are the common reasons why the toilet bowl does not go to water and the water tank does not go to water, which need to be investigated and dealt with according to the specific situation.

What should I do if the toilet tank doesn't go water? I believe that many families have encountered the phenomenon that the toilet tank does not have water, so what should I do if the toilet tank does not have water? Let's introduce it to you.

First, the method of putting water on the toilet:

1. Fill a basin of tap water with a basin, then add an appropriate amount of high-concentration silver washing powder or dish soap, stir to dissolve, and pour it into the sewer. This will serve as a cleaning function and keep the pipes clean.

2. Pour half a cup of cooked baking soda into the drain, then pour another half cup of vinegar and quickly cover the lid. This not only removes odors, but also has a sterilizing effect.

3. Put the toilet paper on the edge of the sink, then throw the cigarette butt in, use the heat of the cigarette butt to soften the toilet paper, and finally rinse it down with water.

4. Mix the burned honeycomb cinders with cement and sand after crushing them, and then pour them into the sewer. This material has good water absorption, and it can also absorb the grease in the pipes, which is good"Ring in the lead protector"。

5. Fill the container with water, put it in the toilet that needs to be cleaned, close the lid and soak for 10 minutes. If you have enough time, you can soak it for a while longer so that the dirt is easier to clean.

The toilet is an indispensable device in our home and brings many conveniences to our daily life, but after a long period of use, there will be problems and people are overwhelmed. So what to do if the toilet tank doesn't water? What should I pay attention to when using the toilet?

First of all, see if it is caused by loose or rusty spring of the water tank button, if so, replace the water tank button; Secondly, see if the water pressure is not enough, if so, you can add an additional pump, or avoid the use of the peak period of cautious closure or spare some water next to it; Finally, check whether the water tank inlet valve is blocked, if there is a blockage, just clean and dredge.

What to pay attention to when using the toilet:

1. First of all, the toilet bowl should not be placed in a place where the sun can shine, and it should not be too close to the heat source or oil smoke, otherwise it will cause the toilet to change color. At the same time, the surface of the toilet bowl should not collide with hard or heavy objects, otherwise it will cause scratches or cracks on the surface of the toilet bowl.

2. Secondly, you should pay attention to the cleaning of the toilet bowl, and you can use a soft cloth to clean the lid and seat of the toilet, but you can not use a strong acid and alkali detergent, otherwise it will cause the surface of the toilet to be corroded. Moreover, if the cover plate is installed in a place without a water tank, people cannot lean back when using it, and the cover plate will be broken. At the same time, when opening and closing the cover, the spine filial piety should be light to avoid collision with the water tank and cause breakage.

3. Finally, when the toilet is in use, the contact surface between the base and the ground should be sealed with glass glue, and if the metal seat hinge is used, it is necessary to avoid acid and alkali solvents adhering to it, otherwise it is easy to rust. In addition, in normal use, do not throw newsprint, urine pads, sanitary napkins and other items into the toilet to avoid clogging. If you accidentally fall into it, you can use skin inhalation to remove the debris.

Summary: The above is the relevant content of what to do if the toilet tank is not watered and what to pay attention to when using the toilet, I hope to help friends in need.

Summary. Check that the faucet is on. If the faucet is not turned on, the toilet tank will not be flooded.

You can try turning on the faucet and see if that fixes the problem. Check for clogged water pipes. If the water pipe is clogged, the toilet tank will not be flooded.

You can try pushing the plug open with your hands or pliers to see if that fixes the problem.

Check that the faucet is on. If the faucet is not turned on, the toilet tank will not be flooded. You can try turning on the lead vibrator faucet and see if that fixes the problem.

Check for clogged water pipes. If the water pipe is clogged, the toilet tank will not be on the toilet tank to keep the water back. You can try rolling the plug into the water pipe with your hands or pliers to see if that fixes the problem.

You've done a great job! Can you elaborate on that?

6. The problem of toilet not being watered can be solved by adjusting the high rock chain of the pontoon, and the toilet tank cover will be pushed to the inlet valve, and the inlet valve needs to be adjusted in azimuth until the hail buoy or float of the inlet valve moves freely, and the water generally cannot enter if the floating bucket is stuck.