Don t worry about the moldy refrigerator seal, what to do?

When the sealing strip on the refrigerator door is moldy, we can use toothpaste to help clean it. Apply the toothpaste to the moldy part of the seal, wait a few moments, gently wipe with a towel or soft cloth, and then rinse with water.

Use toothpaste: Apply the toothpaste to the moldy area of the adhesive strip, wait for about 3 minutes, gently wipe it with a soaked towel, and then wash it with water to improve the moldy situation.

The refrigerator seal should be removed and replaced with a new one, so that there is no need to worry.

If the seal becomes moldy or is not installed correctly, it will affect the use and energy consumption of the refrigerator, and even cause the food inside to spoil. Therefore, if the rubber strip has mold, it is very important to clean it.

The first step is to turn off the power of the refrigerator and then take out all the food in the refrigerator. Then we use a basin, then pour an appropriate amount of warm water into the basin, then add a little baking soda to the water and stir it well. Soak the towel in water, and then wipe the dirty parts of the refrigerator and the moldy adhesive strips directly, and you will find that the stain removal effect is very good.

If the seal has been deformed,It is recommended that it is best to change one,My Haier refrigerator has been used for a long time,A little deformed,In order not to spread air conditioning outside, contact the after-sales service to change one,The quality of Haier's home appliances is still trustworthy,The service is good。

After the refrigerator is moldy, you can use toothpaste to wipe it, or you can also use alcohol, like the refrigerator is not cleaned for a long time, then there will be some mold, you can directly use toothpaste to apply it to the mold, wait for 5 minutes to 10 minutes, and then wipe it with a damp cloth, after wiping, you will find that all the mold on the refrigerator has been removed, and the seal of the refrigerator is also easy to mold, and you can also use toothpaste when cleaning.

If the refrigerator seal is a little moldy, you can use the solution of washing powder to wipe the seal well, then heat it with a hair dryer, and slowly dry it, then the seal will recover its elasticity and be relatively clean.

Dilute bleach and water in 1:99 parts, then soak in a towel, then pinch and pinch dry, and gently wipe the seal until it is clean, which can not only remove mildew, but also make the seal white and shiny.

If the seal of the refrigerator is moldy now, you can take the seal off, clean it well, and then use a hair dryer to blow it hot for her, and then put it up in the refrigerator, so that the heat expands and shrinks, and the heat expands and contracts, and it is very strong.

The refrigerator seal is a little moldy, you can scrub it with dish soap, and then rinse it with water.

In daily life, we may sometimes find that the inner sealing strip of the refrigerator seems to be poisonous, which is very puzzling, the refrigerator is obviously used to store fresh food, why the refrigerator sealing strip itself will be moldy, the following will introduce to you why the refrigerator sealing strip has mildew, what to do if the refrigerator sealing strip has mildew.

Why do refrigerator seals get moldy.

Let's take it step by step, first of all, let's get to know the seal of the refrigerator. The seal is an indispensable part of the refrigerator, which is compressively elastic, not easy to deform and age, and plays an absolute role in the sealing of the refrigerator; At the same time, it plays the role of cushioning, shockproof and noise reduction, and protects the refrigerator well.

In order to improve the sealing and cushioning effect, the seal is designed with multiple layers (tongue-shaped buckles), and the edges will be folded; A magnetic strip is also installed on the inside, which securely seals the refrigerator and adsorbs metal dust particles.

Then let's see why the seal is moldy. Because the edge of the seal is wrinkled, and at the same time, it has some adsorption capacity, which makes it easy to trap dirt and dirt, forming a "soil" for mold growth. The refrigerator is constantly opening and closing, and the seals that alternate between hot and cold are very easy to absorb water vapor and bring moisture to the growth of mold.

At this point, the folds along the edge of the seal, air, soil and water are available, coupled with the cool environment around the refrigerator, it is easy to grow mold. Between the air and the refrigerator, there will often be mold in and out, and over time, the refrigerator seal will grow mold, spots and black, which is annoying.

How to remove mold spots on the refrigerator seal.

1. First of all, prepare a small bowl the size of a daily meal, pour a little white vinegar into the bowl, and then add a little toothpaste, just the same amount as you usually brush your teeth, add half a bowl of water, the ratio of water and white vinegar is about three to one.

2. Then, stir with chopsticks, and after the chain-cracked toothpaste is touched, take out a wet paper towel, put it in a bowl and soak it out.

3. Take out a small card-shaped item such as a clothing tag or a waste bank card, use a soaked wet paper towel to wrap the small card with this Zen tablet, use this to clean the refrigerator seal, and scrape it directly with the edge of the card along the gap in the seal, and you can easily wipe it clean with a few simple clicks. The four sides of this card can be used, if one side of the wet paper towel becomes dirty, you can also change the other side to continue, so the use rate is greatly improved, generally the seal of a refrigerator door with two wet wipes can be, much better than cotton swabs.

1. Toothpaste to help, when the sealing strip on the refrigerator door is moldy, we can use toothpaste to help clean it. First apply the toothpaste to the moldy area of the sealing strip, wait for a while, gently wipe it with a towel or soft cloth (be careful not to pull the sealing strip too hard to prevent deformation and loose sealing), and then wash it with clean water.

2. Vinegar comes to help, we can use daily vinegar to clean the moldy sealing strip of the refrigerator, and the scum can also clean the inside of the refrigerator, which can not only remove stains and mildew, but also disinfect and kill the skin and bacteria. It is also safe and effective than placing a refrigerator deodorant.

3. Diluted Clorox bleach, sometimes the sealing strip will not only be moldy, but also turn yellow and black with peculiar smell, at this time we can use diluted Clorox bleach to clean. Dilute Clorox bleach with water at a ratio of 1:99 and wipe with a towel wet.

After wiping, the seal will be white, shiny and odorless.

1. Refrigerator users can apply toothpaste to the refrigerator sealing stripThen it can be wiped with a towel and a rag for about a minute, and then cleaned with clean water, so that the dirt caused by the mold of the refrigerator seal will be completely removed.

2. Vinegar can also be used to clean off the mold of the refrigerator seal, there will be a chemical reaction between the ingredients in the inner vinegar and the mildew, and after cleaning it with vinegar, be sure to wipe its residue clean. Vinegar not only has this effect, but also kills bacteria on the refrigerator seal.

3. You can use an old toothbrush to dip a little dish soap to remove the mold of the refrigerator sealIn this way, the cleaning effect is also more thorough, and at the same time, it can also remove the odor on the refrigerator seal, which can be described as killing two birds with one stone, you may wish to give it a try.

4. Bleach is mixed with water in a ratio of 1:99The mixture is then applied to the refrigerator seal, which not only cleans away the mold from the paint, but also refreshes the seal that has been yellowing for a long time.

Precautions for refrigerator maintenance

The refrigerator should be cleaned regularly (at least 2 times a year). When cleaning the refrigerator, first cut off the power, use a soft cloth dipped in water or dish soap, scrub gently, and then dip it in water to wipe off the dish soap.

In order to prevent damage to the outer layer of the box and the plastic parts inside the box, do not clean the refrigerator with laundry detergent, detergent, alkaline detergent, Tianna water, boiling water, oil, brushes, etc.

When the accessories in the box are dirty and dirty, they should be removed and cleaned with water or detergent. The surface of the electrical parts should be wiped with a dry cloth.

After cleaning, plug the power plug firmly in and check that the temperature controller is set in the correct position.

When the refrigerator is not in use for a long time, the power plug should be unplugged, the inside of the box should be wiped clean, and the door of the box should be closed after the box is fully dry.

Reason: The refrigerator is a low-temperature and humid place, and if the grooves of the sealing strip are not cleaned regularly, it is easy for bacteria to grow and mildew.

Cleaning method: use toothpaste: apply toothpaste to the moldy area, then wipe it with a towel, and finally wash it off with water;

Use vinegar: Cleaning the sealing strip of the refrigerator with vinegar can clean off mildew and play a role in disinfection;

Use bleach: Dilute bleach and water at a ratio of 1:99 and wipe the moldy area with a towel to remove it.

The first trick:

Copy toothpaste to help.

When the seal on the refrigerator door is moldy, we can use toothpaste to help clean it. First of all, apply the DAO toothpaste to the moldy area of the sealing strip, wait for a while, gently wipe it with a towel or soft cloth (be careful not to pull the sealing strip too hard to prevent deformation and loose sealing), and then wash it with clear water.

The second trick: vinegar to help.

We can use daily vinegar to clean the moldy sealing strip of the refrigerator, and we can also clean the inside of the refrigerator, which can not only remove stains and mildew, but also disinfect, sterilize and remove odor. It is also safe and effective than placing a refrigerator deodorant.

The third trick: diluted Clorox bleach.

Sometimes the seal will not only become moldy, but also turn yellow, black and smelly, so we can use diluted Clorox bleach to clean it. Dilute Clorox bleach with water at a ratio of 1:99 and wipe with a towel wet.

After wiping, the seal will be white, shiny and odorless.

It is best to wipe the inside of the refrigerator once a week to avoid peculiar smells, if there is a peculiar smell, you can place a few lemon slices, which can absorb the peculiar smell and improve the smell inside the refrigerator, and when the refrigerator spills soup and other things, it should be scrubbed clean in time.