How should I clean the refrigerator seal if it is a little moldy?

If the seal becomes moldy or is not installed correctly, it will affect the use and energy consumption of the refrigerator, and even cause the food inside to spoil. Therefore, if the rubber strip has mold, it is very important to clean it.

The first step is to turn off the power of the refrigerator and then take out all the food in the refrigerator. Then we use a basin, then pour an appropriate amount of warm water into the basin, then add a little baking soda to the water and stir it well. Soak the towel in water, and then wipe the dirty parts of the refrigerator and the moldy adhesive strips directly, and you will find that the stain removal effect is very good.

If the seal has been deformed,It is recommended that it is best to change one,My Haier refrigerator has been used for a long time,A little deformed,In order not to spread air conditioning outside, contact the after-sales service to change one,The quality of Haier's home appliances is still trustworthy,The service is good。

After the refrigerator is moldy, you can use toothpaste to wipe it, or you can also use alcohol, like the refrigerator is not cleaned for a long time, then there will be some mold, you can directly use toothpaste to apply it to the mold, wait for 5 minutes to 10 minutes, and then wipe it with a damp cloth, after wiping, you will find that all the mold on the refrigerator has been removed, and the seal of the refrigerator is also easy to mold, and you can also use toothpaste when cleaning.

If the refrigerator seal is a little moldy, you can use the solution of washing powder to wipe the seal well, then heat it with a hair dryer, and slowly dry it, then the seal will recover its elasticity and be relatively clean.

Dilute bleach and water in 1:99 parts, then soak in a towel, then pinch and pinch dry, and gently wipe the seal until it is clean, which can not only remove mildew, but also make the seal white and shiny.

If the seal of the refrigerator is moldy now, you can take the seal off, clean it well, and then use a hair dryer to blow it hot for her, and then put it up in the refrigerator, so that the heat expands and shrinks, and the heat expands and contracts, and it is very strong.

The refrigerator seal is a little moldy, you can scrub it with dish soap, and then rinse it with water.

1. Refrigerator users can apply toothpaste to the refrigerator sealing stripThen it can be wiped with a towel and a rag for about a minute, and then cleaned with clean water, so that the dirt caused by the mold of the refrigerator seal will be completely removed.

2. Vinegar can also be used to clean off the mold of the refrigerator seal, there will be a chemical reaction between the ingredients in the inner vinegar and the mildew, and after cleaning it with vinegar, be sure to wipe its residue clean. Vinegar not only has this effect, but also kills bacteria on the refrigerator seal.

3. You can use an old toothbrush to dip a little dish soap to remove the mold of the refrigerator sealIn this way, the cleaning effect is also more thorough, and at the same time, it can also remove the odor on the refrigerator seal, which can be described as killing two birds with one stone, you may wish to give it a try.

4. Bleach is mixed with water in a ratio of 1:99The mixture is then applied to the refrigerator seal, which not only cleans away the mold from the paint, but also refreshes the seal that has been yellowing for a long time.

Precautions for refrigerator maintenance

The refrigerator should be cleaned regularly (at least 2 times a year). When cleaning the refrigerator, first cut off the power, use a soft cloth dipped in water or dish soap, scrub gently, and then dip it in water to wipe off the dish soap.

In order to prevent damage to the outer layer of the box and the plastic parts inside the box, do not clean the refrigerator with laundry detergent, detergent, alkaline detergent, Tianna water, boiling water, oil, brushes, etc.

When the accessories in the box are dirty and dirty, they should be removed and cleaned with water or detergent. The surface of the electrical parts should be wiped with a dry cloth.

After cleaning, plug the power plug firmly in and check that the temperature controller is set in the correct position.

When the refrigerator is not in use for a long time, the power plug should be unplugged, the inside of the box should be wiped clean, and the door of the box should be closed after the box is fully dry.

The refrigerator is an indispensable household appliance in our lives, which can help us preserve food, avoid food spoilage, and protect the health of our family. However, because refrigerator seals are in a humid, airtight environment, they are susceptible to mold attack, resulting in mold, which can pose a risk to home health if not cleaned in time. Below, we will introduce some ways to clean the moldy refrigerator seal.

1.Ginger cleansing.

First of all, use a clean cloth or sponge to wipe the mold on the refrigerator seal, then cut the ginger into small pieces, wipe the small pieces of ginger along the seal, and at the same time add some white vinegar to make the moisture dry. This kills mold and removes odors.

2.Detergent cleaning method.

This cleaning method is suitable for more serious mildew situations, first remove the mold on the refrigerator seal, and then you can use some mild detergent, pour it into water, fully dissolve, and soak the seal. This removes stubborn mildew and allows the seal to dry before wiping it clean with a clean cloth.

3.Alcohol cleansing.

Add a small amount of alcohol to the cleaning process, which effectively removes mold and kills bacteria. First, clean the refrigerator seal with a dry cloth and wipe it thoroughly, then use a brush to dip some alcohol and gently wipe the mold on the seal. Remember not to overuse alcohol to prevent damage to the seal.

4.Soda cleaning method.

Sparkling water is a common cleaning agent, it can kill bacteria and roots, and it also has a good effect on the odor inside the refrigerator. Dissolve the baking soda powder in hot water until the concentration is moderate, then dip the soda with a brush or a chierli sponge, wash the inside of the seal and refrigerator thoroughly, and finally wipe it clean with water.

In conclusion, there are many ways to clean a refrigerator seal for mold, but different situations require different methods. In everyday life, it is important to keep the refrigerator dry and do not let water droplets stay on the seal, so that mold growth can be prevented. At the same time, clean your refrigerator regularly to keep it clean and hygienic.

Here's how:

1. Clean with toothpaste. Start by squeezing the toothpaste, apply it to the moldy area of the strip, wait a few minutes, and wipe it with a damp towel or paper. Rinse with tap water.

2. Clean with alkaline-containing substances. We can clean it with alkaline substances, similar to alkaline noodles. Pour a spoonful of alkaline noodles on top of the moldy strips, and after a while, pour some tap water and wipe it.

3. Wash with alcohol. Use chopsticks dipped in alcohol to wipe back and forth on the moldy part of the rubber strip of the refrigerator, and then wipe it evenly with a paper towel, we can see that it is stained with stains. Then wash with clean water and you're done.

4. Wash with vinegar. We all know that vinegar is an acidic substance, and it can be reacted with moldy substances, rubbed back and forth on the moldy area with a cloth dipped in vinegar, and finally washed with water.

5. Laundry detergent cleaning. We know that household laundry detergent can remove stains, so after washing the clothes, we can use laundry detergent to wipe the mold.

6. Detergent. Detergent is generally used to wash dishes, of course, it can play a role in sterilization and cleaning, which is also a quick way.

Method 1: You can apply toothpaste to the moldy part of the sealing strip of the refrigerator, wait for about 1 minute, we can gently wipe it with a clean towel, and then wash it again with water, then you will find that the previous mold is gone, and the refrigerator is as clean as new.

Method 2: Vinegar can also clean off the mildew of the refrigerator seal, because the composition of vinegar and mildew will have a chemical reaction, we must carefully wipe it clean, and vinegar also has the effect of sterilization.

The above are the two cleaning methods for moldy refrigerator seals, I hope it can help you, thanks (

We all have old toothbrushes that we don't use at home, and you can use a toothbrush dipped in dish soap to scrub the mold, in fact, this effect is more obvious, and the odor of the refrigerator will also be effectively removed, you can try it. You can also use bleach to clean, pay attention to the ratio of it to water is 1:99, and evenly apply the mixed liquid to the moldy area, and the mold on the refrigerator seal will be removed.

1. Toothpaste cleaning method: squeeze the toothpaste on the moldy position on the Mi Li Kai seal, stay for 3 5 minutes, wipe gently with a soft cloth, and pay attention to gently wipe when cleaning, do not use force, so as to avoid the seal is not strict, and then use clean water to clean the sail.

2. Vinegar cleaning method: you can soak the towel in vinegar, then take out the towel, wipe it on the moldy position, and also use it to clean the inside of the washing machine, which can play the role of decontamination and mildew removal, and also has the effect of sterilization and odor removal.

3. Clorox bleach cleaning method: the inner seal of the washing machine will be moldy after a long time, and there will be blackening, and even the smell will appear in serious cases, in this case, it will be difficult to clean, you can use Clorox bleach to clean, the ratio of Clorox bleach and water is 1:99, and then wipe it lightly with a towel, and you can find that the refrigerator seal is white and bright after wiping.

4. The wonderful use of the hair dryer: many people will find that the sealing strip is somewhat deformed after cleaning the refrigerator sealing strip, and the sealing is not tight, so you need to use a hair dryer to help the sealing strip restore its original state, the operation is very simple, that is, use which laugh to blow the hot wind sealing strip, and it will return to its original state after blowing it for a few minutes.

The first trick:

Copy toothpaste to help.

When the seal on the refrigerator door is moldy, we can use toothpaste to help clean it. First of all, apply the DAO toothpaste to the moldy area of the sealing strip, wait for a while, gently wipe it with a towel or soft cloth (be careful not to pull the sealing strip too hard to prevent deformation and loose sealing), and then wash it with clear water.

The second trick: vinegar to help.

We can use daily vinegar to clean the moldy sealing strip of the refrigerator, and we can also clean the inside of the refrigerator, which can not only remove stains and mildew, but also disinfect, sterilize and remove odor. It is also safe and effective than placing a refrigerator deodorant.

The third trick: diluted Clorox bleach.

Sometimes the seal will not only become moldy, but also turn yellow, black and smelly, so we can use diluted Clorox bleach to clean it. Dilute Clorox bleach with water at a ratio of 1:99 and wipe with a towel wet.

After wiping, the seal will be white, shiny and odorless.

It is best to wipe the inside of the refrigerator once a week to avoid peculiar smells, if there is a peculiar smell, you can place a few lemon slices, which can absorb the peculiar smell and improve the smell inside the refrigerator, and when the refrigerator spills soup and other things, it should be scrubbed clean in time.