What causes the refrigerator seal to always mold, and what can be done to remove it?

Now basically every household has a refrigerator, and after a long time, the refrigerator seal.

It's always moldy, what causes it? I think there are many people who don't know the specific cause, so I will analyze the cause of mold with you.

PVC resin and plasticizer are used for the sealing ring.

etcContains a little bit of the nutrients needed for mold growth and reproductionIn the refrigerator, in fact, the humidity is relatively good, and the local environment inside is relatively closed, which just provides a good environment for mold growth, so it is moldy. Of course, if you want to get rid of these moldy things, there are still many ways, such as:

1).The door mat of the refrigerator is a place where dirt can easily accumulate, especially the grooves of the door mat, if there are black dirt spotsCan be applied with an old toothbrushDish soapWipe and dry with a dry cloth。If the door mat is left unattended, it will lose its elasticity and magnetism, and reduce the freezer function.

Therefore, on average, it should be wiped once every two months with a mild detergent.

.Scrub with detergent first, then wipe with a towel or rag to dry completely before putting things away. If you can, buy 1 bottle of 'absolute ethanol', wear rubber gloves and use a clean rag dipped in absolute ethanol to wipe the refrigerator completely.

Sponge with vinegar or dish soap can be used to clean the inside of the refrigerator to not only wipe away stains, but also to fight bacteria. Suggestion: If the door of the refrigerator is moldy, it is generally a sealing strip, and it is good to remove it for liquidation.

The sealing strip will age for a long time, even if it is liquidated, it is not easy to clean, especially in the groove, and the 4 corners shrink and deform, resulting in the temperature loss of the refrigerator door, resulting in electricity consumption, if the aging is serious, it is better to change 1 sealing strip.

Overall, mold in refrigerator seals is a very common thing. Therefore, if such a situation occurs in the refrigerator at home, you must clean it up in time or replace it with a new one, because some of the mold produced may be toxic and may affect your life safety.

The sealing ring of the refrigerator is more prone to mold because it is in a dark and damp state for a long time. We can remove the sealing ring of the refrigerator and clean it regularly according to the tutorial on the Internet.

In this way, the main thing about the mold of the sealing ring is that there is too much moisture and moisture in the refrigerator, so it will cause such a phenomenon, which can be removed with a professional cleaning brush.

If you want to remove it, the best way is to use a professional detergent to clean the effect is still relatively good, and you should usually pay attention to cleaning the refrigerator once a week.

RefrigeratorSealsThe mold cleaning method is as follows:

1. To clean the toothpaste, first apply the toothpaste to the moldy part of the sealing strip, wait for a while, gently wipe it with a rag (do not pull the sealing strip hard to prevent deformation and the seal is not tight), and then clean it with water.

2. Vinegar. Show up to help, we can use daily vinegar to clean the moldy sealing strip of the refrigerator, and we can also clean the inside of the refrigerator, which can not only remove stains and mildew, but also disinfect, sterilize and remove odor. It is also safe and effective than placing a refrigerator deodorant.

3. Alcohol, first pour 150ml of alcohol into a bowl, then wrap the paper towel around a small fork and keep it firm, and then use the paper towel on the fork to put it into the container and fill it with alcohol. Press and wipe the paper towel along the gap of the sealing strip repeatedly, and after a while, you will see the blackened paper towel, which is stained with dirt and mold in the gap. Repeat this until the tissue is no longer black.

4. Magic wipe or buy special mold cleaner, you can buy it online, and the one that can be removed by applying it to it is good to use it with labor-saving effect.

5. You can use an old toothbrush to get some dish soap.

to remove mildew from the refrigerator seal, so that the cleaning effect is more thorough, and at the same time, it can also remove the odor on the refrigerator seal.

6. Bleach is mixed with water in a ratio of 1:99, and then the mixture is applied to the refrigerator seal, which can not only clean off the mildew on the paint, but also make the yellowed seal look new for a long time.

How to clean the mold of the refrigerator seal, the refrigerator is one of the indispensable appliances. Repeated opening and closing will cause changes in the environment in the refrigerator, water vapor and debris in the air will gradually accumulate in the refrigerator due to long-term use but neglect of maintenance, how to clean the mold of the refrigerator sealing ring?

Apply with toothpaste

First, apply the toothpaste to the refrigerator seal, let it stand for one minute, wipe it with a towel and rag, and then clean it with clean water to remove the dirt caused by the mold of the refrigerator seal.

Apply with vinegar

Use an old toothbrush to dip some vinegar and apply it to the mold on the refrigerator seal, as the vinegar and the ingredients in the mold will have a chemical reaction that can kill the bacteria on the refrigerator seal. After cleaning with vinegar, be sure to wipe its residue clean.

Disinfectant application method

When cleaning, use a clean cloth dipped in the original solution of the venom and wipe all the gaps in the sealing strip. This not only cleans the surface of the sealing strip, but also thoroughly sterilizes the sealing strip.

Dish soap application

You can use an old toothbrush to get a little dish soap to remove mildew from the refrigerator seal, which is also more thorough, and can also remove the odor on the refrigerator seal, killing two birds with one stone.

Bleach application

Use bleach to mix with water in a ratio of 1:99 and then apply the mixture to the refrigerator seal, which not only cleans off the mold on the paint, but also makes it yellow for a long time. The seal has a new look.

Apply with alcohol

The effect of rubbing it with alcohol is better, not only to kill viruses, remove germs and remove greasy, but also to easily remove pigmentation, which is much better than liquor.

It's as simple as using a toothbrush and toothpaste to brush off the mold.

1. Take 500 grams of fresh oranges, after eating oranges, wash and dry the orange peel, disperse them in the refrigerator, 3 days later, open the refrigerator, the fragrance is fragrant, and the smell is completely gone.

2. Lemon team flavor Cut the lemon into small slices and place it on each layer of the refrigerator to remove the odor.

3. Tea deodorization Put 50 grams of flower tea in a gauze bag and put it in the refrigerator to remove the odor. After 1 month, the tea leaves are exposed to the sun, which can be used repeatedly and the effect is very good.

4. Maifan Stone Deodorization Take 500 grams of Maifan Stone, sieve off the powder particles, put it into a gauze bag, place it in the refrigerator, and the odor can be removed after 10 minutes.

5. Vinegar deodorization Pour some vinegar into an open glass bottle and put it in the refrigerator, and the deodorization effect is also very good.

6. Baking soda deodorization Take 500 grams of baking soda (sodium bicarbonate) and pack them in two wide-mouth glass bottles (open the cap) and place them in the upper and lower layers of the refrigerator to remove the odor.

7. Deodorize rice wine Use 1 bowl of rice wine and put it on the bottom layer of the refrigerator (to prevent it from flowing out), and the odor can be removed in 3 days.

8. Sandalwood soap deodorization Put 1 piece of sandalwood soap with the wrapping paper removed in the refrigerator to remove odors.

1. First prepare a damp cloth.

2. Pour a spoonful of baking soda over a damp cloth.

3. Spread the baking soda evenly with your hands.

4. Use a damp cloth stained with baking soda to wipe the sealing strip of the refrigerator continuously.

Note: The refrigerator door seal will harden and age after long-term use, and a layer of talcum powder or talcum powder can be evenly applied on the surface of the refrigerator door seal and the place where the box is in contact with the door seal, so as to prolong the life of the door seal.

Reason: The refrigerator is a low-temperature and humid place, and if the grooves of the sealing strip are not cleaned regularly, it is easy for bacteria to grow and mildew.

Cleaning method: use toothpaste: apply toothpaste to the moldy area, then wipe it with a towel, and finally wash it off with water;

Use vinegar: Cleaning the sealing strip of the refrigerator with vinegar can clean off mildew and play a role in disinfection;

Use bleach: Dilute bleach and water at a ratio of 1:99 and wipe the moldy area with a towel to remove it.

What should I do if the refrigerator seal is moldy? Teach you a little trick to get clean no matter how dirty it is.

The first trick: toothpaste to help.

First, apply the toothpaste to the mold on the seal, and after a while, gently wipe it back with a towel, and then use the clear answer.

Water wash on it.

The second trick: vinegar to help.

Vinegar can not only remove stains and mildew from the inside of the refrigerator and the sealing strip, but also disinfect and disinfect and remove odors. So it's a good idea to use daily vinegar to clean the moldy seals of your fridge and the inside of your fridge.

Trick 3: Diluted bleach.

If the inside of the seal is not only moldy, but also emits a peculiar smell, then dilute the bleach and water in proportion and wipe it with a soaked towel. Once the seal has been wiped, it will be clean and tidy, and there will be no odors.

If you can't take it off, it's the easiest.

To do this, you first put some tea leaves in the refrigerator and clean the seal with alcohol. Back (PS: Remember to answer the simple cleaning of the refrigerator every 2 weeks.

Then the refrigerator will no longer grow mold. If you do what I said, it still grows mold, then it is a problem with the quality of the sealing strip. It is also possible to wipe directly with alcohol.

No need to take it off.

Friend, you can remove the seal and wash it dry with dish soap, not too hot water. After wiping dry, apply a layer of sesame oil and it will not grow mold

The sealing strip of the copy refrigerator can be treated as follows: BAI can use a sponge to add vinegar or dish soap to clean the moldy part of the refrigerator, which can not only wipe off the stains, but also antibacterial.

Dip a sponge or rag in a little dish soap, rub it a few times, and then wipe dry with a dry cloth.

Wipe with an old toothbrush dipped in toothpaste and dry with a dry cloth.

The main reason for mildew is that the inside of the refrigerator has not been cleaned for too long, there are too many bacteria, and it is a habit to clean the refrigerator thoroughly every 3 months.