-
Anonymous users2024-02-12The main purpose of the trigger is not to limit the usefulness of the flash, using the trigger can make more effects, and make the flash and ambient light blend more naturally. It is generally used in the studio with various lamps.
DSLR cameras use a trigger to fill in the light anywhere on the subject, making the ambient light of the whole frame** more three-dimensional. In addition, the flash can be equipped with larger accessories such as a diffuser and diffuser to change the light quality, which will be limited if placed on the hot shoe of the body. On the other hand, if you do not use a flash trigger and hit the subject directly with a flash, the surface of the subject is only covered by the flash amplitude and lacks shadows, making the overall ambient light appear unnatural.
Tips for using the trigger:
1. Don't take the light of the flash or the flash itself into the photo;
2. Pay attention to the recycle sound of the flash, because when the flash is not fully recycled (time 2-5 seconds), there will be insufficient or the flash effect is not obvious;
4. When using the flasher, the angle of the hand-held flashing light may be different each time, and using the lamp tripod can help control the angle of the flashing light;
5. Use the manual mode, try the output of different flashes with different aperture shutters, you may get different results.
-
Anonymous users2024-02-11Summary. Invest in a trigger that is compatible with studio flashlights as well as D700 cameras.
2.Paste the RF-604 (RX) receiver on the studio lamp and connect the product to the sync interface of the studio lamp through the studio lamp (camera) cable.
3.Connect the RF-604(TX) transmitter to the camera shoe, press the camera shutter to turn on the studio light.
How to connect the camera to the trigger.
Invest in a trigger that is compatible with studio flashlights as well as D700 cameras. 2.Paste the RF-604 (RX) receiver on the studio lamp and connect the product to the sync interface of the studio lamp through the studio lamp (camera) cable.
3.Connect the RF-604(TX) transmitter to the camera shoe, press the camera shutter to turn on the studio light.
Hope mine is helpful to you.
-
Anonymous users2024-02-10The trigger can control the flash from a distance. The trigger is divided into two parts: the transmitter and the receiver. Both the transmitter and receiver are loaded with signal gears, and it should be noted that the gears must match, otherwise the signal cannot be transmitted.
You said how many times the zoom can be pulled over, but the image quality is definitely not good. >>>More
1. Aperture priority means that the aperture is determined by you, the shutter is determined by the camera (automatic), and time priority is the **time is determined by you, and the aperture is determined by the camera (automatic). >>>More
The differences between DSLR cameras and other card cameras are: 1) The lens can be changed, and you can use a fixed focal length lens or a telephoto lens with different focal lengths. 2) Low-end SLRs can basically achieve a shutter speed of 1 4000 seconds, and mid-range to high-end SLRs can reach a speed of 1 8000 seconds, while ordinary card cameras cannot do it. >>>More
The full name of a DSLR is Single Lens Reflex, a single-lens reflex camera. The best feature of this type of camera is its single-lens viewing. Generally, the optical framing and shooting of the camera are separated (the LCD viewfinder of a small DC does not belong to the optical viewfinder, so it is also together). >>>More
A DSLR camera is a camera that is reflexively viewed through a single lens. >>>More