Is the new three layer hardwood floor good? Which is better, the new three layer hardwood flooring o

The new three-layer solid wood flooring of the regular brand is generally good! The new three-layer solid wood floor has only appeared in recent years, it can be said to be a solid wood floor, but there are some differences with pure solid wood flooring, the new three-layer is made of three-layer solid wood boards.

It is not made of a single piece of wood in the traditional sense, so it is more stable than a solid wood floor and is not prone to cracking and arching. contrast with multi-layer and reinforced composite panels.

The new third layer is more environmentally friendly because it is made of three layers of pure wood, and in short, the new third layer is a combination of solid wood flooring and laminate flooring.

The advantages of the two are compromised, which is more stable than pure solid wood and more environmentally friendly than reinforced compounding. In addition to the above advantages, the new solid wood flooring launched by Tiange in 2020 also has extremely high waterproofness, which can be suitable for the whole house to lay toilets and kitchens including dry and wet separation, pushing the new three-layer solid wood flooring to a new height.

It's ok, but it's a bit expensive.

The thick surface board of the three-layer solid wood floor is taken from more than 100 years of large-diameter logs to make sawn boards, which is high-grade and hard, generally with a thickness of 3-6cm, and is made of high-grade durable and ultra-thick surface boards, and the three-layer solid wood parquet can be used after planing, depainting and refurbishment, which is as durable as the solid wood floor.

The unique structure of the three-layer parquet that crisscrosses the wood changes the physical properties of the wood, and the stability is much higher than that of other wood floors. The middle core board and the back board are mostly soft, elastic cork species, which fully ensure the comfort of the foot, and have good sound absorption and temperature and humidity adjustment.

The three-layer solid wood floor adopts the same suspension pavement method as the laminate floor, which is very simple and easy to understand, and it is quite convenient to maintain, but if the ground is uneven or moisture-proof treatment is improper, the floor is also prone to sound and warp after the floor is paved.

The new three-layer solid wood floor is good.

1. The new three-layer solid wood floor is produced by pressing, one is a wear-resistant layer, one is a decorative layer, and one is a solid wood layer, which is a new product developed by combining many advantages.

2. The texture of this solid wood floor is relatively similar to that of solid wood, because of the increase of wear-resistant layer, its wear-resistant is more prominent, more slippery, and it will not be scratched with a thing at will.

3. Environmental protection is an advantage that must be praised, its three layers are solid wood core materials, so there is no formaldehyde release problem, and the environmental protection performance is very prominent.

Hardwood flooring

Solid wood flooring is a floor decoration material formed by drying and processing natural wood. Also known as log flooring, it is a floor that is directly processed from solid wood. It has the texture of natural growth of wood, is a poor conductor of heat, can play the role of warm in winter and cool in summer, comfortable feet, safe to use, is an ideal material for floor decoration such as bedrooms, living rooms, and study rooms.

Fraxinus mandshurica and southwest birch have good wood grain, which can obtain a good effect close to nature. The color of Liu'an wood and walnut is ideal, and the overall sense of the ground is very strong. The combus, wood bean, red plum and so on are dark in color, high in hardness, large in weight, dense in structure, and can be made into imitation mahogany flooring.

More high-end hardwood floors include teak, sandalwood, maple, oak, beech, rosewood, etc.

Kiss! Hello, happy to answer your <>

Although the three-layer solid wood floor is the same as the multi-layer solid wood floor, it is composed of three parts: the panel, the core layer and the bottom plate, but the three-layer solid wood floor is due to the small number of layers, so its panel thickness can generally reach 4-5mm or even thicker, so even if the panel is damaged in the later stage, it can be used again after night renovation. Due to the large number of layers of multi-layer real wood flooring, the thickness of the panel is between rounds, and the thickness of the panel cannot be renovated, because it will wear through the surface layer and cause the floor to be scrapped, so relatively speaking, the service life of the three-layer solid wood floor is better than that of the multi-layer solid wood floor. Hope mine can help you <>

Do you have any other questions?

Kiss! Hello, happy to answer your <>

The structure of the traditional three-layer solid wood floor, its structure is composed of wood veneer, the core layer (divided into rib core and the whole core) and the bottom veneer, which has three obvious levels from the side. The new three-layer solid wood floor is said to be 3 layers, but its structure can be divided into 4-6 layers, generally speaking, the original 3-4mm high-quality hardwood hardwood surface plate will be replaced with a surface board, and then add a wear-resistant layer and a balance layer, so the structure of the new three-layer solid wood floor and the three-layer solid wood floor is quite different. 2. The difference between the three-layer solid wood floor is that it is also made of natural logs, and the surface layer generally chooses rare and high-quality hardwood species, so although its market is not as high as that of pure solid wood flooring, it is not cheaper, and it is much higher than laminate flooring.

The new three-layer solid wood floor can greatly reduce the overall production cost by replacing the thinner surface board, so it is lower than the three-layer solid wood floor, as a transitional product between the three-layer and laminate flooring, some families choose the new three-layer solid wood flooring is actually a good choice. 3. The difference in the performance of the traditional three-layer solid wood floor is that the thickness of the surface veneer is 3-4mm, so both the decorative performance and the foot feel can reach the level of the pure solid wood floor, highlighting the comfortable foot feeling and decorative performance. Through the modification of the structure, the outstanding performance of the new three-layer solid wood floor is often different from the traditional three-layer solid wood floor, such as the diamond surface on the market, the new three-layer solid wood floor, the surface layer will generally be sprayed with wear-resistant layer, and diamond powder will be added to enhance the surface wear-resistant performance while making the floor have the advantages of high impact and scratch resistance, but the same will sacrifice part of the comfort, so the main feature is wear-resistant and durable.

Hope mine can help you <>

Do you have any other questions?

The new triple floor is good.

The new Pihe three-layer solid wood floor is said to be 3 layers, but its structure can be divided into 4-6 layers, generally speaking, the original 3-4mm high-quality hardwood hardwood surface plate will be replaced with a surface board, and then add a wear-resistant layer to balance the layer. The structure of the traditional three-layer solid wood floor is composed of wood veneer, core layer (divided into rib core and whole core) and bottom veneer, which has three obvious layers from the side.

In addition, through the modification of the structure, the outstanding performance of the new three-layer solid wood floor is often different from the traditional three-layer solid wood floor, and the main feature is wear-resistant and durable. The traditional three-layer solid wood floor has a thickness of 3-4mm because of the surface veneer, so it can reach the level of pure solid wood flooring in terms of both decorative performance and foot feel, highlighting the comfortable foot feeling and decorative performance.

Triple-layer flooring buyer's guide

First of all, of course, it depends on the material of the panel, the more precious the tree species, the higher the **. At present, the name of the material of the three-layer solid wood floor is named after the material type of the panel, and the varieties are precious wood and ordinary wood, imported wood and domestic wood.

Among them, the three-layer solid wood flooring made of teak, walnut, green mulberry, and twin wood from Southeast Asia and South America is higher, while conventional materials such as maple and oak are lower.

Generally speaking, the moisture content of the three-layer solid wood floor is an important factor that directly affects the dimensional stability of the floor, and the moisture content of the purchased floor should meet the requirements of the national standard.

The new three-layer floor is better or the three-layer floor is better: "Pure Three-Layer" is better than its pure and pure return advantages compared with "Multi-layer", its total structure is only three layers, so its decorative pants are thick, and the general decorative veneer material is 3-5 mm. "Solid wood multi-layer its structure in 8-10 layers, its decorative surface thickness of 1,2-2 mm,", so pure three-layer flooring it has the advantages of decorative surface thickness, overall glue content and other advantages "stability is the same".

Then the pure three-layer and the new three-layer are more than "some of the new three-layer is essentially five layers", the overall performance is the same, but the new three-layer his decorative veneer, its thickness is generally 1,2-2 mm, the new three-layer it saves the cost of the decorative surface, so the difference is here, I hope it can help you.

No matter in terms of environmental protection, applicable geothermal energy, stability and durability, three-layer solid wood is incomparable with multi-layer solid wood: 1Eco-friendly:

The three-layer solid wood structure is simple, the core board is made of wood strips, a large amount of glue is used, and in order to enhance the adhesion between the veneers, a sufficient amount of glue must be applied to ensure that it is not layered in the geothermal situation, so environmental protection is difficult to control. In fact, to distinguish whether a floor is environmentally friendly, it depends on the adult test results of the finished product. 2.

Stability, suitable for geothermal: the three-layer solid wood is difficult to balance the weight of the old surface plate and the back plate of the jujube tung tree, so the tensile force can not be balanced, and the wood fiber of the solid wood core of the core board is transverse, and the wood fiber of the surface plate and the back plate is longitudinal i, that is to say, the three layers only have the approximate distribution direction of two wood fibers, it is difficult to achieve the tic-tac-toe structure, and there is no stability. The multi-layer solid wheel posture wood is criss-crossed by more than nine layers of veneer, layer by layer of hot pressing, with less glue, and tic-tac-toe distribution, the prestress in the bench is set well, which enhances the stability of the whole board and is more suitable for geothermal environment.

3.Difficult to use: Single-layer solid wood cannot be used for geothermal because once the moisture content of single-layer solid wood is reduced, there will be cracking, bending and deformation of the surface layer.

Similarly, the three-layer solid wood surface plate is thicker, and the core board is made of wood strips, in order to reserve the so-called expansion joint, can not really be sealed, the air inside the board body can be freely circulated, so the moisture resistance effect is very poor, the same way, the moisture content is difficult to control, easy to appear surface cracking, bending and arching phenomenon.

The new three-layer solid wood diamond floor is combinedLaminate flooringAnd the advantages of three-layer solid wood flooring to develop a new product, the use of three-layer solid wood laminated decorative layer and wear-resistant layer production, because the wear-resistant layer containsDiamondsIt is named a new three-layer solid wood diamond floor.

The new three-layer solid wood flooring visually approximates the texture of solid wood, while increasing the wear resistance, resistance and scratch resistance of the floor.

The advantages of the new three-layer solid wood flooring are mainly as follows:

1. Low aldehyde is more environmentally friendly: three-layer solid wood core material, almost no formaldehyde release, and higher environmental performance.

2. The surface of gold and steel is super wear-resistant: the surface is filled with gold and steel powder by spraying wear-resistant layer to enhance the surface wear-resistant, and has the advantages of high impact and scratch resistance

3. Waterproof and moisture-proof: the back is filled with a moisture-proof balance layer, the surrounding lock sealing wax treatment, and the six-sided three-dimensional sealing structure can effectively prevent water vapor.

Infiltration, the floor is waterproof, moisture-proof, and anti-corrosion performance is higher, and the above content refers to: Encyclopedia - Solid wood flooring.