What is the difference between tile adhesive and adhesive? The adhesive backing is good, and the til

Both are materials used to pave ceramic tiles, the main difference is that the product form and usage are different, the function of tile adhesive is similar to cement mortar but better than cement mortar, it can be used alone, but the adhesive should be used with tile adhesive, it will be more firm, especially for large tiles or floor tiles on the wall, it is more recommended to use adhesive; The landlord can learn about the brand of Keshun home waterproofing, which has tile adhesive and tile adhesive, and the adhesion is quite good, which is worth using. You can go yourself.

What's the difference It's all for porcelain.

Summary. The adhesive is good, the tile adhesive is good, the tile adhesive is good. Tile adhesive and ceramic tile adhesive, although there is only one word difference, there is a world of difference in use.

Tile adhesive can be understood as a glue specially used to stick tiles, but we know that it is not enough to pave tiles only with glue, and cement mortar is also needed to support behind the tiles. Otherwise, there will be a hollow drum sound when struck, and the load-bearing capacity of the tile will also be affected when used. And tile adhesive is a kind of thing that can completely replace cement mortar, and it itself has a lot of cement and sand in it.

It can be simply understood as: the cement mortar that has been prepared (glue is added to it to make the cement mortar more viscous). When using, it can be used directly instead of cement mortar.

Generally, tile adhesive is mainly used for small patches of ceramic tiles, or some places that are not easy to construct, and then apply a layer of adhesive after using cement mortar. Tile adhesive is used to replace a large amount of cement mortar directly for thin paste. Doing so out of the tiles, will take up less space.

The adhesive backing is good, and the tile adhesive is good

The adhesive is good, the tile adhesive is good, the tile adhesive is good. Tile adhesive and ceramic tile adhesive, although there is only one word difference, there is a world of difference in use. Tile adhesive can be understood as a glue specially used to stick tiles, but we know that it is not enough to pave tiles only with glue, and cement mortar is also needed to support behind the tiles.

Otherwise, there will be a hollow drum sound when struck, and the load-bearing capacity of the tile will also be affected when used. And tile adhesive is a kind of thing that can completely replace cement mortar, and it itself has a lot of cement and sand in it. It can be simply understood as:

The cement mortar that has been prepared (glue is added to it to make the cement mortar more viscous). When using, it can be used directly instead of cement mortar. Generally, ceramic tile adhesive is mainly used for small patch repair of ceramic tiles, Bijing or some not very good construction of the Hui Shen Fang, after the use of cement mortar and then apply a layer of adhesive.

Tile adhesive is used to replace a large amount of cement mortar directly for thin paste. Doing so out of the tiles, will take up less space.

That's all off with adhesive.

Yes. What is good to use?

Tile glue is good.

When it comes to tile paving, we often hear some terms. For example, dry paving, wet paving, of course, there are also tile adhesive and tile adhesive. For home decoration, in the process of paving tiles, how to choose dry and wet paving, or whether you need to use glue?

If you need to use glue, how should you choose between tile adhesive and tile adhesive?

Contributed by Li Suting, Zhongji Building Materials.

Both of these things are glue, and both are glues that need to be used in the process of laying tiles. The difference between the two is that the tile adhesive is just a glue, and a thin layer is applied to the back of the tile when used. Tile adhesive is not only glue, it can be understood as cement mortar with glue added.

The purpose of tile adhesive is to make the tile paving more firm. For example, in the face of some wall tiles with low water absorption rate (the most common is floor tiles on the wall), it is necessary to apply a layer of tile adhesive on the back of the tile. After that, just like ordinary tiles, just apply cement mortar and pave it.

The purpose of tile adhesive is more for the convenience of construction - or in other words, to reduce the thickness of the tile. When using tile adhesive, there is no need to use cement mortar. And because the viscosity of tile adhesive is much better than that of cement mortar, the thickness of tile adhesive is thinner than that of cement mortar.

In some places where the thickness of tiles needs to be controlled, such as in a narrow bathroom, tile adhesive is needed instead of cement mortar. There is also a special case, that is, when a new layer of tiles is laid on top of the old tiles. At this time, even if the cement mortar is paved thickly, it is easy to produce hollowing.

At this time, tile adhesive can only be used instead of cement mortar for construction, which is not only stable, but also thin.

Regarding tile construction, there is also a group of terms that are often mentioned, that is, dry and wet paving. The so-called dry paving refers to laying dry cement mortar directly on the ground, then pouring water on the ground, and then placing the tiles on the ground.

Wet paving, the cement mortar is mixed with water on the side to make a paste. During construction, put the damp cement mortar on the back of the tile and buckle it to the wall and floor.

Obviously, dry paving is a more convenient construction method. Moreover, the cement mortar under the tile is more uniform, and it is not easy to have the problem of hollowing. Wet paving is different, and the trouble of construction is only one aspect.

The process of applying the damp cement mortar to the back of the tile requires that the cement mortar must be uniform. If there is too much cement mortar, the tiles will be uneven; If there is less cement mortar, the tiles will be hollow.

Therefore, wherever we can use dry shops, we always use dry shops. For home decoration, floor tiles are often all used dry.

But the wall tiles are not good, we can't fix the dry cement mortar on the wall and then pour the water. Therefore, in the process of laying the wall, we often use all wet paving.

Dry paving, wet paving, glue paving (also divided into tile adhesive and tile adhesive) is the most common three construction methods when tile paving, the three methods do not matter good or bad, we should choose for different paving positions, choose the most suitable method. Especially in home decoration, we should pay more attention to the control of these details.

Difference 1:

Tile adhesive is dry powder, or dry powder plus emulsion, and cement mortar, is a binder, directly bonded with ceramic tiles and walls;

Tile adhesive is liquid, paste, etc., in order to increase the adhesion between the tile and the adhesive, between the tile and the adhesive plays an excessive, connecting the role of the upper and lower role, itself is not in direct contact with the wall, the ground, can not replace the adhesive use. When laying tiles, brush the tile adhesive on the back of the tile, and then use cement mortar or tile adhesive to pave.

Difference 2: Tile adhesive is physically bonded. It is the use of water-retaining agents, rubber powders, etc. to increase the adhesion of traditional cement mortar. The quality of tile adhesive is uneven, and there is a risk of bonding for vitrified tiles with low water absorption.

Tile adhesives are chemically bonded. It can better penetrate into the capillary pores of ceramic tiles and form a polymerization reaction with the binder, which can better play the role of "double-sided tape" and improve the efficiency of traditional cement mortar and tile adhesive.

What is the difference between tile adhesive and tile adhesive? There is a big difference between the words, so don't use them indiscriminately if you don't understand.

The difference between tile adhesive and tile adhesive: 1. The product state is different, tile adhesive is a dry mortar product, and ceramic tile adhesive is an emulsion coating product. 2. The construction method is different, the tile adhesive needs to be stirred and used on site, and the tile adhesive can be used when it is opened.

3. The product attributes are different, tile adhesive is the main material for tile paving, and tile adhesive is an auxiliary material for paving, mainly to solve the problem of difficult tile interface paving.

The construction process of tile adhesive is different according to its type differences, the construction method of liquid tile adhesive should be used together with cement mortar, the specific construction method is to Chenguang tile adhesive as an example, Chenguang tile adhesive, is to brush the adhesive on the back of the tile, and when the tile adhesive becomes transparent, brush with cement and sand, and then brush a layer of adhesive on the wall or ground, and then paste the tile on the wall, which will greatly increase the service life of the tile, and do not fall off and do not hollow. If it is a powder solid tile adhesive, you have to use water and tile adhesive to stir first, the amount of water is not easy to grasp, it is best to find a precise container to hold water, and you can directly brush the wall after stirring.

Tile pasting process: base layer tile adhesive tile adhesive ceramic tile.

Tile adhesive is responsible for the bonding of the base layer to the tile, while tile adhesive is only responsible for the bonding of the tile adhesive to the tile.

Tile adhesive (tile adhesive) is a one-component or multi-component mixture composed of organic or inorganic cementitious materials, mineral aggregates, and organic admixtures. Tile adhesive belongs to cement-based improved mortar, but also hydraulic cementitious material, its adhesion is based on the slurry penetrates into the adhesive substrate void, and gradually forms a needle-like crystal and produces friction, while porcelain bricks are dense and porous, and it is difficult to achieve mechanical nailing. The vitrified tile material is dense and the water absorption rate is as low as 1, so it is difficult to achieve effective bonding with ordinary tile adhesives.

Alkali Tile Adhesive is a product of high-quality polymer emulsion material and inorganic silicate compounding, ceramic tile adhesive can be used in combination with a variety of adhesive materials to form a tile paste system, ceramic tile adhesive can form a network structure between the base layer by changing the physical properties and chemical properties of the surface of the object, and improve the bonding strength between bricks and adhesive materials. Due to the shortcomings of the tile adhesive itself is also obvious, the tile adhesive itself is a semi-finished product, which can only be used by adding water on site, the water-cement ratio is uncontrollable, the bonding strength fluctuates greatly, and the unit price of tile adhesive per square meter is high, which is difficult for general customers to bear, and then there is a phenomenon of on-site blending cement, which greatly reduces the effect of tile adhesive, and the birth of alkali gram tile adhesive just solves the problem that tile adhesive can not solve.

When laying tiles, tile adhesive is required to avoid falling off. Which is better, tile adhesive or adhesive? PChouse will take you to find out.

Which one is better, you can compare the advantages and disadvantages of the two:

1. The adhesive of the tile is a chemical paste.

The advantages are: high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction. It is suitable for bonding wall and floor tiles, mosaics, marble, natural stone, etc.

The disadvantages are: the construction wall should be moist (wet on the outside and dry on the inside), and maintain a certain degree of flatness, and the uneven or extremely rough parts should be leveled with cement mortar and other materials; The base layer must be cleaned of floating ash, oil stains, and wax to avoid affecting the viscosity and weakness.

2. Tile adhesive is physically pasted and closed.

The advantages are: low cost, good water retention, not easy to produce hollow drumming, high bond strength, and no falling off. It is suitable for laying large area of large floor tiles and porcelain old reputation cracked bricks.

The disadvantage is: the cost of tile adhesive is high. The market level of ceramic tile adhesive is uneven, and it is difficult to distinguish the real from the fake. Inferior tile adhesive will also release harmful gases to endanger human health, and the environmental protection is relatively poor.

Dear, I think it is to be used by Duan Song, the quality assurance of the brand.

1. Gulai (ceramic tile adhesive, ceramic tile adhesive): Shanxi Gulai Building Materials, engaged in the building materials industry for many years, has been focusing on product development and production, and has a number of subsidiaries.

2. JCDecaux (tile adhesive): JCDecaux (Guangzhou) Building Materials, founded in 1998, after more than 20 years of development, JCDecaux China has become a leader in China's special mortar industry.

3. Oriental Yuhong (tile adhesive): Beijing Oriental Yuhong Waterproof Technology Co., Ltd. is a company mainly engaged in waterproof coating products. After successive expansions, the products include waterproof coatings, tile adhesives and other products.

4. Tibei Bell (tile adhesive, tile adhesive): Guangzhou Tibei Bell Building Materials Co., Ltd. is a large-scale enterprise specializing in the research and development, production and sales of new environmental protection water leakage and environmental protection binders and dry mortar.

5. Yuegang (tile adhesive): Shanghai Yuegang Building Materials is a company focusing on waterproof coatings, among them, the company's development and production of products are adhesive and tile adhesive products.

6. Xiluoka (tile adhesive): Hunan Xiluoka Building Materials Co., Ltd. is an emerging company specializing in waterproof building materials.

7. eLong (Japan), China belongs to Singapore Lishi Group. In 1992, Nippon Paint entered China, and the company is mainly engaged in waterproof coating products. After past expansion, its products include waterproof coatings, tile adhesives and other products.

Tile adhesive should choose a strong adhesion that has passed the standard test, such as Gulai, Tibeibeier, etc.

First of all, it is still difficult to choose the brand of ceramic tile adhesive, because each brand has its own advantages, first of all, do your own thing in this industry, so to give you a suggestion, the general ceramic tile adhesive brand selection Jingdi and Gaode and Yuhong These brands are very good. And these brands are all relatively well-known brands.

The tile hollow drum falls off.

Tile adhesive separation: ordinary ceramic tiles, vitrified tiles, and one is general-purpose. If the tile is large, it is necessary to choose a tile with high adhesive strength, and it will be even better.

Gulai, Tibeibel, Xiluojia, Nippon, Degao, etc., these are all old brand manufacturers, and they also have a certain reputation in the market, and the quality will be more advanced in relative terms. Hope it helps!