How to install the sensor light and how to use the sensor light

If you are at home, it is recommended to install solar sensor lights, which do not need wiring, do not consume electricity, are easy to install, and are safe, energy-saving and environmentally friendly, and also support remote control!

Summary. Hello, I am your professional car butler Mr. Lai, to help you answer the following questions: how to use intelligent sensor lighting How to use smart sensor lighting equipment.

360-degree full-angle human body sensing intelligent on/off light, according to the ambient light intelligent judgment of whether to turn on and off the light, the pursuit of delicate experience of the lights on and off the function of the lights, can be independently set the sensing sensitivity, brightness, when the lights are on.

Manually plug in the DC5V power supply to power the sensor light. When a human hand crosses the sensing zone at an effective distance (about 5cm), the sensor light will automatically turn on. When the human hand crosses the sensing zone every time the effective distance is crossed, the sensor light is automatically adjusted.

When the human hand stays on the sensing area for 3s, the sensor light flashes briefly for 3 times and then the human hand leaves the sensing area, and the sensor light will automatically turn off after 30s. Manually turn on the power switch of the sensor light and supply power to the sensor light (it will warm up for 30s, it is my honor to serve you, you can ask other questions related to the car, or further describe your current problems in detail, so that the answer here will give you better answers and better services, thank you for your understanding and cooperation!!

How to use the sensor light.

No. 2978 Hello, your question teacher is sorting it out, please ....... laterExpected to be sent to you within 5 minutes!

Hello, I am your professional car butler Mr. Lai, to help you answer as follows: intelligent induction lighting let shout how to use intelligent induction lighting equipment 360 degree full-angle human body induction intelligent on/off lights, according to the ambient light intelligent judgment whether to turn on and off the lights, the pursuit of delicate experience of the lights on and off function, can be set independently sensing sensitivity, brightness, when the lights are on. Manually plug in the DC5V power supply on the slip type to supply power to the sensor light.

When a human hand crosses the sensing area at an effective distance (about 5cm), the sensor light will be automatically turned on. When the human hand crosses the sensing zone every time the effective distance is crossed, the sensor light is automatically adjusted. When the human hand stays on the sensing area for 3s, the sensor light flashes briefly for 3 times and then the human hand leaves the sensing area, and the sensor light will automatically turn off after 30s.

Manually turn on the power switch of the sensor light and supply power to the sensor light (it will warm up for 30s, it is my honor to serve you, you can ask other questions related to the car, or further describe your current problems in detail, so that the answer here will give you better answers and better services, thank you for your understanding and cooperation!!

Hello, I hope mine is helpful to you, I wish you a happy life, remember to give a thumbs up!

The installation of the sensor lamp is mainly divided into two parts: installation and commissioning.

First determine the voltage, first turn off the power supply, connect the power supply to the Chinese family standard circuit, and fix it on the wall or ceiling through the chassis with 4 25 large flat head self-tapping screws. Then the wiring is carried out, one of the wires in the power cord is connected together with the terminal grain and the live wire, and the other one is connected to the zero wire, which can be connected so as not to fall off. Install the bulb and back cover, and you can start blind debugging when the power is on.

It should be noted that the lights will not be turned on normally during the day or when the light is relatively bright, and the lights will be automatically turned on at night or when the light is low.

When debugging, it should be noted that the right side of the switch will have a larger sensing range than the upper and lower sides, so when installing, try to keep its positive axis and the direction of the human channel vertical, so as to achieve the best sensing effect as much as possible. In addition, after the switch is powered on, if the ambient light is bright, the bulb will flash itself three times, and the initialization can be finished in about a minute, and it will start to enter the monitoring state. Use curtains and other things to cover the light as much as possible, so that the switch starts to induct work, people do not leave and keep moving, the switch will continue to work, as soon as the person leaves, the induction switch will delay the shutdown of the load.

If the surrounding light is already dim after the power is on, the switch will directly enter the monitoring state, and then the debugging after the monitoring can be carried out.

Things to pay attention to when installing sensor lights.

1. Sensor lamps are generally used indoors, and should not be installed and used outdoors or in places with harsh environments.

2. When installing the induction lamp, disconnect the power supply, do not install it live, and then power on and debug it after the installation is completed.

3. Do not use beyond the power range.

4. The sensor lamp can be installed in the place where people often move as much as possible, so as to improve its sensitivity and working range.

5. The installation environment should be kept dry and should not be used on damp walls or ceilings.

How to install the sensor lamp, the above from installation to commissioning, and then to the relevant precautions have been introduced, and it is quite convenient to install it at home.

Summary. Answer: Hello kiss How to install the sensor lamp How to install the sensor lamp correctly 1, no matter where the sensor lamp is installed, you can understand that it has a light guide plate and a switch.

First of all, the light guide plate needs to be installed in a determined position, and a hole must be drilled in the determined position, and there are three ports on the switch. Two of them are livewire ports and one is neutral ports. It is necessary to connect the corresponding wiring with the corresponding interface to ensure that the wiring does not appear loose, and then wrap it with insulating tape.

2. After it is done, pull it hard, whichever does not fall. Then install the bulb glass, including the back cover. If it is the first time to turn on the power supply, there are three continuous lights on, which means that it is normal.

Generally speaking, it can automatically turn on at night when the light is low. 殺殺

Answer: Hello kiss How to install the sensor lamp How to install the sensor lamp correctly 1, no matter where the sensor lamp is installed, you can understand that it has a light guide plate and a switch. First of all, the light guide plate needs to be installed in a determined position, and a hole must be drilled in the determined position, and there are three ports on the switch.

Two of them are livewire ports and one is neutral. It is necessary to connect the corresponding wiring with the corresponding interface, and the wiring of the hand-dismantling certificate will not be loose, and then wrap it with insulating tape. 2. After it is done, pull it hard, whichever does not fall.

Then install the bulb glass, including the back cover. If it is the first time to turn on the power supply, there are three continuous lights on, which means that it is normal. Generally speaking, it can automatically turn on at night when the light is low.

Generally speaking, the installation of sensor lamps is divided into two parts, one part is the previous installation, and the other part is the later commissioning. 1. Installation. (1) Before installation, it is necessary to turn off the power supply at home, and ensure that there is no electricity to operate, so as to ensure the safety of the wiring personnel.

2) Choose a standard wire, we can fix the sensor light in the place where it needs to be installed through the chassis, for example, some need to be installed on the wall or ceiling. (3) Wiring, one of the power cords should be connected to the live wire, and the other one should be connected to the neutral wire, and then the bulb and cover need to be installed. 2. Debugging Pakai.

In the process of commissioning. It should be noted that because the left and right sides of the switch are more inductive than the upper and lower sides, we should try to keep the middle line and the direction of the aisle perpendicular when we install it, so that the effect of the sub-sensor light is very good. After the switch is energized, arrange for a person to move next to it, and then the sensor light starts to work.