Tile adhesive Tile adhesive is stupid and can t tell the difference, what is the difference between

Tile adhesive, tile adhesive silly can not be distinguished, tile adhesive and tile adhesive are different: the ingredients are different, the main components of tile adhesive are gravel, concrete calcium formate, styrene-butadiene rubber powder and its acrylic emulsion. The main components of ceramic tile back coating glue are moisturizing emulsion raw materials, inorganic silicates and their polymers.

The construction method is not the same, tile adhesive is a powdery commodity, it needs to be mixed with water into a high-speed rail bullet train and then carried out engineering construction application, and ceramic tile back coating glue belongs to a kind of liquid glue, it does not necessarily put water to mix, when using the application directly on the line.

The application is different, tile adhesive is mainly used in home decoration wall tiles, tiles, veneer tiles and other building decoration materials, generally used for interior walls, surfaces, shower rooms, restaurant kitchens and their pavement of these engineering building decoration. The ceramic tile back coating glue is generally used to wet hang the reverse side of the glazed brick, which can well deal with the bonding length between the glazed brick and some sticky raw materials, and can effectively deal with the problem of wall hollowing and falling off in the process of using glazed bricks.

Tile adhesive and tile back adhesive can be used together, because tile adhesive belongs to the stiffness, it is impossible to use tile adhesive alone to bond floor tiles, and can not be used with the thermal expansion and contraction of floor tiles and walls and aging, but tile back adhesive is a kind of waterproof putty, it can just solve the in-situ stress of both when mixed with tile adhesive, and can play a particularly good role in adjustment, thereby improving the viscosity and stability of ceramic tiles.

The commodity is different, the main components of tile adhesive are concrete, gravel, fiber, calcium formate, etc., while the ceramic tile back glue is usually polymer, tile adhesive belongs to the powder, generally need to be put water to mix the construction of the project, and the tile back glue is a liquid, which can be directly constructed. Both are mainly used for bonding floor tiles, wall tiles, tiles and other building decoration materials, but their adhesive compressive strength, suitable for the natural environment is not the same, tile adhesive belongs to the relatively cheap, ordinary tile adhesive, and tile back coating glue is really a new upgrade of tile adhesive, the most important solution is different.

Tile adhesive: the main components are cement, sand, hydroxypropyl methylcellulose, calcium formate, polyvinyl alcohol, styrene-butadiene rubber powder, etc.

Tile adhesive: the main components are polymers, emulsion materials, and inorganic silicates.

The raw materials used in the two are different, and the main raw materials for the production of tile adhesive are cement, quartz sand and other materials, and also include some polymers, which are substitutes for traditional cement mortar; Tile adhesive is a polymer material that is emulsion-like.

The way of use is different, the degree of firmness is not the same, and there is also a gap in terms of **.

1. The adhesive of the tile is a chemical paste.

The advantages are: high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction. It is suitable for bonding wall and floor tiles, mosaics, marble, natural stone, etc.

The disadvantages are: the construction wall should be moist (wet on the outside and dry on the inside), and maintain a certain degree of flatness, and the uneven or extremely rough parts should be leveled with cement mortar and other materials; The base layer must be cleared of floating ash, oil stains, and wax to avoid affecting the adhesion.

2. Tile adhesive is physically pasted.

The advantages are: low cost, good water retention, not easy to produce hollow drumming, high bond strength, and no falling off. It is suitable for laying large area and large blocks of floor tiles and tiles.

The disadvantage is: the cost of tile adhesive is high. The market level of ceramic tile adhesive is uneven, and it is difficult to distinguish the real from the fake. Inferior tile adhesive will also release harmful gases to endanger human health, and the environmental protection is relatively poor.

Adhesive features: tile adhesive is made of high-quality polymer emulsion material and inorganic silicate composite products, ceramic tile adhesive can be used in combination with a variety of adhesive materials to form a ceramic tile paste system, greatly improve the adhesive force of ceramic tile and base layer, ceramic tile adhesive has good performance in standard concrete slabs and glazed tiles, and the safety performance is greatly improved. It is specially used for the back treatment of wet vitrified bricks, which can effectively improve the bond strength between vitrified tiles and adhesive materials, and solve the common hollowing and falling off problems in wet pasting of vitrified tiles.

It is also suitable for the back treatment of stone and other bricks with low water absorption, dense texture and smooth surface.

Tile adhesive features: Tile adhesive contains a variety of additives, specifically the functionality of tile adhesive. Generally, tile adhesive is added to provide water retention and thickening of cellulose ether, as well as to provide latex powder that increases the adhesion of tile adhesive, the most common latex powder is vinyl acetate copolymer, laurate, ethylene vinyl chloride copolymer, acrylic acid and other additives, the addition of latex powder can greatly increase the flexibility of tile adhesive and improve the role of stress, increase flexibility.

"Tile adhesive (also known as tile adhesive) is a construction auxiliary material applied to the back treatment of wet vitrified tiles, which can effectively improve the bond strength between vitrified tiles and adhesive materials, and solve the common hollowing and falling off problems in wet pasting of vitrified tiles. Floor solid tile adhesive is a flexible water-based emulsion modified from polymer formula, which is not only environmentally friendly, non-toxic, no peculiar smell, but also has good air permeability, high flexibility, acid and alkali resistance, strong weather resistance, suitable for a wide range of temperature and humidity, and can be constructed in humid environments.

For different bricks and different environments, there are different products to be used:

Lougu A8 weather-resistant (two-component) tile adhesive is suitable for large bricks above 1000mm, with the best viscosity, strong cold and heat resistance, and can withstand high temperature boiling. It is more suitable for pasting large bricks on the background wall.

Lougu A6 super strong (one-component) tile adhesive is suitable for bricks with low water absorption above 600mm, tensile, high and low temperature resistance, moisture, suitable for all kinds of ceramic tiles, marble, mosaic bricks, vitrified tiles, polished tiles, calcium silicate boards, gypsum boards, concrete surface paste, long-term bonding, can solve the problems of hollowing, cracking, falling off of the plastering layer caused by the smooth surface of the adhesive object, too low water absorption, too strong, etc., is polished brick, marble, mosaic, artificial stone, Ideal bonding product for natural stone.

Lougu A5 reinforced (one-component) tile adhesive is suitable for 300mm-600mm bricks with low water absorption, elongation, high and low temperature resistance, moisture, suitable for all kinds of ceramic tiles, marble, mosaic bricks, vitrified tiles, polished tiles, calcium silicate boards, gypsum boards, concrete surface paste, long-term bonding, can solve the problems of hollowing, cracking, falling off of the plastering layer caused by the smooth surface of the adhesive object, too low water absorption, too strong, etc., is polished brick, marble, mosaic, artificial stone, Ideal bonding product for natural stone. "

It would be better to apply tiles or choose a special tile adhesive. Because this glue is specially made for tiling, it will also be relatively strong. If you cut corners, you will definitely have a lot of troubles to remedy in the later stage, so in the first decoration, we should go to the building materials market to choose some better materials.

We'd better choose the materials ourselves, and if we had to get the workers to buy them, they'd probably buy me very bad materials and give us a lot of money. Therefore, if we buy these materials ourselves, we will understand what these materials are for, and then we can reduce the probability of being pitted. You just have to pay the workers.

As long as you run a few more building materials markets, you will definitely be able to find these materials. When choosing these glues, be sure to choose some big brands, because these big brands are likely to be particularly strong. If it's a smaller brand, the quality may not be very good, and then we need to replace it later, so we actually have to pay a bigger cost.

Therefore, we must choose some good quality watering, so that we can be more firm when we apply tiles.

It is recommended to choose tile adhesive backing, because tile adhesive can solve the phenomenon of tile hollowing and can save costs.

Tile backing. Because the tile adhesive is more solid and has a longer service life, I think I should choose the tile adhesive.

It is better to choose tile adhesive, because then the bonding effect is better, and at the same time, it can achieve a degree that we want.

Tile adhesive should be chosen, the effect of tile adhesive is still very good, the paste effect also has a strong skill, and the professionalism in this area is also relatively strong.

Tile adhesive does not have very high requirements for wall flatness, the wall is slightly uneven, tile adhesive mortar can be evenly leveled, and the tile adhesive is almost impossible to level the wall because it is an emulsion, so the requirements for wall flatness are particularly high. It is more solid than the traditional cement tiles, which effectively improves the bonding strength between the tiles and the wall, and is not easy to fall off. But many people can't figure out what kind of decoration to use, and they don't know how to use it.

After the tiles are coated with adhesive, the tiles should be set aside to dry naturally. This tile adhesive must be dried before it can be used. If you want to be a brand, we recommend the big brands on our side, and the tile adhesives of Lougu and Loubang are good choices.

In fact, it is the same, the tile adhesive is the tile adhesive. The more professional name is tile adhesive, but because this is used to paste the back of the tile, it is also commonly called tile adhesive.

It is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building decoration places. Its main characteristics are high bonding strength, water resistance, freeze-thaw resistance, good aging resistance and convenient construction, which is a very ideal bonding material. The same product, but the name of each place is different.

It can be said that the tile adhesive is more like the full name of the product, just like the building solid tile adhesive, and the tile adhesive is more like the common name, because the adhesive is applied to the back of the brick, so it is called the adhesive. The tile adhesive is a water-based emulsion type, painted on the back of the tile, and the tile adhesive is a powder, which is used to match the cement mortar, and the functions of the two are also very different, so the subject must not confuse the two.

Generally speaking, it is the physical occlusion force, for the brick with a relatively high water absorption rate, it can be occluded, but for the more expensive high-end bricks with low water absorption rate such as vitrified bricks and microcrystalline stone, the physical occlusion force cannot be satisfied. And it can also effectively prevent the damage caused by thermal expansion and cold contraction. The strong and flexible type solves the problem of paving facing materials such as vitrified bricks, and its water resistance, heat resistance, and freeze-thaw resistance can fully meet the requirements of use.

1.Contains different ingredients. Tile adhesive: the main components are cement, sand, hydroxypropyl methylcellulose, calcium formate, polyvinyl alcohol, styrene-butadiene rubber powder, etc.

Tile adhesive: the main components are polymers, emulsion materials, and inorganic silicates. 2.The application is different.

Tile adhesive is mainly used for pasting ceramic tiles, face tiles, floor tiles and other decorative materials, and is widely used in interior and exterior walls, floors, bathrooms, kitchens and other building decoration places. The adhesive of ceramic tile is mainly used in the back treatment of wet vitrified tiles, which can effectively improve the bond strength between vitrified tiles and adhesive materials, and solve the common hollowing and falling off problems in wet pasting of vitrified tiles. 3.

The way of construction is different. Tile adhesive is in powder form, which needs to be stirred into a paste form by adding water. The tile adhesive is a liquid glue, which does not need to be stirred with water and can be used directly.

The composition is different, the finished product state is different, the adhesion strength is different, the applicable environment is different, and the quality inspection degree is different. Tile back coating glue is mainly used to deal with tile interface, and tile adhesive is used to replace cement sand.

Tile adhesive and tile adhesive, in fact, the difference is not particularly big, but the two things are used in different ways.

What is the difference between tile adhesive and tile adhesive? There is a big difference between the words, so don't use them indiscriminately if you don't understand.

The emulsion can be identified by the color seen visually, the emulsion is good or bad from the emulsion hue, the hue of the emulsion is related to the particle size of the latex particles, due to the reflection of refraction, the particle size of the latex particles >1 m is the milky white emulsion, the particle size of the latex particles is the blue-white emulsion, the particle size of the latex particles is gray translucent, the particle size of the latex particles is transparent liquid, if it is reddish-brown, it mainly reflects the color change of the initiator, it is a bad emulsion. Generally, the emulsion obtained by emulsion polymerization is blue, which is mainly related to the particle size of the particles.

Tile adhesive, also known as face tile binder, is made of cement, quartz sand, polymer cementing material with a variety of additives through mechanical mixing. Tile adhesive is mainly used as an adhesive for bonding tiles and face tiles, also known as polymer tile bonding mortar. [1] This tile adhesive completely solves the problem that there is no high-quality special adhesive material to choose from in the pasting construction of ceramic tiles, floor tiles and other materials, and provides a new and reliable ceramic tile special adhesive product for the Chinese market.

Product features 1. High bonding strength and fast hardening speed, which can greatly improve the service life and decorative effect of various paving materials. 2. The construction is convenient, and it can be used only by processing an appropriate amount of water and stirring. The tiles to be pasted do not need blisters, and can be pasted directly.

3. Excellent compressive and tensile strength, water resistance, alkali resistance and weather resistance, not affected by the environment. 4. Good workability, good water retention, workability and flow resistance. During the bonding process, the tile can be adjusted for 10 minutes and operated for 60 minutes.

5. The ultra-thin layer construction can be realized, and the coating thickness is less than half of the traditional process, which saves costs and reduces the shrinkage rate, and will not cause the cracking and falling off of the decorative adhesive surface due to force. 6. Non-toxic, tasteless, non-polluting, it is a real green and environmentally friendly product.