How to tile the wall that has been painted with putty?

Updated on home 2024-07-11
18 answers
  1. Anonymous users2024-02-12

    How to tile the wall that has been painted with putty? putty powder wall how to stick wall tiles; Before the construction of the tile project, the putty layer must be batched, if the putty powder has been scraped before the construction of the floor tile project, the putty powder must be removed, otherwise it will plant many potential safety hazards on the back tiles. After the putty powder layer is scraped, you can use the waterproof material to paint a layer on the wall, and after the waterproof material is done, then carry out the tiling, the wall of the large living room of the bedroom can not be painted moisture-proof, but the bathroom and its dining room kitchen wall is best to do moisture-proof tiling.

    What solutions must be carried out for wall tiling; Before the wall tiles we have to remove the bottom layer, and then the lime powder wall paint on the wall, wallpaper and other items all need to be cleaned up and tidy, because the floor tiles are to use sand and concrete, if putty powder is used, putty is added to the middle of the wall and wall tiles, it will directly affect its adhesion, and the floor tiles are likely to separate and crack for a long time, so the particles of the wall must be removed before tiling.

    At the time of the floor tiles, it is necessary to check whether the floor tiles are up to standard, if there are gaps in the wall, in this case, the gaps should be announced first and then the wall tiles should be pasted, if the gaps are not repaired immediately paste the wall tiles, the floor tiles are also a kind of damage. In the process of sticking floor tiles, it is generally necessary to carry out sufficient soaking work of wall tiles, so paste the porcelain.

    cleaning the surface of the wall; Before the wall tile is pasted, the bottom layer should be removed, and some items such as quicklime powder, wall paint, wallpaper and other items on the wall should be removed neatly, because the tile must be made of crushed stone to synthesize concrete, so that the adhesion is improved, but if putty powder is used, the putty is sandwiched between the wall and the wall tiles will directly affect the adhesion, and it will be very easy to separate and crack after drying, so it should be shoveled off before pasting the tile.

    Check whether the wall tiles are up to standard; If there are gaps in the wall, be sure to repair the wall before you can paste the tiles, otherwise after a long time, the gap will become larger and larger, which will cause the wall tiles to crack or fall; In addition, if the flatness or vertical angle of the wall is quite different, it is also necessary to use cement slurry to carry out ground leveling, and then you can carry out tiling.

  2. Anonymous users2024-02-11

    If you want to paste tiles on the wall that has been brushed putty, you should first cut the wall clean, remove the putty on the surface, and then clean the wall and dust, and then the wall is solid and adhesive, and you can paste the tiles after the wall is completely dry, as long as there is no hollow drum is pasted.

  3. Anonymous users2024-02-10

    When tiling, you need to polish the wall, and make the wall look very calm, so that the tile is the best, and it will not cause the tile to fall.

  4. Anonymous users2024-02-09

    When pasting tiles, you can choose tile adhesive, so that it is not easy to fall off after pasting tiles, and it is also relatively firm, not easy to hollow.

  5. Anonymous users2024-02-08

    Remove the putty layer. The place where the tile needs to be pasted should be easy to brush the putty layer with water and then remove it with a dust knife. After removing the putty layer, try to clean the wall as much as possible, and then roll the primer on the wall so that you can stick the wall tiles.

    If you don't do the above, your wall tiles will not be firm after they are pasted. Scrape off the latex paint, and if you plan to apply the tile with a thin sticker, you need to check whether these two points meet the requirements. If it does not meet the requirements, the wall needs to be treated accordingly, and the tiles can be applied only after meeting the requirements.

    With the continuous improvement of living standards, people have a new pursuit of home decoration. It turns out that the putty on the wall was refurbished for various reasons. The walls are tiled and look stylish and beautiful.

    When the walls are dirty, it is clean with a damp towel. Especially the process of shoveling putty is more troublesome. Some people say it's easier to shovel walls with water, and that's right!

    But it's just that it's not easy to shovel the older putty walls, as well as those that have just been scraped and want to change the tile decoration. Therefore, the wall is plastered with putty first, and tiles are pasted behind.

    The landlord said that there was no way to change it, so he could only change it. As we all know, tiles are generally pasted on cement walls, so how can tiles be pasted on walls that have been brushed with putty? The original wall was shoveled by hand, and if the tempered paint was sprayed with water and the wall was soaked, a shovel was used.

    In fact, the shovel is quite fast, so be sure to shovel it clean. But that doesn't mean it's okay to just lay tiles on the wall. Special treatment must be done to make the wall tiles fully meet the requirements of paving before they can be laid, so that the tiles laid on the wall can ensure the quality.

    Generally speaking, on the wall surface of the original putty, it is necessary to remove the putty at the bottom layer, that is, to clean the original plastering layer.

  6. Anonymous users2024-02-07

    We should prepare cement, and we should make the walls, and we can also live the cement, and then we should put tiles, the method is very simple, and it is also very good.

  7. Anonymous users2024-02-06

    In fact, we can apply a layer of cement glue on the wall with putty, and then paste the tiles, which will be very good and very convenient.

  8. Anonymous users2024-02-05

    Brush a layer of cement glue on the putty wall, so that it will be more convenient to paste the tiles again, and it will also be very firm.

  9. Anonymous users2024-02-04

    The wall should have a certain strength, and it should also be particularly flat, so that it can be tiled, and the effect will be particularly good.

  10. Anonymous users2024-02-03

    The wall that has been painted with putty should be swept clean before tiling. The putty layer should be scraped before the bricking construction, and if the putty has been scraped before the bricking construction, then it needs to be removed, otherwise it will bury a lot of hidden dangers for the later tiling. After the putty layer is scraped, we can apply another layer of waterproof paint on the wall, and then paste the wall tiles after the waterproof paint is dry.

    The walls of the bedroom and living room can be left unwaterproofed, but the walls of the bathroom and kitchen should be tiled.

    1.Tiles need to be laid before laying, which is the so-called pre-laying, mainly to calculate the amount of tiles laid to see the laying effect. Once the relevant highly elastic lines are marked, they are ready to be pasted.

    Many tiles have to be soaked in water before pasting, and they can only be taken out to dry after no bubbles come out. That's about two hours. The key to tiling is the adhesive material, that is, cement mortar, which must be proportionally proportioned when blending, requiring uniformity and no bubbles.

    2.We need to clean the base layer before plastering the wall, and then we need to clean all the things such as lime latex paint, wallpaper and other things on the wall, because tiles need sand and concrete. If putty is used, it will affect its adhesion to walls and wall tiles.

    Over time, the tiles may fall off and crack, so be sure to remove the particles on the wall before applying tiles. When applying tiles, check whether the tiles are qualified. If there are cracks in the wall, in this case, the cracks should be announced before tiling.

    If the cracks are not repaired, directly applying the tiles is also a kind of damage to the tiles.

    3.If we have putty on our walls, we have to remove all the putty before pasting the wall tiles. Remember, this is to be cleaned up, and there should be no residue.

    Ordinary putty is very simple, it can be shoveled off after washing, and it is easy to shovel off, and then it is also easy to clean up. Water-resistant putty is more troublesome and has to be sanded off with a special polishing machine. The above is the answer to the question of how to tile the wall that has been painted with putty.

  11. Anonymous users2024-02-02

    You can sprinkle some water on the ground, so that you can put the tiles well, and it will make the tiles look very neat and beautiful, you can choose gray tiles, you can also choose some black tiles.

  12. Anonymous users2024-02-01

    When pasting tiles, you need to scrub the dust on the wall with a rag first, and then paste the tiles along the corners in turn.

  13. Anonymous users2024-01-31

    First remove the oil and dust, sprinkle water on the place where the tiles are glued, then scrape the putty off with a knife, clean the wall, and put some interface agent on the wall to paste the tiles.

  14. Anonymous users2024-01-30

    If we plan to apply the tiles thinly, we need to check that these two points meet the requirements. If it does not meet the requirements, it is necessary to treat the wall accordingly, and the tile can only be pasted after the requirements are met. With the continuous improvement of living standards, people have a new pursuit of home decoration.

    The original putty on the wall, for various reasons to redecorate, choose the wall to paste tiles, look fashionable and beautiful, the wall is dirty with a wet towel gently wiped very clean.

    In particular, which process is more troublesome to shovel out putty. Some people say that it is easier to wet the wall with water, and that's right! But it's only for the older putty wall, and which ones have just been scraped and want to change the tile decoration is not what is easy to shovel?

    That's why I put putty on the wall first, but then I want to put tiles on it. The landlord said that there was no way to change it, so we could only change it. As we all know, ceramic tiles are generally pasted on cement walls, so how to paste tiles on the walls that have been brushed with putty.

    The original wall used to be made with a batch of scraping tempered coatings, there are batches of putty, manual shovels, if the tempered paint, the wall is sprinkled with water and soaked on the line, shovel it off with a shovel, in fact, the shovel is also very fast, must be shoveled clean. But it is not that you can just pave the tiles directly on the wall, you must do special treatment, so that the wall can fully meet the requirements of tile paving, and then you can pave the tiles, so that the tiles on the wall can ensure the quality.

    Generally speaking, on the wall of the original putty, the putty needs to be removed to the bottom, that is, it is necessary to clean up to the original plastering layer that can be seen, if it is ordinary paint putty, it is easy to deal with, use a professional shovel knife to spray water on the original wall to humidify, you can simply dispose of it!

    However, it will not take two or three years to repaint the putty and the same status quo will appear, and the wallpaper and wall cloth will only give the "emperor a new dress", and will not substantially solve the problem.

  15. Anonymous users2024-01-29

    If you want to stick wall tiles, you must first polish the putty, otherwise the putty is too smooth and the tiles will fall off easily.

  16. Anonymous users2024-01-28

    Tiles are only pasted up in the kitchen, bathroom, and laundry room. After I built it 10 years ago, I was helped by a friend who helped me find a real estate developer construction team to help me paste. I even want to paste on the putty layer wall, which is purely child's play, and it is purely a waste of tile money, cement mortar money, and pasting costs.

    This method of water is not advisable, and there is a safety risk of falling off after pasting, so it must not be done in this way.

    Because putty powder is only a wall decoration material, although it has a certain bond strength, it cannot be compared with concrete, and it will fall off after being wet, and its load capacity cannot withstand the weight of floor tiles! In recent years, more and more people will choose "floor tiles on the wall", laying tiles on the walls of the living room and dining room, abandoning the traditional latex paint, wallpaper and wall cloth.

    Which construction method is stronger? This is related to many factors, such as the quality of the tile, the size of the gap in the tile paving, the soaking time of the tile, the construction technology and method of the tiling master, the mixing of cement mortar, the amount of cement, the various problems and construction methods of the tile are also very well understood. Which construction method is stronger?

    The easiest way is to first roll the putty layer with varnish, and after drying, cover the walls with newspaper on the putty layer, and then paste the tiles with structural adhesive or other glue products on the newspaper. Anyone who tells you that you can keep the wall glue of their house is not pretending to know how to fool you into buying his glue. The surface of the putty itself that you can see will lose powder, and you can't guarantee the bottom layer.

    Ecological Luyi replied: Putty can't stick to bricks, clean up the putty and chisel the wall. Before construction, the waterproof and moisture-proof wall should be done first, because the water absorption rate of the whole brick is usually more than 9%, but immediately after the waterproof construction, sprinkle a layer of fine sand, or sprinkle pure cement slurry after drying, and then paste the brick, in order to ensure the firmness of the wall tiles.

  17. Anonymous users2024-01-27

    Yes, the wall can be shaved, then applied with cement mortar, and then tiled to make it very firm.

  18. Anonymous users2024-01-26

    The adhesive of wall tiles is generally carried out on the plastering surface. Due to the fact that at this stage, the vast majority of regional wall tiles are all selected thin paste methods. That is, use the commonly used tile adhesive, scrape a thin layer on the wall, and then scrape a thin layer on the back of the floor tile.

    After that, you can put the floor tiles and stick them directly to the wall.

    The adhesive of wall tiles is generally carried out on the plastering surface. Due to the fact that at this stage, the vast majority of regional wall tiles are all selected thin paste methods. That is, use the commonly used tile adhesive, scrape a thin layer on the wall, and then scrape a thin layer on the back of the floor tile.

    After that, you can put the floor tiles and stick them directly to the wall. If the tempered paint, the wall is sprinkled with water and wet, and it is shoveled with a batch of knives, and it is actually shoveled out quickly.

    Be sure to shovel it clean. Otherwise, the shovel is not clean, the lower half of the tile is pasted, the putty powder of the interior wall that cannot be shoveled will be powdered, and the mixed mortar can not be efficiently integrated with the wall, which may cause the wall to crack. After shoveling through the wall, the wall will drop powder and sand, be sure to brush the wall solid, until the wall can not sand off the powder, the wall is not detailed here, it mainly has the effect of waterproof putty.

    In order to better make the wall tiles more solid, after the wall is solidified, a layer of brushing agent can also be brushed.

    It is not easy to go wrong with the tiles in the back, provided that the professional skills of the tiling master are better. It turns out that the putty powder on the inner wall on the wall has added concrete to it, so it is more laborious, and it is so laborious that you begin to doubt life, impact drills, electric scripts, knocking, beating, grinding, and all the expatriates sometimes can't eliminate how much money it costs! In order to better stick the expected goal of the quality of wall tiles,You'll have to keep going to the bottom!

    If it is a large area, it is recommended to ask someone to deal with it, the effect is better!

Related questions
5 answers2024-07-11

Wallpaper, wall stickers and wall paintings, to make a comparison for you: >>>More

8 answers2024-07-11

To say the TV backdrop.

There are certainly countless ways to design it in different needs and conditions. However, there are always ways to do it. Here are 7 ways to make your big white wall instantly worry-free. >>>More

14 answers2024-07-11

More and more people are pursuing a break away and want an elegant house. Don't have too complicated designs, just choose a few eye-catching pieces of furniture. For large white walls, the use of lines to decorate can be said to be a simple and beautiful treatment, and the cost is cheap, but the whole effect is created. >>>More

6 answers2024-07-11

There are many ways to decorate the wall, among which the wallpaper is loved by many people, because the material and color of the wallpaper are very many, so the decoration is very strong, which can make the home environment more beautiful, but if the wall is damp or has other stains, it will be easy to turn black, so how to clean the wallpaper when it is dirty and black? >>>More

16 answers2024-07-11

If the TV wall is relatively small, within 3 meters in length, it is proposed to make a large white wall, so that the TV wall and the adjacent wall decoration are unifiedHarmonious, I think it's more, if you do other colors, it will look like the TV wall is smaller. Easy layout of TV cabinets, greenery, or artwork. If you do projection, you also propose to make a big white wall. >>>More