What to do with the tiles that have been pasted before they can be used again?

As we all know, cement mortar is generally used for tiling, but in recent years, there have been more tile adhesives on the market, and I don't know which one is better to use!

Let's look at the cement mortar first, that is, it is mainly cement, add yellow sand and some waterproof additives, and then stir with water, which is basically zero pollution, high adhesion, and preferential treatment.

But the bad thing is that cement mortar is affected by many external factors and is easy to fall off. In addition, the hardness of tiles on the market is getting higher and higher, and the focus is on poor water absorption, so the tiles often fall off.

From the appearance, tile adhesive and cement are almost the same, mainly mixed with water, and then directly used to paste tiles. However, tile adhesive has an advantage that cement does not have, that is, it is less affected by external factors, and it is resistant to low temperature and water. The bad point may be that it is expensive, and there are many bad tile adhesives on the market, and there may even be the problem of excessive formaldehyde.

Compared with cement and tile adhesive, the adhesive performance of ceramic tile adhesive will be better, the point is that you don't need to run the tile in advance, you can paste it directly. There is no need to paint a thick layer on the wall, and it is basically very firm when pasted on.

Of course, good things are generally expensive, so there is no need to use tile adhesive in all places, you can use it in the kitchen and bathroom, because these places are often wet, and it is easy to fall off with general cement.

If the cement that binds the tiles can be shoveled down, it can be used again, otherwise it cannot be used.

In this case, it is enough to directly remove the ash material from the plastic equipment department and reuse it directly.

Knock it up and clean the cement on the back before you can use it again.

What's the matter, let's talk about it in more detail and everyone can help you solve it, or the next picture.

Tiling this requires craftsmanship.

It is generally recommended that it is not allowed to re-knock down and paste, because the tile is very fragile, and it will be damaged a lot in the process of knocking, and the gloss or something.

1. The construction procedure of wall tile pasting.

Wall ceramic tile pasting is one of the main technical jobs engaged in by bricklayers in home decoration projects. The pasting procedure of the wall ceramic tile specification is: base cleaning treatment, plastering the bottom ash, selecting bricks, soaking, arranging bricks, elastic line, pasting standard points, pasting tiles, hooking joints, wiping joints, and cleaning.

The construction must be carried out in strict accordance with the standard procedures in order to ensure the quality.

2. Construction specifications for wall tile pasting.

1) When the base layer is treated, all kinds of dirt on the wall should be cleaned up, and watered and moistened one day in advance. If the base layer is a new wall, when the cement mortar is dry, it should be arranged with bricks, elastic lines, and pasted surface bricks.

2) Before the formal pasting, the standard point must be pasted to control the flatness of the pasting surface, and the flatness should be checked with a ruler at any time during operation.

3) The tiles must be soaked in clean water for more than two hours before pasting, and the bricks should be taken out to dry for later use. When pasting, paste from bottom to top, require the mortar to be full, when the ash is lost, it must be removed and re-glued, and it is not allowed to plug the ash from the brick joints and mouths.

4) When laying and sticking, when encountering pipelines, lamp switches, and supporting parts of toilet equipment, etc., they must be cut and matched with a whole brick set, and it is forbidden to use non-whole bricks to patchwork and paste. The whole or independent parts should be pasted at one time, and when it cannot be completed at one time, the stubble should be left at the construction joint or the dark corner.

OK. If it has just been pasted, it is okay, but if the strength of the cement has been reached, it is estimated that it will not be possible, because if it is removed, the brick will be damaged.

If the cement has dried, there is no way to remove the tiles completely, otherwise it is not easy for each tile to fall off, and you have to knock it off and start over again if you want to repaste.

Once the tiles are pasted, they can be removed and re-pasted.

Yes, if you do it, you will be more troublesome and have to spend some money.

Soon after the cement mortar has not completely solidified, it can be completely removed and re-pasted on the wall, and there is no way to dry it, and the probability of breaking it is very large.

Yes, if you are worried about the instability, you can use professional adhesive brick glue.

Summary. The pro can be exchanged.

The tiles have already been pasted, can I still change the tiles?

The pro can be exchanged.

The tile which has been attached to the ground can be replaced. It is difficult to replace only a few floor tiles, because it is almost impossible to match the same color, model and style of floor tiles over the years. If the original floor tiles have been partially damaged, hollowed out or falling off, the surface enamel has been worn, or seriously dirty, it must be removed and replaced.

At present, there are two kinds of brick wall renovation materials on the market: tile surface treatment agent, tile and mosaic binder, which can be directly painted on the old brick surface, and then paved with new floor tiles, saving time and energy. Kitchen and bathroom floors, regardless of the type of tile, can be directly tiled with new tiles on top of the old ones. Extended information tile paving precautions 1, before paving, should first deal with the object to be pasted or the ground level, dry paving method of the base layer to reach a certain hardness before the silver can pave tiles, paving the seam between 2-3mm adjustment.

2. Before paving the belt, the tile needs to be soaked in clean water for 20-30 minutes, and the water can be filtered before it can be paved, otherwise the water will evaporate after the paving is done, and the tile will easily warp. Moreover, before use, you should check whether the color number and size indicated on the outer packaging are the models you ordered, and whether the bricks with a unified color number have defects such as color difference and broken threads. Only by using a uniform color number can you make a look.

Some friends want to renovate, just want to put new tiles on top of the old tiles, can this be done?

1. Can new tiles be directly pasted on the old tiles?

You can't put new tiles directly on top of the old tiles, because if you do this, there are many disadvantages in the later stage. After all, it is an old tile, after a long time, there will be a lot of cracks or arching on the surface, if you do not deal with it in time, you will directly paste the new tile, which will cause the new tile to be very unstable, and the tile will have the problem of hollowing off.

And the surface of the old tile is relatively smooth, although the adhesive can be used, such as pasting the new tile through the tile adhesive, the effect is not particularly ideal, it is easy to cause the new tile to fall down directly, but it will cause economic losses, and the later need to spend a new price to paste the tile. Therefore, it is a matter that outweighs the loss, and it is not recommended to operate like this, and you must not try to save trouble.

Second, how to renovate the old wall tiles.

If the original old tile is damaged or cracked, we knock it off first, then brush the surface of the wall with a surface treatment agent, and then do a leveling work before laying the new tile. Or knock out all the old tiles, although the project is more complicated, but it can ensure that the later tile effect is better.

Third, it is better to use cement or tile glue for tiling.

1. Tile also needs to choose the right material, if according to the traditional way, mainly cement-based, and tile adhesive belongs to a new type of adhesive, but tile adhesive itself also has the composition of cement, through some other additives, a material formed by scientific proportion. In the current market, in fact, its popularity rate is not particularly high, because compared with cement mortar, it is more expensive.

2. However, compared with the construction, it will be found that the cement tile is basically a wet paste method, and the tile is soaked in water first, and then it can be constructed. The tile adhesive can be used directly, and there are high requirements for the temperature of the construction.

If you want to re-paste the new tiles, then you must remove all the old tiles, and then buy new tiles, and then find a professional to re-paste them, but this is very time-consuming and difficult to operate.

You can directly brush a layer of tile adhesive, directly paste a new tile on it, this should be determined according to the actual situation, different ceramic tiles are treated differently.

If the surface is yellowed, you can put new tiles, and the old tiles are completely unusable. And it doesn't clean the yellowing on it at all.

If the home needs to be renovated, many people want to renovate the tiles, and some people want to put new tiles on the old tiles, can this be done? How does it work? How to paste new tiles on old tiles, first of all, you need to pay attention when choosing tiles, try to choose thin tiles, because if the original tiles are thicker, after the new tiles are pasted, the indoor area will be reduced, and the thin tiles are easier to stick.

In the process of renovating many new houses, it takes time and effort to smash the tiles off the walls. And some houses are very old, and cutting the walls will destroy the structure of the house. Therefore, we can paste new porcelain tiles on top of the old porcelain tiles, and do not need to remove them, and directly paste new porcelain tiles or mosaics, but the surface of the porcelain tiles must be leveled.

If it's a wall tile, it's definitely not going to work. The glaze of ceramic tiles is smooth, directly pasted with new ceramic tiles, and the adhesion between them is not enough, especially when you install them, even if there is a foreshadowing and mirror, there is a downward gravitational force, which is easy to cause the loosening of ceramic tiles, and even fall off, causing potential safety hazards, so when the old house is decorated, the wall tiles must be removed.

If it's a floor tile, you can actually do it too! But you have to be sure that the original floor tiles do not have a large area of hollowing, there is no cracking, warping, etc., and the glaze of the floor tiles has not been seriously worn, in addition, the flatness of the ground does not drop by more than 3mm, and the ability to meet these conditions does not need to be removed, and a lot of demolition and modification costs can still be saved. In addition, it is best to replace the old tiles to solve the phenomenon of hollowing, which can ensure that the later paste is firm, and it is impossible to fall off again in the later stage.

If you want to replace the new tiles, you need to remove the old tiles and level the wall before proceeding.

It can be laid directly, the tiles are relatively flat, need to be cleaned, and can be laid with tile adhesive after cleaning.

It can be polished, and it can also be added with an extra layer of grapefruit, so that it will be the same as the new one, and the appearance will be very good.

Summary. Can I still use tiles that have been reworked for 2 days?

Hello, only the oak next to the color matching, not cracked, there is a little cement on the back of the friends are okay, you can use the hope of the answer can help you, if you have any questions, please feel free to consult Liang Judgment Oak.

The wall tiles of the new house are wrong, two days, the bricks can be shoveled, and there is cement at the bottom after the shovel, and then the bricks can not be shoveled.

Hello Hu Zhao, if there is not much left, the number of pants is rented, which does not affect the flatness, and you can not shovel. I hope the answer can help you, if you have any questions, please feel free to ask.

Because the wall is a little uneven, the cement on the wall has two centimeters, and now the tiles have been taken down, and the two centimeters can be scraped down without shoveling, and then the bricks will be pasted.

The meaning is to be eradicated.

Hello, yes, it must be shoveled.

Thank you. Okay, have a great day!