The reason why the tips of the leaves of the junzi orchid are yellow and dry

See below for how to deal with it

The dry and yellowish tips of the leaves may be caused by too little watering. If you don't water for a long time, the roots of the plant will not be able to absorb nutrients normally, and the leaves of the orchid will dry up and turn yellow. At this time, it is necessary to prune off the dry and yellowed leaves, and replenish water for the monarch orchid to ensure that the potting soil is slightly moist.

Spring and autumn are the growing seasons, this time should be kept moist, so that the plant can grow normally, if you do not water for a long time, the potting soil is too dry, the leaf tip part of the plant will be yellow and dry due to lack of water. In winter, there is not much need for water, and you should not water too much during this period, otherwise the root system of the plant will be affected, and it will also appear yellow and dry. You can control the water and water according to the needs of the plant.

It needs to be fertilized to grow, and if the concentration is too high or the amount of fertilizer is too high, the root system of the plant will not be able to bear it, and the leaves will be affected. It can be diluted by watering, and then pay attention to the amount of fertilizer applied in the maintenance.

The growth of the orchid needs to be supplemented by sunlight, but if the sunlight is too strong, it will burn the leaves, causing the leaf tips to appear yellow, so it is necessary to give sunlight normally, and if the temperature is higher than 30 degrees Celsius, it is necessary to shade half of the light and avoid exposure to strong light.

During the maintenance process, anthracnose may be caused by the hot climate and the lack of ventilation for a long time, and the main symptom is that the tips of the leaves are yellow and dry. This situation requires enhanced ventilation, spraying carbendazim, etc.**.

1. Replenish water.

1. Reason: When cultivating Junzi Orchid, it should be properly replenished, if it is not watered for a long time, the roots of the plant can not normally deliver water to the leaves, and it will dry up in a state of lack of water.

2. Solution: Cut off the dry leaves, and water them properly, and keep the potting soil with sufficient water, but do not have stagnant water. However, there should be no water in the soil, as it will lead to root rot.

2. Irrigation and fertilization.

1. Reason: When fertilizing the Junzi orchid, too much fertilizer will burn its roots, the root system can not breathe and grow, and its leaf tips will dry up.

2. Solution: To water some water in the pot, this is done so that the water will dilute the fertilizer and drain the water. Or change to new nutrient soil and properly control the amount of fertilizer.

3. Reasonable lighting.

1. Reason: It is not suitable for growing under direct light, if the sunlight is too strong during breeding, the evaporation of water in the leaves will be accelerated, and the leaves are easy to dry up if the light is stronger.

2. Solution: It should be transferred to a semi-shaded place for maintenance, or it should be built with an awning without being exposed to strong direct sunlight.

Growth habits. Native to the tropical regions of southern Africa, it grows under the tree, so it is both afraid of heat and not cold-tolerant, prefers a semi-shady and humid environment, is afraid of strong direct sunlight, and the best temperature for growth is between 18-28, below 10, above 30, and the growth is inhibited.

It prefers a ventilated environment and prefers deep, fertile and loose soils, and is suitable for growing in loose and fertile slightly acidic organic matter soils. Monarch orchid is a well-known greenhouse flower, suitable for indoor cultivation.

The leaves of the orchid are yellow and dry, and there is no need to fertilize it, and it will recover by spraying it.

How to deal with the yellow and dry leaf tip of the Junzi Orchid Hello After the yellow leaves of the Junzi Orchid appear, you need to sterilize the tools when pruning, and only cut off the yellowed part of the whole leaf, due to the hypertrophy of the leaves of the Junzi Orchid, in order to avoid the juice flowing out after the pruning is completed, you need to smear the wound with carbendazim or plant ash, and put it in a ventilated and astigmatized position to accelerate the drying of the wound. Pruning the leaves does not solve the underlying problem, and the cause of the yellowing of the leaves needs to be examined and remedied.

If the tip of the leaves of the orchid is yellow and dry, the plant should be moved to a ventilated environment in time, and then observe whether the plant is short of water, and the soil should be watered thoroughly in time when there is a shortage of water.

When it is found that the leaf tip is dry, the symptom should be solved, if it is caused by a small amount of watering, the dry leaves need to be cut off and properly watered to keep the soil with sufficient moisture. If it is caused by too much fertilizer, you need to pour some water into the pot to dilute the fertilizer and drain the pot. If the sunlight is too strong, it needs to be placed in a semi-shaded place for maintenance, and cannot be exposed to direct sunlight.

If you don't water for a long time when cultivating the orchid, the roots of the plant will not be able to deliver water to the leaves normally, and the leaf tips of the orchid will be yellow and dry, so you should cut off the yellowed leaf tips first, and then water the plants, and should not water too much, keep the potting soil moist.

Applying too much fertilizer to the orchid will cause the root system of the plant to be burned out, the root system will not be able to breathe properly, and the leaf tips will turn yellow and dry up, at this time, the fertilizer should be diluted by irrigation in the pot, and then the excess water will be drained from the drainage hole. When the orchid is exposed to direct sunlight, the water in the leaves will be evaporated quickly, resulting in yellowing and drying, so in the usual maintenance process, it is necessary to build an awning for the orchid to avoid the plant receiving direct sunlight.

In the maintenance of the orchid, the hot weather will cause anthracnose, the main symptom is that the leaf tips will be yellow and dry, at this time it is necessary to strengthen ventilation, and timely spraying carbendazim for the orchid for prevention.

Yellowing and drying of the leaf tips includes pruning, reducing moisture, providing light, and so on.

1. Prune.

After the leaves of the orchid are yellow and wilted, they can be pruned. First of all, you need to choose sharp scissors and use alcohol disinfection and sterilization, and then use scissors to cut the yellowing branches and leaves of the monarch orchid and bury them to help the plant save nutrients.

2. Reduce moisture.

At this time, you can dig out the roots of the orchid from the soil, and cut off the rotten parts, and then replant, in the later stage of maintenance, you need to reduce the number of watering, keep the soil in a slightly wet state.

3. Provide light.

Orchid is suitable for growing in a bright environment, if it is placed in a dark environment for a long time, it will cause the leaves of the plant to yellow and wilt, so when breeding, you can move the orchid into an environment with sufficient astigmatism, and when the light is weak in winter, it can also provide full sunshine for the orchid.

How to fix the leaves of the gentleman's orchid?

1. Cardboard fixing.

Cardboard fixing is one of the most commonly used methods of leaf fixing liquid elimination of the Monarch Orchid, the cardboard is cut to about the same size as the Monarch Orchid leaves, slightly wider than one or two fingers or so wide, and then the cardboard is inserted into the leaf gap of the Monarch Orchid, and a piece of cardboard is placed up and down, and the cardboard can be clamped with a relatively large clip.

2. Tin foil fixation.

Tin foil has the characteristics of opacity, and itself has a certain deformation ability, with tin foil smoothly along the outline of the leaves of the orchid to wrap, a little press and squeeze a little, wrap a few more circles. If the tin foil is relatively thin, you can use a thin wire to tie a few circles from the outside of the tin foil to fix the leaves of the orchid.