Safety production precautions, what are the safety production precautions

<>1. Before work, all production staff should wear safety helmets, buckle hat belts, wear prescribed labor protection products, and inspect equipment and work sites to be safe and reliable.

2. When carrying out construction, the spirit should be concentrated, do not operate in violation of regulations, do not play with children's play, and do not chase and fight.

3. It is not allowed to start the machinery and electrical switchgear operated by others without authorization. Wearing safety belts, helmets, and special supervision should be worn during climbing operations.

4. It is not allowed to dismantle all kinds of safety protection devices, signal signs, and instruments at will.

5. All temporary electricity for production and living at the construction site must be erected and managed by a licensed professional electrician, and all other non-mechanical and electrical staff shall not be randomly connected.

6. Lifting objects and pedestrians are not allowed. 7. No smoking or littering is allowed near flammable materials.

8. When working at height, materials, tools and miscellaneous materials should not be thrown up or down at will to prevent injuries caused by object strikes.

1. Formulate safety operating procedures. In the event of an equipment or personal injury incident, you can't simply blame a person or group for being careless. Management must be foreseeable and prepared for the safety of operations and respond quickly to unsafe situations.

It is even more important that safety operating procedures are developed and amended in a timely manner and that safety procedures are enforced.

2. Prevent personal accidents. In order to prevent personal accidents, all machines should be installed with safety shields, product demoulding outlets should have safety doors, the heating area of the machine should have a full and thermal insulation shield, the crusher should have a protective device to prevent steel from falling into, to prevent operators from reaching into the machine protective device, emergency brake buttons and alarms should be installed in key parts of the equipment, and hydraulic tests should be carried out regularly for all pressurized containers.

3. Safety protection of the machine. The machine should be installed with overload protection and safety protection device, the simplest overload protection device is to place a safety pin on the transmission belt reel, once the transmission is generated.

If there is an abnormality, the safety pin is broken, and the machine stops driving.

The concept of "safe production", in a general sense, refers to the harmonious operation of man, machine, material, environment and method in social production activities, so that the potential accident risks and injury factors in the production process are always in an effective control state, and the life safety and health of workers are effectively protected.

That is to say, in order to make the labor process in line with the material conditions and work order that meet the safety requirements, prevent production accidents such as personal and property losses, eliminate or control dangerous and harmful factors, and ensure the safety and health of workers and equipment and facilities from damage, and all behaviors of the environment from destruction.

Safety production is the unity of safety and production, and its purpose is to promote production with safety, and production must be safe. Doing a good job in safe work and improving working conditions can mobilize the enthusiasm of workers in production, reduce the number of workers, and reduce the loss of labor.

Reducing property losses can increase the efficiency of enterprises, which will undoubtedly promote the development of production, and production must be safe, because safety is a prerequisite for production, and production cannot be produced without safety.

Yes, I've received your question here, what is the situation you are encountering now? If it's convenient, you can give me a specific description of the situation you are experiencing, and I can give you some legal advice on my side.

Ask what should be paid attention to in railway cargo loading.

Answer: According to the regulations issued by our country, you must first have this driver's license, and you must also pay attention to the weather conditions, do not drive tired, and then, you also have to pay attention to road safety and learn various laws and regulations, drive steadily, slow down or something.

The safety status and safety performance of the vehicle are qualified. Check the goods in detail, whether the number of items is consistent with the consignment documents, and put the horse neatly and pre-balanced. It should be noted that all kinds of dangerous goods cannot be mixed.

Please check if you are on the road. Be careful with unloading, pollution prevention and be well prepared for emergency treatment, as all sorts of accidents can occur while driving on the road.

In the case of railway transportation, it should be divided into LTL and containers. Then the goods transported by the railway or in batches must be taken off, and the recipient says that the development and at the same point in time, as well as the consignment of the goods by the representative or the entrusting person on the watch. In addition, if the obligation is changed and fulfilled, the consignment of goods transported by any railway shall be subject to a contract with the undertaker.

Answer hello, this question needs a large piece of text to answer, you wait a minute, this question needs a lot of text, you wait a little 1, in accordance with the project post operation regulations, wear safety helmets, safety belts, safety nets and personal labor protection equipment correctly. 2. Establish a complete and reasonable responsibility system for safety production posts, and carry out safety education and training on a regular and systematic basis. 3. Construction safety measures should be comprehensive, effective and targeted.

Supervise the implementation through multiple inspections, and improve the unreasonable areas in a timely manner. 4. The construction of sub-projects should be disclosed to safety technology, and special operations need to be certified to work, abide by rules and disciplines, and illegal operations and blind operations are strictly prohibited.

5. The temporary electricity consumption at the construction site must meet the requirements of the "Technical Specifications for Safe Electricity Use" and be operated and managed by professional electricians. It is strictly forbidden to break the wire, pull and connect indiscriminately, and it is strictly forbidden to replace the fuse with copper wire. 6. The construction electricity is "three-phase five-wire system", and the iron electrical switch box "one machine and one gate" is equipped with anti-leakage and power-off devices.

7. All machinery and equipment on the construction site should be regularly inspected, repaired and maintained to ensure the normal operation of the machinery and tools. It is strictly forbidden to overload 8, and warning signs and protective fences should be set up in dangerous operation sections (such as cliffs) at the construction site, and red lights should be set up at night to remind. 9. Sufficient safety signs and warning signs should be set up at the crossings, job sites and dangerous goods warehouses at the construction site to improve the safety awareness of operators.

10. Strictly control overtime to ensure the combination of work and rest. Lightning and typhoon protection in rainy season construction, fire and freeze prevention in winter construction, and sufficient lighting for night construction. 11. Insist on carrying out safety production activities once a month and carrying out regular safety learning meetings every week, eliminate hidden dangers of accidents in a timely manner, and improve the safety production awareness and self-prevention awareness of all employees.

Production safetyThe precautions are as follows:

1. Please wear work clothes and brand when working, and do not wear sandals, slippers, high heels, vests, skirts and open-knee pants into the workshop.

2. It is strictly forbidden to play and play in the workshop, and it is strictly forbidden to shuttle in the workshop.

3. Wear and use labor protection supplies carefully.

4. The safety requirements of dangerous operations must be strictly observed.

5. It is strictly forbidden to smoke or start a fire in the workshop.

6. It is strictly forbidden to drink alcohol before work and during working hours.

Safety production precautions are as follows:

1. Before the construction personnel enter the construction site, they must carry out the education and assessment of construction safety and fire protection knowledge.

2. When entering the construction site, you must wear a safety helmet, fasten the hat belt, and use personal labor protection equipment correctly.

3. Strictly implement the operating procedures, shall not command and operate in violation of regulations, and have the right to refuse the instructions of illegal operations and have the responsibility to stop others from operating in violation of regulations.

4. During construction operations, you must wear personal protective equipment through the bridge shed correctly, and you must wear a safety helmet when entering the construction site. It is forbidden to use fire without permission, and it is strictly forbidden to operate after drinking.

5. Wearing slippers, high heels, barefoot or shirtless is not allowed to enter the construction site.

6. Wearing hard-soled shoes is not allowed to carry out climbing operations. <>

7. When working at high altitudes, steel bars, and structures, be sure to wear non-slip shoes.

8. On-site electricity must be managed by a special person, and a special distribution box must be set up at the same time, and it is strictly forbidden to connect and pull indiscriminately, and adopt a power listing system, especially to eliminate illegal operations, and prevent the occurrence of personal, line, and equipment accidents.

9. Electric drills, electric hammers, electric welding machines and other electric equipment, distribution boxes must have leakage protection devices and good grounding protection ground, all electric tools and cables must be regularly inspected to ensure good insulation, and insulated shoes and insulated gloves should be worn when using electric equipment. <>

10. The safety voltage below 36 volts must be used for the construction lighting of the construction site, and all electrical appliances and tools must be cut off at any time when not in use to prevent the equipment from being burned out.

11. In places where blowtorches, welding machines and necessary fires are used, it is necessary to fill in the fire application registration and set up a special person to supervise it, and bring fire-fighting equipment to ensure the implementation of fire-fighting measures. When welding, pay special attention to check whether there are flammable materials below, and do a good job of corresponding protection, check after use, and then leave after confirming that there is no fire.

12. Those who have passed the safety education and training shall not be allowed to work, and non-operators are strictly prohibited from entering the dangerous area; Special operations must be carried out with a special operation qualification certificate.

13. Where there are no safety facilities for high-altitude operations above 2m, safety belts must be fastened; Seat belts must be fastened before operation.

14. Objects such as materials and tools for working at heights shall not be thrown up or down.

15. Personnel engaged in high-altitude work should experience it regularly. Personnel who suffer from high blood pressure, heart disease, anemia, epilepsy and are not suitable for working at heights are not allowed to work at heights.

Safety precautions include the development of safe operating procedures, the prevention of personal accidents, and the safety protection of machines.

Formulate safety operating procedures: in the event of equipment or personal injury, you can't simply blame a person or a group for carelessness, the management department must have a foresight and preparation for the safety of the operation, and have a quick response to unsafe situations, and more importantly, formulate and correct safety operating procedures in a timely manner, and the safety procedures must be enforced.

Prevention of personal accidents: In order to prevent personal accidents, all machines should be equipped with safety shields, product demoulding outlets should have safety doors, the heating area of the machine should have a full and thermal insulation shield, the crusher should have a protective device to prevent steel from falling into, to prevent operators from reaching into the machine, emergency brake buttons and alarms should be installed in key parts of the equipment, and hydraulic tests should be carried out regularly for all pressurized containers.

The safety protection of the machine: the machine should be installed with overload protection and safety protection device, the simplest overload protection device is to place the safety pin on the transmission belt reel, once the transmission is abnormal, the safety pin is broken, the machine will stop the transmission, the constant temperature start protection device, the constant temperature starter is placed on the extruder, if the extruder does not reach the set heating temperature, even if the start button is pressed, the extruder can not start.

Extruder safety explosion-proof device, the explosion-proof diaphragm of the device can withstand a certain range of melt pressure, the magnetic frame is installed in the extruder hopper, the magnetic field of the permanent magnet is used to prevent steel and metal debris from entering the extruder.

The basic principles of safe production

1. The principle of "people-oriented".

It is required that in the production process, the principle of "people-oriented" must be adhered to. In the relationship between production and safety, safety is the most important thing, and safety must come first. It is necessary to analyze the source of danger in advance, evaluate the danger and harmful factors, grasp the law and change of danger, take corresponding preventive measures, and eliminate the danger and safety hazard in the bud.

2. The principle of "who is in charge, who is responsible".

The importance of safety production requires that the person in charge must also be the responsible person and fully fulfill the responsibility for safety production.

3. The principle of "safety must be managed in production".

It means that leaders at all levels and all employees of the project must insist on doing a good job of safety while grasping production in the production process. He realized the unity of safety and production, production and safety are an organic whole, the two can not be separated, let alone opposed, safety should be contained in production.

4. The principle of "security has the right of veto".

It refers to the safety production work is a basic content of engineering project management, which requires the assessment of various indicators, and the completion of safety indicators must be considered first when evaluating excellence and innovation. If the safety indicators are not achieved, even if other indicators are successfully completed, the optimization of the project cannot be achieved, and security has the effect of vetoing.