What are the hazards of belt conveyors and how to prevent them. 20

1: The power supply conveyor should not be exposed to rain, prevent the motor switch from entering the water, and the wire should not have a joint!

2: Whether there is a pulley in the main drive drum of the machine, if there is one, do not remove the belt cover or if it is damaged, so as not to cover it.

3: Don't walk or stay under the machine while the machine is running!

4: Don't lose oil in the electric lift!

5: The oil filament should be replaced in time if it is worn!

6: Don't move the machine after it is raised, try to lower the height of the machine if necessary!

Frequently check whether the operation is normal, whether there is abnormal noise, and stop and eliminate the fault in time.

Summary. Hello dear, glad for your question oh <>

About: What risks and preventive measures may exist in the work of the belt conveyor post: What risks and preventive measures may exist in the work of the belt conveyor post are as follows:

1. The belt wear exceeds the limit, and the belt driver of each shift should carefully check the wear and tear of the belt, and find that the belt has a large break or the edge is worn through, and the belt card or replacement should be replaced in time 2, the belt deviation belt driver should take care of the belt, and adjust the deviation in time when the belt deviates 3, the belt protection failure is checked every day to pull the rope protection, the deviation switch and other protection actions are sensitive and reliable, and the action is not activated or replaced in time when the action is not sensitive4, the belt corridor is iced, and the anti-freezing measures are taken, and the ice is found to be cleaned up in time 5, Cleaner failure each shift belt driver to check the cleaner, found that the belt cleaner failure to replace in time 6, floating coal accumulation each shift to send 2 special personnel to clean, one person to take care of, one person to clean, strictly prohibit coal dust accumulation each shift to carefully check the belt buckle, found that the belt buckle wear or damage to timely 7, belt buckle wear, damage report replacement treatment.

What risks may exist in the work of belt conveyor posts and preventive measures.

Hello dear, glad for your question oh <>

About: What risks and preventive measures may exist in the work of the belt conveyor post: What risks and preventive measures may exist in the work of the belt conveyor post are as follows:

1. The belt wear exceeds the limit, and the belt driver of each shift should carefully check the wear and tear of the belt, and find that the belt has a large breach or the edge is worn through to play the belt card or replace it in time 2, the belt deviation belt driver should take care of the belt, and adjust the deviation in time when it deviates 3, the belt protection failure is checked every day to the sensitivity and reliability of the rope protection, deviation switch and other protection actions, and when the action is not active or the action is not sensitive, the elevator is changed in time 4, the belt corridor is iced, and the anti-freezing measures are taken, and the ice is found to be cleaned up in time 5. Cleaner failure each shift belt driver to check the cleaner, found that the belt cleaner failure to replace in time 6, floating coal accumulation each shift to send 2 special personnel to clean, one person to take care of the early, one person to clean up, strictly prohibit coal dust accumulation each shift to carefully check the belt buckle, found that the belt buckle is worn or damaged in time 7, belt buckle wear, damage report replacement treatment.

Supplement: Belt conveyor, also known as belt conveyor or rubber town reed belt conveyor, is an indispensable economic excavation logistics conveying equipment for the formation of a rhythmic assembly line. According to its conveying capacity, the belt conveyor can be divided into heavy-duty belt conveyor, such as mining belt, Yuzhi conveyor, and light-duty belt conveyor, such as used in electronic plastics, food, light industry, chemical and pharmaceutical industries.

What are the potential safety hazards of the belt conveyor, please describe it clearly.

Hello dear<>

Answer: The belt conveyor has three dangerous slag points under the late journey. First, the belt conveyor head, tail and guide roller must be placed with a protective fence and the protective fence must be sensitive and reliable. Second, it is forbidden to go up to people and other items when the belt is running.

The belt transport driver must concentrate on avoiding the slippage of the belt due to the material during the normal operation, such as the transfer. Third, when the belt is running normally, it is strictly forbidden for post workers to clean the running parts to avoid safety accidents.

List 3 sources of danger in the maintenance of belt conveyors Hello! The pro-belt conveyor has the following three major danger points. First, the head and tail of the belt conveyor, including the guide roller, must be placed with a protective fence, and the protective fence must be sensitive and reliable.

Second, it is forbidden to go up to people and other items when the belt is running. Belt transport drivers must concentrate to avoid slipping due to Chang material large belt slippage during normal operation. Third, when the belt is running normally, it is strictly forbidden for post workers to clean the running parts to avoid safety accidents.

Hello, what are the main risk factors in the operation of belt conveyor? The belt is on fire, and the rotating parts of the head wheel and tail wheel are harmful to the human body. Electrical leakage.