What are the precautions for safety production in the summer workshop

Safety of electricity use.

In the hot summer weather, people wear thin clothes and sweat a lot, which correspondingly increases the risk of electric shock.

In addition, during this period of humidity and rain, the insulation performance of electrical equipment has been reduced, and the temporary electricity and hand-held power tools at the production site should be tested and inspected before use, and they can only be used after meeting the electricity standards; Safe voltage lighting must be used to enter the container; Electrical workers must be certified to work.

1. Employee safety. Please wear work clothes and brand when working, and do not wear sandals, slippers, high heels, vests, skirts and pants that show your knees into the workshop.

2. Employee safety. Wear and use labor protection equipment carefully and correctly. The safety requirements for hazardous work must be strictly observed.

It is strictly forbidden to drink alcohol before and during working hours. During work, you should concentrate and do not do anything unrelated to your work. Make sure there are no other people or machines around during the use of a forklift.

3. Employee safety. Operate carefully in the work, strictly control the process conditions, and report unsafe factors to the team leader and supervisor in a timely manner. Consciously abide by all safety systems in the company and the safety operation procedures in this type of work, and shall not operate in violation of regulations.

4. Employee safety. It is the responsibility of every employee to be aware of the safety situation around them, and when you notice unsafe behavior from others, or unsafe environmental factors, you must take immediate action to stop and correct them. It is necessary to remind each other when discovering potential safety hazards to avoid safety accidents.

5. Equipment security. After the equipment is used, when it is not used for a long time or when it is off duty, the power switch should be disconnected. Before leaving work every day, the team leader of each position in the workshop should be responsible for inspection.

It is necessary to protect and manage the use of production equipment, tools and safety devices to keep them in good condition, and report to the team leader in time when problems are found.

Answer 1: All employees must establish a good sense of safety. Always maintain the awareness of protecting the personal and property safety of the company and individuals; 2. Before and after clocking in and out of work is non-working time, and each employee should do their own safety. Pay attention to anti-robbery, anti-theft, anti-car accidents, anti-fraud, anti-virus, anti-violence, and ensure safety on the way to and from work; 3. When there are less than 3 office personnel, the outgoing personnel should signal and remind the left-behind personnel.

Finally, the person who leaves should check whether the office doors and windows are closed, whether the electrical appliances are closed, and lift the handle up to lock the door after closing the door, and only leave after confirmation. If there is any abnormal situation, contact the company's leaders in time to deal with it; 4. Financial personnel should pay attention to whether there are suspicious circumstances in the surrounding environment when entering and exiting the bank, especially when conducting cash transaction business, at least two people must handle it, and must ensure personal safety and property safety; 5. Engineering and technical personnel must have a sense of safe operation during the construction process. Pay attention to the safety of electricity and fire, correctly standardize the use of various appliances to prevent injuries to yourself or others, especially when climbing (more than 2 meters away from the operating platform), you must be cautious and concentrate on operation to prevent all accidents; 6. The warehouse staff must do a comprehensive inspection of the warehouse every day, including theft, fire, flood and other unsafe hidden dangers, and eliminate them in a timely manner. 7. The personnel who send and receive the goods must ensure the integrity of the goods, do a good job in the records and signature procedures of the handover of the goods, and must sign for the receipt with real names.

Do a good job of not losing, not damage, safe and reliable; 8. When traveling to other places, in addition to paying attention to the safety of workplace operations, we should also pay attention to the safety of car, food and accommodation. Unless there are special circumstances, you are not allowed to go out at night.

Safety precautions in winter.

With the advent of winter, dry weather, strong winds, dense fog, freezing and other bad weather frequently occur, which will have a certain impact on production safety. In addition, the winter is at the end of the year, and the heavy tasks are very easy to produce paralysis, luck, and slackness, which increases the momentum of frequent and easy occurrence of various production safety accidents, which must be clearly understood and treated rationally. In order to do a good job in safe production this winter and next spring, and resolutely curb the occurrence of all kinds of accidents, we must pay attention to the following points

1. Pay attention to preventing paralyzing thoughts.

The weather is unpredictable, people's hearing, vision, action, and emotions begin to be affected to a certain extent, and the mind is very easy to relax. To this end, we must improve the ideological understanding of employees, strengthen warning education, strict safety production responsibility system, effectively strengthen the management of leadership, implement responsibilities, and promote the steady improvement of employees' production and work status.

2. Pay attention to fire and explosion prevention.

In winter, the air is dry and dry, prone to fire, causing explosion accidents, before the fire operation to perform the fire declaration system, pay attention to the surrounding environment, confirm safety, do a good job in fire prevention, and prevent the occurrence of fire accidents.

3. Pay attention to anti-freezing.

In winter, the weather is very cold, and the temperature difference between indoor and outdoor is large, so we must pay attention to cold protection and keep warm.

Fourth, pay attention to anti-slip and anti-falling.

The scaffolding ladders and treads at the production site are easy to freeze when they encounter rain or snow, and they are easy to slip and fall when working up and down the stairs or scaffolding, so attention should be paid to cleaning up the stagnant water or snow in time. At the same time, it is also necessary to spread straw mats in slippery places to implement anti-slip measures. Snow weather and ice accumulation in the workplace are generally not allowed to climb the height, in order to prevent falling, must work should be cleared of snow, ice should be removed, set up anti-skid measures, and wear good labor protection equipment.

At the same time, do a good job in fixing and preventing falling of tools and tools to prevent falling and injuring people.

Fifth, pay attention to windproof.

In windy weather, all open-air lifting equipment must be in place after shift, and the iron brake, rail clamp or anti-skid device, and anchor ingot must all be in place, and the driver should be notified to lock the doors and windows, cut off the power supply, and get off the door machine safely; Check the cable boarding ladder of the wharf mooring ship, and take measures to prevent rain and anchor in the cabin of the ship under construction.

6. Pay attention to prevent mechanical injury.

In winter, when the weather is cold, colleagues in long coats need to prevent their clothes from being hinged into the machine and injuring people.

7. Ensure sufficient light for night work.

In winter, the days are short and the nights are long, and the lighting equipment is used for a long time, so it is necessary to pay attention to the timely inspection and maintenance of the lighting facilities on the road, workshop and operation area where employees commute to and from work, so as to ensure that the lighting facilities are intact and prevent safety accidents due to poor lighting.

Of course, the specific situation of safety production in each operation area and each post is different, the existing problems are not the same, and the measures to do a good job in safety production in winter are not the same, which requires us to improve the awareness of safety production at all times, everywhere, and in everything, overcome the idea of paralysis and carelessness, and take various effective measures to eliminate all kinds of unfavorable factors brought by winter safety production, so as to achieve the goal of safety production without accidents in winter.

1. Patrol inspection. The safety officer or the person in charge of the department strengthens the patrol inspection, so that the morning, noon and evening three shifts inspect the area they are responsible for, and the abnormal situation is dealt with and recorded and reported in a timely manner.

2. Hot work. Involving fire, such as "welding" operations, before the operation to fill in the operation permit, with the consent of the supervisor to get the permit before the operation, there should be a safety officer to assist in the supervision, after the operation to check the site to confirm that there is no sparks or smoking combustibles.

3. Safe use of electricity. Do not lap the line without permission; High-power electrical equipment, especially electric heating equipment, should be shut down and powered off in time after use; Replace the line in time if it is broken; When the circuit protection trips, find the cause and deal with it in time!

4. Fire-fighting equipment. Regularly inspect and maintain fire-fighting equipment, such as whether the pressure of the fire extinguisher is enough, whether the accessories of the fire hydrant are in good condition, whether the smoke detector is in a normal monitoring state, etc.!

Precautions for safe production of high temperature in summer: safety of electricity, heat stroke prevention and cooling safety, safety of confined space, safety of pressure protection, wearing of personal protective equipment, etc.

In summer, the weather is hot, humid and rainy, and the insulation performance of electrical equipment is reduced, and tools are required for safety testing at the production site.

In summer, the high temperature and dryness, continuous overload work, easy to cause heat stroke accidents, production front-line personnel need to be equipped with heatstroke prevention and cooling drugs.

Thunderstorms are increasing, and the lightning protection and grounding of building facilities and machinery and equipment are tested and regularly inspected, and the lightning protection work must be effectively done.