The correct way to cut nails is hotly searched, what is the correct way to cut nails?

In fact, it is to cut along your own nail line, and you must leave a certain amount of space to avoid cutting your own nail flesh.

Nail trimming is for personal hygiene, and everyone has their own way of cutting their nails. There's no specific way to say what's right, as long as it doesn't hurt your fingers.

The Internet believes that cutting the nails of the feet must be cut flat, and the two sides cannot be cut off, which will cause paronychia.

Cut from the thumb, in order from the largest to the smallest, and eat until the last cut to the little thumb, which is the most correct way.

When cutting nails, don't cut too deeply, keep cutting horizontally, leave a certain distance, and play a role in protecting your fingers.

1. Cut the scissors along the side of the nail.

2. When cutting the side, the nails should be separated from the **.

3. Cut around the contour of the nail.

5. When cutting, you should cut slowly and flatly, and do not force nail clippers or scissors into the nails and take out the scissors. The top of the nail left after cutting is slightly longer than the nail flesh, and if the nail has sharp corners, be sure to round those sharp corners.

6. Human fingernails grow at an average rate of about millimeters per week, so fingernails can be cut once or twice a week.

1. Nails should be cut flat: after cleaning the hands, use a nail clipper to cut the middle of the nail first, and then trim both sides, when trimming, the hand should be placed flat, the nail clipper should be cut flat, do not cut the nail clipper deep into the nail crack, generally the nail nails should be cut into an arc, and the toenails should be cut flat, which can prevent ingrown nails.

2. The length of the nail should be appropriate: the length of the nail should be moderate, not too short, and it is best to leave a 1-2 mm edge, which can give full play to the protective role of the nail, and prevent damage while avoiding the nail from entering the flesh to form a nail inlay.

3. Nail trimming after cutting: There is another important step after cutting the nails, which is to trim the nails, trim the nails with nail grinding tools to prevent the nails from scratching the skin, and the dirt in the nails should be cleaned with soap after the nails are trimmed, and the bacteria breed, and then apply hand cream to the hands.

4. Nails are cut once a week: the growth rate of fingernails is millimeters per day, toenails grow millimeters every day, and they can grow 3-4 mm in a month, and the growth rate of nails will also change according to the environment, human health, seasons, etc., it is generally recommended to trim fingernails once a week, and toenails every two weeks.

Here's how to look good with nail clipping:Tools Raw materials: nail clippers, nail files.

1. Prepare our tools for cutting nails.

2. The nails are so long, not only makes people feel sloppy, but also gets in the way.

3. Cut the nails short with nail clippers first, and cut them along the arc of the nail bed, it will be very round, not too sharp, generally leaving two millimeters is enough, and I prefer to be shorter, so I leave one millimeter.

4. Use a nail file to smooth the edge of the freshly cut nail, and after polishing, you can slide it on the back of your hand until you don't paddle.

5. Carefully cut off the barbs on the edge of the nails, rub hand cream, and the rough nails will be trimmed.

Cut both sides first, cut both sides obliquely, if the nail is already short after cutting, you can directly use the nail frustration or nail clipper to trim, if the nail is long and cut both sides and then cut the middle, repair it into a round tip, in fact, it is very simple....

Nails are a part of our body, and their maintenance is also an important part of our daily life. Whether the nail trimming method is correct or not is not only related to the health of the nails, but also related to the beauty of the hands. So, what's the right way to trim your nails?

Let's take a closer look.

After cutting the nails, we can use a nail file to smooth the edges of the nails to avoid the edges of the nails from piercing**. When sanding your nails, you should follow the natural curvature of your nails and not use too much force to avoid damaging your nails.

Before we start trimming our nails, we need to prepare some tools like nail clippers, nail clippers, nail files, nail brushes, etc. These tools need to be kept clean and disinfected with alcohol or hot water before use to avoid bacterial infection.

First of all, we need to cut the nails short, so that we can avoid the pain and infection caused by the entry of the nails when they are too long. When cutting your nails, you should cut them according to the natural curvature of the nails, not too short to avoid hurting the root of the nails. Also, to avoid tears on the edges of the nails, we can trim them a little at the four corners of the nails.

1. The nail is very fragile and can be cut after washing, the appearance of the nail makes people look very hard, but in fact, it is so fragile that it is easy to seep water. The most obvious example of this is when you notice that your nails become soft every time you take a shower. Because the speed at which water penetrates into the nail is several times faster than the speed at which it penetrates into the outer layer, the nail will be soaked in water for too long and will swell and shrink due to moisture, and the nail will be easy to break.

The nails will become soft after bathing, and the flat and oblique mouths of nail clippers should be slowly trimmed from one side, do not start from the middle and cut the whole nail at once, so that the nails are easy to break under too much pressure, and then use a file to gently round from the sides to the middle, pull out the flesh thorns, and finally apply nutritional oil to the root of the nail.

2. The nails should not be cut too short, because the nails are easy to hide dirt and dirt and breed bacteria. Therefore, many people are used to cutting their nails very short. As everyone knows, this not only does not protect the fingers, but also has the opposite effect.

Nails cut too short can easily cause injury to the nail bed during work or housework. The soft tissue at the front of the finger is not covered by the nail, and the tip of the nail grows inward, which can induce paronychia and susceptibility to fungal attack in severe cases.

3. Cut the knife flat, repair the sharp corners, cut it flat, and don't stuff the nail clippers into the nails and cut them; If your nails have sharp corners, be sure to round them. In addition, it is necessary to deal with the flesh thorns on the side of the nails in a timely manner, and they cannot be pulled out directly by hand, so as not to hurt the surrounding tissues, and carefully cut off the flesh thorns with nail clippers.