Which is better to soak in water on the wooden floor, and how to deal with the soaking in water on t

Sports wood flooring is soaked and swollen by water: sports wood flooring is water-abore, and the sports wood floor after being soaked in water is easy to swell and deform, which directly affects the use of sports wood flooring. Generally, when encountering this kind of problem, do not remove the wooden floor without permission, and contact a professional wooden floor installer to repair and deal with it according to the soaking situation.

1. Drain the surface water on the floor in the shortest possible time.

2. If it is a small area soaked in water, it is recommended not to pry up the laminate floor to dry, which is easy to cause hard damage to the laminate floor, and it is likely to cause serious consequences that cannot be restored. It is best to quickly remove the baseboard of the floor to expose the expansion joints, which usually take about three to ten days to dry out, depending on the amount of seepage.

3. At the same time, you can also use a vacuum cleaner to suck up water vapor in the splicing gap of the soaked floor, or take a hair dryer to dry it with cold air, but do not use hot air to blow it to prevent the surface from drying out and deforming due to heating and drying.

Fourth, if it is a large area of soaking water, the floor should be notified of after-sales service in time, and in the case of trying to keep the floor not deformed, the floor should be carefully pried up, and placed in the ventilation to dry according to the "well" shape, and the weight generated by its stacking to prevent deformation occurs, pay attention not to be exposed to the sun, under normal circumstances, the wood floor with better quality can be used again, such as the European floor of the big brand, etc.

Fifth, the floor that has been soaked in water warped and deformed, because the thickness of the entire board is uneven, the force is different, and it is easy to appear pits.

Sixth, after all, post-rescue is passive, and taking precautions is the best choice. Usually, pay more attention to the window not to open wide to prevent rain; When you go out of the bath and enter the bedroom, you have to change your shoes; Always check the air conditioner, plumbing pipes, and washing machine for water leaks. After the floor is soaked in water, if you don't know how to deal with it, you should notify the flooring dealer as soon as possible to minimize the damage to the floor.

Dear, hello Xiang mess ruined, I am happy to answer for you: the difference between a soaked wooden floor and a non-soaked water Answer: After the soaked wooden floor is damp, it will swell and bulge with the rock.

The waterproof ability of the wooden floor is relatively poor, so try not to soak in water if you can not soak in water, if the floor is soaked in water because of some force majeure factors, then you should pay attention. If your house has good lighting, open all the windows and let the sun dry the floors or air dry. If your house is not well lit, it will be more troublesome, open the windows for ventilation is certain, and then be careful that you have to find a way to mop the floor clean, and then dry the floor with heating things.

Soak in water in a small area

1. Water entering the floor, regardless of the area, the first thing is to dry the water on the surface, so use a dry rag to dry the moisture on the surface of the floor.

2. After the water is dried, there are still water stains in the cracks of the floor, so you should further dry the water stains. You can choose to use a vacuum cleaner or hair dryer for treatment, but do not use a hot air shield when using a hair dryer, otherwise the floor surface will be deformed due to heat.

3. Observe the warping of the floor, if it is only a small area of warping, you can use some heavy objects to press, open the window for ventilation. If there are some places that are not restored after pressing, they can only be partially replaced.

Soak in water over a large area

1. If a large area is soaked in water, the first step is to wipe the surface of the floor first, but only to wipe dry, the problem can not be solved, and the soaked part of the water needs to be pried up, and placed in a ventilated place according to the "well" shape to dry.

2. But not all floors are more suitable for this method, which is appropriate for solid wood flooring, but for laminate flooring, it may not be able to be used again after prying, so it is best to remove the edge strip and expose the edge seams of the floor to facilitate water vapor evaporation.